DESCRIPTION N REVISED PER ER7306 BY APPD DATE CWB REV CWB 04/14/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL SPECIFICATIONS: BODY: BRASS PER ASTM B16 RETAINING RING: COPPER ALLOY 2. FINISH SPECIFICATIONS: BODY: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQN-290 (RoHS) RETAINING RING: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (RoHS) .290 7.37 ISOMETRIC VIEW SCALE: 4:1 .020 .51 .250 6.35 .218 5.54 .068 1.73 TYP 4X .078 1.98 .228 5.79 TYP CATALOG P/N: 01127 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 8:1 WinchesterElectronics Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING RECOMMENDED PAD LAYOUT DRAWN EJW APPROVED XXX DATE APPROVED 06/10/99 JD DATE APPROVED XX/XX/XX XXX DATE 06/10/99 DATE XX/XX/XX POWER SNAP SURFACE MOUNT 40 AMPS A SD01127 SHT 1 OF 1 REV N