RCA0402 - Taitron Components, Inc.

THICK FILM CHIP RESISTOR
Anti-Sulfurated
RCA0402~RCA2512
Thick Film Chip Resistor – Anti-Sulfurated
Features
•
•
•
•
•
•
High performance to prevent Sulfuration in a Sulfur containing environment
Small Size and light weight
Excellent heat resistance and moisture resistance
Highly reliable multilayer electrode construction
Suitable for all soldering process
RoHS Compliant and Halogen Free
Applications
• Central control circuit of Automotive application
• Any equipments in Qxidation conditions
Constructions
• The resistor is constructed on the alumina substrate body.
• Top electrodes are added to each end and connected with
resistive paste on top surface of the alumina substrate.
• The resistive layer is made by resistive paste that is prepared
to approach the nominal value.
• Laser trimming process makes the resistance meet the
Nominal value
• The resistive layer is protected by primary overcoat and
secondary overcoat.
• The barrier layer is added to edge electrodes for platting
with external electrode,making the resistor easily mounted on the PCB
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON
Fax: (800)-TAITFAX
(800)-824-8766
(800)-824-8329
(661)-257-6060
(661)-257-6415
Rev. D/LX
Page 1 of 9
Thick Film Chip Resistor – Anti-Sulfurate
RCA0402~ RCA2512
Dimensions (in mm)
Type
Size
Inch (mm)
L
W
H
A
B
Average
Weight
RCA0402
0402(1005)
1.00 ± 0.05
0.50± 0.05
0.35 ± 0.05
0.20 ± 0.10
0.20 ± 0.10
0.620 mg
RCA0603
0603(1608)
1.60 ± 0.10
0.80± 0.10
0.45 ± 0.10
0.30 ± 0.20
0.30 ± 0.20
2.042 mg
RCA0805
0805(2012)
2.00 ± 0.10
1.25± 0.10
0.50 ± 0.10
0.35 ± 0.20
0.40 ± 0.20
4.368 mg
RCA1206
1206(3216)
3.10 ± 0.10
1.55± 0.10
0.55 ± 0.10
0.50 ± 0.25
0.50 ± 0.20
8.947 mg
RCA1210
1210(3225)
3.20 ± 0.20
2.60± 0.15
0.55 ± 0.10
0.50 ± 0.25
0.50 ± 0.20
15.959 mg
RCA2010
2010(5025)
5.00 ± 0.20
2.50± 0.15
0.55 ± 0.10
0.60 ± 0.25
0.50 ± 0.20
24.241mg
RCA2512
2512(6432)
6.35 ± 0.20
3.20± 0.15
0.55 ± 0.10
0.60 ± 0.25
0.50 ± 0.20
39.448 mg
Marking Code
1. RCA0402 is without marking due to the size is too small.
2. RCA0603~RCA2512:E24 series,3 digits Code, the first two digits are significant figures; the
third digit is number of zeros to follow.
No Marking
683 = 68x103 Ω
= 68KΩ
Rev. D/LX
www.taitroncomponents.com
Page 2 of 9
Thick Film Chip Resistor – Anti-Sulfurate
RCA0402~ RCA2512
Absolute Maximum Ratings & Electrical Characteristics
Type
Size
Inch (mm)
RCA0402 0402(1005)
RCA0603 0603(1608)
RCA0805 0805(2012)
RCA1206 1206(3216)
RCA1210 1210(3225)
RCA2010 2010(5025)
RCA2512 2512(6432)
Tolerance
(E24)
Power
Rating
@70˚C
F: ±1%
J: ±5%
(E24)
1/16W
F: ±1%
J: ±5%
(E24)
1/10W
MAX.
MAX.
Working Overload
Voltage
Voltage
50V
100V
T.C.R
( ppm/℃)
±200
1 Ω~9.76 Ω
±100
10 Ω~1M Ω
Resistance Range
Operating
Temperature
Range
1Ω ~ 10MΩ
-55℃~+155℃
1Ω ~ 10MΩ
-55℃~+155℃
1Ω ~ 10MΩ
-55℃~+155℃
1Ω ~ 10MΩ
-55℃~+155℃
1Ω ~ 10MΩ
-55℃~+155℃
1Ω ~ 10MΩ
-55℃~+155℃
1Ω ~ 10MΩ
-55℃~+155℃
±200 1.02 MΩ~10M Ω
50V
100V
±200
1 Ω~9.76 Ω
±100
10 Ω~1M Ω
±200 1.02 MΩ~10M Ω
F: ±1%
J: ±5%
(E24)
1/8W
F: ±1%
J: ±5%
(E24)
1/4W
150V
300V
±200
1 Ω~9.76 Ω
±100
10 Ω~1M Ω
±200 1.02 MΩ~10M Ω
200V
400V
±200
1 Ω~9.76 Ω
±100
10 Ω~1M Ω
±200 1.02 MΩ~10M Ω
F: ±1%
J: ±5%
(E24)
1/3W
F: ±1%
J: ±5%
(E24)
3/4W
200V
400V
±200
1 Ω~9.76 Ω
±100
10 Ω~1M Ω
±200 1.02 MΩ~10M Ω
200V
400V
±200
1 Ω~9.76 Ω
±100
10 Ω~1M Ω
±200 1.02 MΩ~10M Ω
F: ±1%
J: ±5%
(E24)
1W
250V
500V
±200
1 Ω~9.76 Ω
±100
10 Ω~1M Ω
±200 1.02 MΩ~10M Ω
*Jumper
Type
Jumper Rated Current
Resistance
Operating Temperature Range
RCA0402
1A
RCA0603
RCA0805
2A
50mΩ (Max.)
RCA1206
RCA1210
2.5A
RCA2010
3.5A
RCA2512
4A
-55℃~+155℃
Rev. D/LX
www.taitroncomponents.com
Page 3 of 9
Thick Film Chip Resistor – Anti-Sulfurate
RCA0402~ RCA2512
Power Derating Curve
Rated Power dissipation Ratio (%)
For resistors operate in the ambient temperature over 70˚C, loading power ratio will derate in
accordance with following curve.
Ambient Temperature (℃)
Soldering Condition
IR Reflow soldering
Wave soldering (flow soldering)
Rev. D/LX
www.taitroncomponents.com
Page 4 of 9
Thick Film Chip Resistor – Anti-Sulfurate
RCA0402~ RCA2512
Test and Requirements
Test Item
Test Method
Test Condition
Requirement
±1%
±5%
Jumper
Temperature
Coefficient of
Resistance(T.C.R.)
JIS C 5201 4.8
IEC 60115-1 4.8
-55°C~+155,20°C is the
reference temperature
Within the specification
Short Time Overload
JIS C 5201 4.13
IEC 60115-1 4.13
2.5 times Vw or max.
overload voltage for 5
seconds
±(1.0%+0.05Ω)
Insulation
Resistance
JIS C 5201 4.6
IEC 60115-1 4.6
Max. overload voltage
for 1 minute
Voltage Proof
JIS C 5201 4.7
IEC 60115-1 4.7
1.42 times Vw
(RMS) for 1 minute
no breakdown or flashover
Substrate Bending
Test
JIS C 5201 4.33
IEC 60115-1 4.33
Bending once for 5
Seconds,2010,2512 size :
2 mm, other Size: 3mm
±(1.0%+0.05Ω)
±(1.0%+0.05Ω)
<50mΩ
Resistance to
soldering heat
JIS C 5201 4.18
IEC 60115 4.18
260±5°C for 10 seconds
±(0.5%+0.05Ω)
±(1.0%+0.05Ω)
<50mΩ
Leaching
JIS C 5201 4.18
IEC 60115 4.18
260±5°C for 60 seconds
no leaching
Solderability
JIS C 5201 4.17
IEC 60115-1 4.17
245±5°C for 3 seconds.
>95% coverage
Endurance at upper
category temperature
JIS C 5201 4.23
IEC 60115-1
2.23.2
at +155°C for 1000 hrs
±(1.0%+0.05Ω)
±(1.5%+0.10Ω)
<50mΩ
Rapid change of
temperature
JIS C 5201 4.19
IEC 60115-1 4.19
-55°C to +155°C, 5 cycles
±(0.5%+0.05Ω)
±(1.0%+0.05Ω)
<50mΩ
±(2.0%+0.10Ω)
±(3.0%+0.10Ω)
<100mΩ
±(2.0%+0.10Ω)
±(3.0%+0.10Ω)
<100mΩ
Damp heat with load
JIS 5201 4.24
Endurance
JIS C 5201 4.25
IEC 60115-1
4.25.1
Sulfur Test
-
40±2°C, 90~95% R.H. or
max. working voltage for
1000 hrs
with 1.5hrs “ON” and 0.5
hrs “OFF”
70±2°C, Vw or Max.
working voltage for 1000
hrs with 1.5 hrs
“ON” and 0.5 hrs “OFF”
3~5ppm,50±2°C,91%~93%
R.H,no power rating for
1000 hrs
-
±(2.0%+0.05Ω)
<50mΩ
≥10G
ΔR±0.5%
Note: Vw:Rated Continuous Working Voltage.
Vw=
√Rated power (P) × Resistance value (R)
Rev. D/LX
www.taitroncomponents.com
Page 5 of 9
Thick Film Chip Resistor – Anti-Sulfurate
RCA0402~ RCA2512
Packing Information:
Paper Tape Dimensions (in mm)
Type
A
B
W
E
F
P0
P1
P2
ψD0
T
RCA0402
0.65±0.1
1.15±0.1
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
2.0±0.05
2.0±0.05
1.5+0.1/-0
0.45±0.1
RCA0603
1.10±0.1
1.90±0.1
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
4.0±0.05
2.0±0.05
1.5+0.1/-0
0.70±0.1
RCA0805
1.60±0.1
2.40±0.2
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
4.0±0.05
2.0±0.05
1.5+0.1/-0
0.85±0.1
RCA1206
1.90±0.1
3.50±0.2
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
4.0±0.05
2.0±0.05
1.5+0.1/-0
0.85±0.1
RCA1210
2.80±0.1
3.50±0.2
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
4.0±0.05
2.0±0.05
1.5+0.1/-0
0.85±0.1
Embossed Plastic Tape Dimensions(in mm)
Type
A
B
W
E
F
P0
P1
P2
ψD0
T
RCA2010
2.80±0.2
5.50±0.2
12.0±0.3
1.75±0.1
5.5±0.05
4.0±0.1
4.0±0.1
2.0±0.05
1.5+0.1/-0
Max1.2
RCA2512
3.50±0.2
6.70±0.2
12.0±0.3
1.75±0.1
5.5±0.05
4.0±0.1
4.0±0.1
2.0±0.05
1.5+0.1/-0
Max1.2
Rev. D/LX
www.taitroncomponents.com
Page 6 of 9
Thick Film Chip Resistor – Anti-Sulfurate
RCA0402~ RCA2512
Reel Quantity & Dimensions (in mm)
Type
Reel
Diameter
Reel
Quantity
RCA0402
ψA
ψB
ψC
W
T
180+0/-3
60+1/-0
13.0±0.2
9.0±0.5
12.5±0.5
180+0/-3
60+1/-0
13.0±0.5
13.0±0.5
15.5±0.5
10000
RCA0603
RCA0805
RCA1206
5000
7”
RCA1210
RCA2010
4000
RCA2512
Carton Information
Type
PCS per Carton
RCA0402
600,000
Carton Size
RCA0603
RCA0805
300,000
RCA1206
RCA2010
400X400X200 ( in mm)
192,000
RCA2512
Rev. D/LX
www.taitroncomponents.com
Page 7 of 9
Thick Film Chip Resistor – Anti-Sulfurate
RCA0402~ RCA2512
Recommend Soldering PAD (in mm)
Type
A
B
C
I
RCA0402
1.40
0.60
0.45
0.50
RCA0603
2.10
0.90
0.60
0.90
RCA0805
2.60
1.30
0.70
1.20
RCA1206
3.80
1.60
0.90
2.00
RCA1210
3.80
2.80
0.90
2.00
RCA2010
5.60
RCA2512
7.00
2.80
3.50
0.90
1.60
3.80
3.80
How to Order
RCA 0603 J 103 - xx - RG70
Packing Code:
RG70: 7”reel in Tape and Reel,
RoHS and Halogen Free
Factory Location Code
Resistance Code:
103:10 x103=10KΩ
Tolerance Code: J: ±5%; F: ±1%
Size Code in inch(mm):
0603(1608): 1.6×0.8(mm)
Refer Size table for detail
Chip Resistor – Anti-Sulfurated
Rev. D/LX
www.taitroncomponents.com
Page 8 of 9
Thick Film Chip Resistor – Anti-Sulfurate
RCA0402~ RCA2512
How to contact us:
US HEADQUARTERS
28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162
Tel: (800) TAITRON (800) 824-8766 (661) 257-6060
Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415
Email: [email protected]
Http://www.taitroncomponents.com
TAITRON COMPONENTS MEXICO, S.A .DE C.V.
BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970
MEXICO
Tel: +52-55-5560-1519
Fax: +52-55-5560-2190
TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA
RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL
Tel: +55-11-5574-7949
Fax: +55-11-5572-0052
TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE
METROBANK PLASA, 1160 WEST YAN’AN ROAD, SUITE 1502, SHANGHAI, 200052,CHINA
Tel: +86-21-5424-9942
Fax: +86-21-5424-9931
Rev. D/LX
www.taitroncomponents.com
Page 9 of 9