8 7 6 5 4 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 482.47 19.00 19.10 .752 3 1 REV H ECN #5461 REVISIONS DESCRIPTION DATE 8/29/14 ENGR S MARSHALL 445.47 17.538 D D .13[3.3] .21[5.3] M4X0.7 - 6H .13[3.2] GROUND HOLE LOCATION 27.94 1.10 WIRING SIDE VIEW C C 9.19 .36 465.20 18.315 562.74 22.16 492 19.37 121.29 4.78 37.72 1.49 46.23 1.82 21.56 .85 B 88.90 3.500 KEYING POSITION SEE NOTE (2) 69.37 2.73 B KEYING POSITION SEE NOTE (2) 180.34 7.10 46.84 1.84 89.97 3.54 239.57 9.43 CLEARANCE HOLE F/10-32 OR M5 PAN HEAD SCREW TYP. 4 PLCS. TOTAL. FLANGES NOT ATTACHED FOR SHIPMENT. TO BE ASSEMBLED BY CUSTOMER. A A CUSTOMER DRAWING VIRGINIA PANEL CORPORATION WWW.VPC.COM G20 Receiver & Flange Kit 2. KEYING PIN KIT OPTIONAL P/N 310113461 1. FOR APPLICATION USE AND CARE INFORMATION CONSULT VPC USERS GUIDE @ WWW.VPC.COM DIMENSIONS ARE SHOWN AS: NOTES: 8 7 [MILLIMETERS] INCHES 6 5 4 3 2 SIZE D CAGE CODE 18117 DWG.NO. SCALE: 1:2 310120142 310120142 REV H 9/1/10 SHEET 1 OF 1 1