4 3 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING D 98.81 3.89 18.92 .75 60.96 2.40 3.18 .13 2 7.62 .30 REF. 106.43 2 4.19 MIN. 3 x 192 PCB ADAPTER MODULES P/N 510150125 1 REVISIONS REV DESCRIPTION A DRAWING ORIGINATION - ECN #09-310-0096 DATE ENGR E HUSTED 10/29/09 D 96 POSITION TRIPADDLE MODULE P/N 510104136 175.01 6.89 C C 167.64 6.60 161.29 6.35 RECOMMENDED PANEL CUTOUT 167.64 6.60 20.19 .80 B 3.26 FOR MOUNTING USE: .13 THRU HOLE, 4-40 OR M3 METRIC TAPPED HOLE (SUPPLIED WITH 4 X 4-40 SCREWS, LOCK WASHERS & NUTS) 60.96 2.40 101.35 3.99 MATING FACE 3.68 .15 CUSTOMER DRAWING VIRGINIA PANEL CORPORATION WWW.VPC.COM 4. INCLUDED MOUNTING HARDWARE: (4) 4-40 x .375 SCREWS, (4) #4 WASHERS, AND (4) 4-40 HEX NUTS. 3. 3/32" ALLEN WRENCH INCLUDED FOR MODULE MOUNTING. 2 MINIMUM DISTANCE SHOULD INCREASE WHEN USING A CUSTOM ENCLOSURE LARGER THEN 4.0 INCHES [102 mm] ON THE ITA. 1. FOR APPLICATION USE AND CARE INFORMATION CONSULT VPC USERS GUIDE @ WWW.VPC.COM 101.35 3.99 DIMENSIONS ARE SHOWN AS: [MILLIMETERS] INCHES NOTES: 3 B 77.44 3.05 3.81 R.15 MAX. TYP. 6. FOR OPTIMUM PERFORMANCE AND SYSTEM LONGEVITY, DISTRIBUTE THE CONTACTS EVENLY. 5. MATING ITA - 410124118. 4 13.97 .55 19.05 .75 7. MAXIMUM CONTACT MATING FORCE SHOULD NOT EXCEED 120 LBS [533 N]. A 11.56 .46 2 SIZE B RCV ICN 960 W/ 3 x QP PCBs & 1 x 96TP CAGE CODE 18117 DWG.NO. SCALE: 1:2 310124118 310124118 SHEET 1 REV A 1 OF 1 A