RJJ0601JPE Silicon P Channel MOS FET High Speed Power Switching REJ03G1603-0100 Rev.1.00 Nov 21, 2007 Features • Low on-resistance RDS(on) = 8.2 mΩ typ. • Capable of 4.5 V gate drive • High speed switching Outline RENESAS Package code: PRSS0004AE-B (Package name: LDPAK(S)-(1) ) D 2, 4 4 1. Gate 2. Drain 3. Source 4. Drain 1 G 1 2 3 S 3 Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Avalanche current Avalanche energy Channel dissipation Symbol VDSS VGSS ID ID (pulse) Note1 IDR IAPNote3 EARNote3 PchNote2 Value –60 ±20 –90 –360 –90 –40 137 90 Unit V V A A A A mJ W Tch Tstg 150 –55 to +150 °C °C Channel temperature Storage temperature Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1% 2. Value at Tc = 25°C 3. Value at Tch = 25°C, Rg ≥ 50 Ω Thermal Impedance Characteristics • Channel to case thermal impedance θch-c: 1.39°C/W REJ03G1603-0100 Page 1 of 6 Rev.1.00 Nov 21, 2007 RJJ0601JPE Electrical Characteristics (Ta = 25°C) Item Drain to source breakdown voltage Gate to source breakdown voltage Zero gate voltage drain current Gate to source leak current Gate to source cutoff voltage Forward transfer admittance Static drain to source on state resistance RDS(on) Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate to source charge Gate to drain charge Turn-on delay time Rise time Turn-off delay time Fall time Body-drain diode forward voltage tf VDF Body-drain diode reverse recovery time Note: Symbol V(BR)DSS V(BR)GSS IDSS IGSS VGS(off) |yfs| RDS(on) trr 4. Pulse test REJ03G1603-0100 Page 2 of 6 Rev.1.00 Nov 21, 2007 Min –60 ±20 — — –1.0 60 — — — — — — — — — — — Typ — — — — — 100 8.2 10 8800 950 600 150 25 23 25 30 290 Max — — –10 ±10 –2.5 — 11 15 — — — — — — — — — Unit V V µA µA V S mΩ mΩ pF pF pF nC nC nC ns ns ns — — — 135 –0.96 45 — — — ns V ns Test Conditions ID = –10 mA, VGS = 0 IG = ±100 µA, VDS = 0 VDS = –60 V, VGS = 0 VGS = ±16 V, VDS = 0 VDS = –10 V, ID = –1 mANote4 ID = –45 A, VDS = –10 VNote4 ID = –45 A, VGS= –10 VNote4 ID = –45 A, VGS = –4.5 VNote4 VDS = –10 V, VGS = 0 f = 1 MHz VDD = –25 V, VGS = –10 V, ID = –90 A VGS = –10 V, ID= –45 A, VDD = –30V RG = 4.7 Ω IF = –90 A, VGS = 0 IF = –90 A, VGS = 0, diF/dt = 100 A/µs RJJ0601JPE Main Characteristics Maximum Safe Operation Area 80 −100 s t) s) ho 0 1s ≤1 s( m W (P n tio ra 25 50 75 100 Case Temperature −1 Operation in this area is limited by RDS (on) −0.1 125 −0.01 −0.1 150 Tc (°C) −1000 −4.5 V −10 V −10 −3.0 V −50 VGS = −2.7 V −100 VDS = −10 V Pulse Test −10 −1 −0.1 Tc = 150°C −0.01 25°C −40°C −0.001 Pulse Test −5 0 −100 Typical Transfer Characteristics Drain Current ID (A) −100 −1 Drain to Source Voltage VDS (V) Typical Output Characteristics Drain Current ID (A) m −10 Ta = 25°C 1 shot Pulse 0 −10 −0.0001 0 −1 −2 −3 −4 −5 Drain to Source Voltage VDS (V) Gate to Source Voltage VGS (V) Static Drain to Source on State Resistance vs. Drain Current Static Drain to Source on State Resistance vs. Temperature 100 25 Drain to Source on State Resistance RDS (on) (mΩ) Drain to Source on State Resistance RDS (on) (mΩ) µs 10 20 0 e Op 40 10 = 60 10 µs PW Drain Current ID (A) −1000 DC Channel Dissipation 100 1 Pch (W) Power vs. Temperature Derating Pulse Test 10 VGS = −4.5 V −10 V 1 −1 −10 −100 Drain Current ID (A) REJ03G1603-0100 Page 3 of 6 Rev.1.00 Nov 21, 2007 −1000 ID = −45 A 20 15 VGS = −4.5 V 10 5 −10 V Pulse Test 0 −50 −25 0 25 50 75 100 125 150 Case Temperature Tc (°C) RJJ0601JPE Typical Capacitance vs. Drain to Source Voltage Drain to Source Voltage VDS (V) 100000 Capacitance C (pF) VGS = 0 f = 1 MHz Ciss 10000 1000 Coss Crss 100 −0 −10 −20 −30 −50 –4 –10 –8 –12 –20 VDD = –25 V –10 V –5 V VDS VGS –30 ID = –90 A –16 0 50 100 –40 200 150 Reverse Drain Current vs. Source to Drain Voltage Maximum Avalanche Energy vs. Channel Temperature Derating Repetitive Avalanche Energy EAR (mJ) Gate Charge Qg (nC) Pulse Test –10 V –50 VGS = 0 V 0 0 VDD = –5 V –10 V –25 V Drain to Source Voltage VDS (V) –100 Reverse Drain Current IDR (A) −40 0 –0.4 –0.8 –1.2 –1.6 –2.0 250 L = 100 µH VDD = –25 V duty < 0.1 % Rg ≥ 50 Ω 200 150 100 50 0 25 50 75 100 125 150 Source to Drain Voltage VSD (V) Channel Temperature Tch (°C) Avalanche Test Circuit Avalanche Waveform VDS Monitor L EAR = 1 2 L • IAP2 • VDSS VDSS – VDD IAP Monitor Rg V(BR)DSS D. U. T VDD IAP VDS Vin –15 V 50 Ω ID 0 REJ03G1603-0100 Page 4 of 6 Rev.1.00 Nov 21, 2007 VDD Gate to Source Voltage VGS (V) Dynamic Input Characteristics Normalized Transient Thermal Impedance γs (t) RJJ0601JPE Normalized Transient Thermal Impedance vs. Pulse Width 10 1 D=1 0.5 0.2 0.1 0.1 0.05 θch - c(t) = γs (t) x θch - c θch - c = 1.39°C/W, Tc = 25°C 0.02 0.01 0.01 PDM D= lse t ho PW T PW pu T 1s 0.001 0.01 0.1 1 10 100 1000 Pulse Width PW (mS) Switching Time Test Circuit Vout Monitor Vin Monitor Switching Time Waveform Vin 10% D.U.T. Rg RL VDD = –30 V Vin –10 V REJ03G1603-0100 Page 5 of 6 90% Rev.1.00 Nov 21, 2007 90% 90% Vout 10% td(on) tr 10% td(off) tf RJJ0601JPE Package Dimensions JEITA Package Code SC-83 RENESAS Code PRSS0004AE-B Previous Code LDPAK(S)-(1) / LDPAK(S)-(1)V MASS[Typ.] 1.30g 7.8 6.6 10.0 2.49 ± 0.2 0.2 0.1 +– 0.1 7.8 7.0 + 0.3 – 0.5 1.3 ± 0.15 (1.5) (1.5) 8.6 ± 0.3 (1.4) 4.44 ± 0.2 10.2 ± 0.3 Unit: mm 1.7 Package Name LDPAK(S)-(1) 2.2 1.37 ± 0.2 0.2 0.86 +– 0.1 2.54 ± 0.5 2.54 ± 0.5 0.4 ± 0.1 0.3 3.0 +– 0.5 1.3 ± 0.2 Ordering Information Part No. RJJ0601JPE-00-Q3 RJJ0601JPE-00-J3 REJ03G1603-0100 Page 6 of 6 Quantity 1000 pcs 1000 pcs Rev.1.00 Nov 21, 2007 Shipping Container Taping (Dextrorse) Taping (Sinistrorse) Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2007. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2