RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~RC2512B/C/D RC(B-D) - CTR=100ppm Chip Resistor Features RC0201 RC0201 RC0201 Complete High precision SMD family Higher component and equipment reliability Small Size and light weight Excellent heat resistance and moisture resistance Highly reliable multilayer electrode construction Suitable for all soldering process Refer to Chip Resistor RCT family for CTR=50ppm RoHS Compliant and Halogen Free Applications For general purpose applications For laptop and notebook computer, memory module, digital camera and telecommunication equipment Constructions The resistor is constructed on the alumina substrate body. Top electrodes are added to each end and connected with resistive paste on top surface of the alumina substrate. The resistive layer is made by resistive paste that is prepared to approach the nominal value. Laser trimming process makes the resistance meet the Nominal value The resistive layer is protected by primary overcoat and secondary overcoat. The barrier layer is added to edge electrodes for platting with external electrode,making the resistor easily mounted on the PCB TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 (661)-257-6060 (661)-257-6415 Rev. E/CW Page 1 of 9 RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~ RC2512B/C/D Dimensions (in mm) Type Size Inch (mm) L W H A B Average Weight RC0402 0402(1005) 1.00 ± 0.05 0.50± 0.05 0.35 ± 0.05 0.20 ± 0.10 0.20 ± 0.10 0.620 mg RC0603 0603(1608) 1.60 ± 0.10 0.80± 0.10 0.45 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 2.042 mg RC0805 0805(2012) 2.00 ± 0.10 1.25± 0.10 0.50 ± 0.10 0.35 ± 0.20 0.40 ± 0.20 4.368 mg RC1206 1206(3216) 3.10 ± 0.10 1.55± 0.10 0.55 ± 0.10 0.50 ± 0.25 0.50 ± 0.20 8.947 mg RC1210 1210(3225) 3.20 ± 0.20 2.60± 0.15 0.55 ± 0.10 0.50 ± 0.25 0.50 ± 0.20 15.959 mg RC2010 2010(5025) 5.00 ± 0.20 2.50± 0.15 0.55 ± 0.10 0.60 ± 0.25 0.50 ± 0.20 24.241 mg RC2512 2512(6432) 6.35 ± 0.20 3.20± 0.15 0.55 ± 0.10 0.60 ± 0.25 0.50 ± 0.20 39.448 mg Marking Code 1. RC0402 is without marking due to the size is too small. 2. RC0603~RC2512: 2.1.E24 series, 3 digits Code, the first two digits are significant figures; the third digit is number of zeros to follow. Letter “R” is as decimal point; 2.2. E96 series, 4 digits Code(except 0603 size), the first three digits are significant figures; the fourth digit is number of zeros. Letter “R” is as decimal point; 2.3.E96 series with special marking code for 0603 Size, see below table (Page 8). No Marking Item 1 683 = 68x103 Ω = 68KΩ Item 2.1 6812 = 681x102 = 68.1KΩ Item 2.2 49X=316 x10-1 =31.6Ω Item 2.3 Rev. E/CW www.taitroncomponents.com Page 2 of 9 RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~ RC2512B/C/D Absolute Maximum Ratings & Electrical Characteristics Type Size Inch (mm) RC0402 0402(1005) RC0603 0603(1608) RC0805 0805(2012) RC1206 1206(3216) RC1210 1210(3225) RC2010 2010(5025) RC2512 2512(6432) Tolerance (E24 &E96) B: ±.1% C: ±.25% D:±.5% B: ±.1% C: ±.25% D:±.5% B: ±.1% C: ±.25% D:±.5% B: ±.1% C: ±.25% D:±.5% B: ±.1% C: ±.25% D:±.5% B: ±.1% C: ±.25% D:±.5% B: ±.1% C: ±.25% D:±.5% Power Rating @70˚C MAX. MAX. Working Overload Voltage Voltage TCR ( ppm/℃) Resistance Range Operating Temperature Range 1/16W 50V 100V ±100 10Ω ~ 1MΩ -55℃~+125℃ 1/10W 50V 100V ±100 10Ω ~ 1MΩ -55℃~+125℃ 1/8W 150V 300V ±100 10Ω ~ 1MΩ -55℃~+125℃ 1/4W 200V 400V ±100 10Ω ~ 1MΩ -55℃~+125℃ 1/3W 200V 400V ±100 10Ω ~ 1MΩ -55℃~+125℃ 3/4W 200V 400V ±100 10Ω ~ 1MΩ -55℃~+125℃ 1W 250V 500V ±100 10Ω ~ 1MΩ -55℃~+125℃ Power Derating Curve Rated Power dissipation Ratio (%) For resistors operate in the ambient temperature over 70˚C, loading power ratio will derate in accordance with following curve. Ambient Temperature (℃) Rev. E/CW www.taitroncomponents.com Page 3 of 9 RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~ RC2512B/C/D Soldering Condition IR Reflow soldering Wave soldering (flow soldering) Test and Requirements Test Item Test Method Requirement Test Condition ±.1% & ±.25% &±.5% Temperature Coefficient of Resistance(T.C.R.) JIS C 5201 4.8 IEC 60115-1 4.8 -55°C~+125°C,20°C is the reference temperature Within the specification Short Time Overload JIS C 5201 4.13 IEC 60115-1 4.13 2.5 times Vw or max. overload voltage for 5 seconds ±(1.0%+0.05Ω) Insulation Resistance JIS C 5201 4.6 IEC 60115-1 4.6 Max. overload voltage for 1 minute ≥10G Voltage Proof JIS C 5201 4.7 IEC 60115-1 4.7 1.42 times Vw (RMS) for 1 minute no breakdown or flashover Substrate Bending Test JIS C 5201 4.33 IEC 60115-1 4.33 Bending once for 5 Seconds,2010,2512 Size 2 mm,other size 3mm ±(1.0%+0.05Ω) Resistance to soldering heat JIS C 5201 4.18 IEC 60115 4.18 260±5°C for 10 seconds ±(0.5%+0.05Ω) Leaching JIS C 5201 4.18 IEC 60115 4.18 260±5°C for 60 seconds Individual leaching area <=5% and total leaching area <=10% Solderability JIS C 5201 4.17 IEC 60115-1 4.17 245±5°C for 3 seconds. >95% coverage Endurance at upper category temperature JIS C 5201 4.23 IEC 60115-1 2.23.2 at +125°C for 1000 hrs ±(1.0%+0.05Ω) Rapid change of temperature JIS C 5201 4.19 IEC 60115-1 4.19 -55°C to +125°C, 5 cycles ±(0.5%+0.05Ω) Rev. E/CW www.taitroncomponents.com Page 4 of 9 RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~ RC2512B/C/D Damp heat with load JIS 5201 4.24 Endurance JIS C 5201 4.25 IEC 60115-1 4.25.1 40±2°C, 90~95% R.H. and max. working voltage for 1000 hrs with 1.5hrs “ON” and 0.5 hrs “OFF” 70±2°C, Vw or Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” ±(2.0%+0.10Ω) ±(2.0%+0.10Ω) Note: Vw：Rated Continuous Working Voltage. Vw= √Rated power (P) × Resistance value (R) Packing Information: Paper Tape Dimensions (in mm) Type A B W E F P0 P1 P2 ψD0 T RC0402 0.65±0.1 1.15±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.5+0.1/-0 0.45±0.1 RC0603 1.10±0.1 1.90±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.5+0.1/-0 0.70±0.1 RC0805 1.60±0.1 2.40±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.5+0.1/-0 0.85±0.1 RC1206 1.90±0.1 3.50±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.5+0.1/-0 0.85±0.1 RC1210 2.80±0.1 3.50±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.5+0.1/-0 0.85±0.1 Rev. E/CW www.taitroncomponents.com Page 5 of 9 RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~ RC2512B/C/D Embossed Plastic Tape Dimensions(in mm) Type A B W E F P0 P1 P2 ψD0 T RC2010 2.80±0.2 5.50±0.2 12.0±0.3 1.75±0.1 5.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05 1.5+0.1/-0 Max1.2 RC2512 3.50±0.2 6.70±0.2 12.0±0.3 1.75±0.1 5.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05 1.5+0.1/-0 Max1.2 Reel Quantity & Dimensions (in mm) Type Reel Diameter Reel Quantity RC0402 ψA ψB ψC W T 180+0/-3 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5 180+0/-3 60+1/-0 13.0±0.5 13.0±0.5 15.5±0.5 10000 RC0603 RC0805 RC1206 7” 5000 RC1210 RC2010 4000 RC2512 Rev. E/CW www.taitroncomponents.com Page 6 of 9 RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~ RC2512B/C/D Carton Information Type PCS per Carton RC0402 600,000 Carton Size RC0603 RC0805 300,000 RC1206 RC2010 400X400X200 ( in mm) 192,000 RC2512 Recommend Soldering PAD (in mm) Type A B C I RC0402 1.40 0.60 0.45 0.50 RC0603 2.10 0.90 0.60 0.90 RC0805 2.60 1.30 0.70 1.20 RC1206 3.80 1.60 0.90 2.00 RC1210 3.80 2.80 0.90 2.00 RC2010 5.60 RC2512 7.00 2.80 3.50 0.90 1.60 3.80 3.80 Rev. E/CW www.taitroncomponents.com Page 7 of 9 RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~ RC2512B/C/D Table - E-96 series Special marking code (0603 Size) Code R value Code R value Code R value Code R value Code R value Code R value Code R value Code R value 01 100 13 133 25 178 37 237 49 316 61 422 73 562 85 750 02 102 14 137 26 182 38 243 50 324 62 432 74 576 86 768 03 105 15 140 27 187 39 249 51 332 63 442 75 590 87 787 04 107 16 143 28 191 40 255 52 340 64 453 76 604 88 806 05 110 17 147 29 196 41 261 53 348 65 464 77 619 89 825 06 113 18 150 30 200 42 267 54 357 66 475 78 634 90 845 07 115 19 154 31 205 43 274 55 365 67 487 79 649 91 866 08 118 20 158 32 210 44 280 56 374 68 499 80 665 92 887 09 121 21 162 33 215 45 287 57 383 69 511 81 681 93 909 10 124 22 165 34 221 46 294 58 392 70 523 82 698 94 931 11 127 23 169 35 226 47 301 59 402 71 536 83 715 95 953 12 130 24 174 36 232 48 309 60 412 72 549 This table shows the first two digits for the three-digit EIA-96 part marking scheme. -2 -1 0 1 2 3 4 5 The third character is the letter of multiplier: Y=10 X=10 A=10 B=10 C=10 D=10 E=10 F=10 84 732 96 976 How to Order RC 0603 B 103 - xx - RG70 Packing Code: RG70: 7”reel in Tape and Reel, RoHS and Halogen Free Factory Location Code Resistance Code: 103:10 x103=10KΩ (E24) 1003=100 x103=100KΩ (E96) 10R0=10.0Ω (E24) Tolerance Code: B: ±.1%; C: ±.25%; D: ±.5% Size Code in inch(mm): 0603(1608): 1.6×0.8(mm) Refer Size table for detail Chip Resistor – High Precision Rev. E/CW www.taitroncomponents.com Page 8 of 9 RC(B-D) - CTR=100ppm Chip Resistor RC0402B/C/D~ RC2512B/C/D How to contact us US HEADQUARTERS 28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162 Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONENTS INCORPORATED TAIWAN, TAIPEI 6F., No.190, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 23146, Taiwan R.O.C. Tel: 886-2-2913-6238 Fax: 886-2-2913-6239 TAITRON COMPONENT TECHNOLOGY, SHANGHAI CORPORATION METROBANK PLAZA,1160 WEST YAN’AN ROAD, SUITE 1503, SHANGHAI,200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-2302-5027 CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, 200030, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. E/CW www.taitroncomponents.com Page 9 of 9