4 3 2 1 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING REVISIONS 76.93 3.03 D DATE 3/21/12 DESCRIPTION REV B ECN #3925 ENGR R HERRON 39.37 1.55 D HEX CAVITY 2X FOR OPTIONAL KEYING PINS (KIT P/N 310113461) HANDLE SHOWN IN ENGAGED POSITION. ROTATE 180° COUNTER-CLOCKWISE FOR DISENGAGED POSITION. MODULE TIER "A" C C MODULE TIER "B" 4 222.84 8.77 B B A #6 GROUNDING SCREW A SECTION A-A 138.12 5.44 RCV MATING VIEW 3 ATTACH PROTECTIVE COVER HERE 5. MAXIMUM CONTACT MATING FORCE SHOULD NOT EXCEED 100 LBS [444.8 N] A 4 MAX CABLE BUNDLE AREA = 1.97 SQ. IN. OR A 1.58"/40.13mm DIAMETER BUNDLE CLAMP CAN BE INVERTED FOR SMALLER CABLE BUNDLES 3 PROTECTIVE COVER INCLUDED WITH ASSEMBLY (NOT SHOWN) 2. MATERIALS: FRAME: ALUMINUM ALLOY - Ni PLATED HARDWARE: STAINLEES STEEL ALLOY DRIVE UNIT: BRONZE ALLOY & STAINLESS STEEL ALLOY PLASTIC COMPONENTS & PROTECTIVE COVER: BLACK THERMOPLASTIC CABLE CLAMP HOUSING: ANODIZED ALUMINUM ALLOY CABLE CLAMP: ALUMINUM ALLOY, POWDER COATED 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 CUSTOMER DRAWING A VIRGINIA PANEL CORPORATION WWW.VPC.COM DIMENSIONS ARE SHOWN AS: [MILLIMETERS] INCHES 2 ITA, EMI ICON w/ EXTENDED CABLE CLAMP SIZE C CAGE CODE 18117 SCALE: 1:1 DWG.NO. 410123118 1 410123118 4/20/11 SHEET REV B 1 OF 1