TS9011 250mA Low Quiescent Current CMOS LDO SOT-23 Pin Definition: 1. Ground 2. Output 3. Input SOT-89 Pin Definition: 1. Ground 2. Input 3. Output General Description TS9011 is a positive voltage regulator developed utilizing CMOS technology featured very low power consumption, low dropout voltage and high output voltage accuracy. Built in low on-resistor provides low dropout voltage and large output current. A 1µF or greater can be used as an output capacitor. TS9011 are prevented device failure under the worst operation condition with both thermal shutdown and current fold-back. These series are recommended for configuring portable devices and large current application, respectively. Ordering Information Features ● Dropout Voltage 0.4V (typ) @ Io=250mA ● ● Output Current up to 250mA Low Power Consumption, 2µA (typ) ● Output Voltage ±2% ● ● Internal Current Limit Thermal Shutdown Protection Part No. Package Packing TS9011xCX RF SOT-23 3kpcs / 7” Reel TS9011xCY RM SOT-89 1kpcs / 7” Reel Note: Refer to detail ordering information table. Applications ● Battery-operated systems ● Microprocessor reset circuitry ● ● Memory battery back-up circuits Power-on reset circuits ● Power failure detection ● System battery life and charge voltage monitors Block Diagram Typical Application Circuit * Tantalum capacitor for Input & Output capacitor are recommended 1/7 Version: F14 TS9011 250mA Low Quiescent Current CMOS LDO Absolute Maximum Ratings Parameter Input Supply Voltage Output Current SOT-23 SOT-89 Power Dissipation SOT-23 Thermal Resistance - Junction to Ambient SOT-89 Symbol Limit Unit VIN IO 12 PD / (VIN – VO) V V 0.30 0.50 333 PD RӨJA W o 200 -40 ~ +85 Operating Ambient Temperature TOPR Junction Temperature Range -40 ~ +150 TJ Storage Temperature Range TSTG -65 ~ +150 Notes: Stress above the listed absolute rating may cause permanent damage to the device. C/W o C o C C o Electrical Characteristics (TA=25oC, unless otherwise noted) Parameter Output Voltage Maximum Output Current Input Stability Load Regulation (Note1) Dropout Voltage (Note 2) Conditions VIN=Vo + 1V, Io =40mA, Min Typ Max TS90115 4.90 5.0 5.10 TS9011S TS9011P TS9011K 3.23 2.94 3.3 3.0 3.36 3.06 2.45 2.5 2.55 TS9011D TS9011A 1.76 1.47 1.8 1.5 1.83 1.53 250 -- -0.2 -0.3 -- 40 80 -- 40 90 VIN=Vo+1V, VO+1V ≤ Vin ≤ VO+2V, Io=1mA VIN=Vo+1V, 1mA≤IL≤100mA TS90115 TS9011S TS9011P VIN=Vo+1V, 1mA≤IL≤80mA TS9011K TS9011D Io=250mA Io=200mA TS9011A TS90115 TS9011S --- 400 400 600 650 Io=160mA Io=160mA Io=120mA Io=100mA TS9011P TS9011K TS9011D TS9011A ----- 400 400 400 850 700 700 750 1000 Unit V mA % mV mV VIN=Vo+1V, Io=0A µA Quiescent Current -2 5 VOUT < 0.4V mA Output Current Limit -400 -At f=100KHz, Io=10mA, dB Power Supply Rejection Ratio -30 -Output Voltage Temperature o -100 -ppm/ C Coefficient (Note 3) Notes: 1. Regulation is measured at constant junction temperature, using pulsed ON time. 2. Dropout is measured at constant junction temperature, using pulsed ON time, and the criterion is VOUT inside target value +/-2%. 3. Guaranteed by design. 2/7 Version: F14 TS9011 250mA Low Quiescent Current CMOS LDO Electrical Characteristics Curve (TA=25oC, unless otherwise noted) Figure 1. Output Voltage vs. Output Current Figure 2. Output Voltage vs. Input Voltage Figure 3. Quiescent Current vs. Input Voltage Figure 4. Short Circuit Current vs. Input Voltage 3/7 Version: F14 TS9011 250mA Low Quiescent Current CMOS LDO Ordering information Voltage SOT-23 SOT-89 1.5V TS9011ACX RF 1.8V TS9011DCX RF TS9011DCY RM 2.5V TS9011KCX RF TS9011KCY RM 3.0V TS9011PCX RF TS9011PCY RM 3.3V TS9011SCX RF TS9011SCY RM 5V TS90115CX RF TS90115CY RM Packing code information Packing 3kpcs / 7" Reel 1kpcs / 7" Reel 4/7 Version: F14 TS9011 250mA Low Quiescent Current CMOS LDO SOT-23 Mechanical Drawing Unit: Millimeters Marking Diagram E = Product Code Y = Year Code M = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) L = Lot Code X = Fixed Output Voltage Code A=1.5V, D=1.8V, K=2.5V, P=3.0V, S=3.3V, 5=5.0V. 5/7 Version: F14 TS9011 250mA Low Quiescent Current CMOS LDO SOT-89 Mechanical Drawing Unit: Millimeters Marking Diagram Y = Year Code M = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) L = Lot Code X = Fixed Output Voltage Code D=1.8V, K=2.5V, P=3.0V, S=3.3V, 5=5.0V. 6/7 Version: F14 TS9011 250mA Low Quiescent Current CMOS LDO Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 7/7 Version: F14