4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING D 1 REVISIONS DATE 1/10/11 DESCRIPTION REV D ECN #3082 ENGR EMH D 722.12 28.43 699.52 27.54 PROTECTIVE COVER NOT SHOWN IN THIS VIEW FOR DIMENSIONAL CLARITY. 19.37 .763 HANDLE SHOWN IN CLOSED POSITION. 90 DEG HANDLE ROTATION TO OPEN POSITION C C 134 5.275 SHAFT SUPPORT REQUIRED AT THIS END. 38.74 1.525 B 17.70 .70 27.94 1.100 B HANDLE ASSEMBLY WILL SHIP UNATTACHED. TO ASSEMBLE, INSTALL OVER SHORT SHAFT AND TIGHTEN THE SET SCREW USING THE .050" ALLEN WRENCH THAT IS INCLUDED. CUSTOMER DRAWING A 4-40 UNC VIRGINIA PANEL CORPORATION 5.30 .21 .32 WWW.VPC.COM ICON ITA ASM W/EXT SHAFT 2. MAXIMUM CONTACT MATING FORCE SHOULD NOT EXCEED 100 LBS [444.8 N] DIMENSIONS ARE SHOWN AS: 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 A [MILLIMETERS] INCHES 2 SIZE C CAGE CODE 18117 SCALE: 1:1 DWG.NO. 410123110 1 410123110 6/6/08 SHEET REV D 1 OF 1