DESCRIPTION C REVISED PER ER7306 2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16. BY APPD DATE CWB REV CWB 04/14/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000. 3. FINISH SPECIFICATIONS: BODY: .000030 MIN GOLD PER ASTM B488 OVER .000050 MIN NICKEL PER AMS-QQ-N-290 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 30 AMP 5. FOR USE WITH 10 GA. OR EQUIVALENT WIRE. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. .353 8.97 +.010 +.25 .00 .218 - .000 5.54 .186 4.72 ACROSS FLATS .167 4.24 .144±.001 3.66±.03 .275 6.99 .146±.003 3.71±.08 .271 6.88 CATALOG P/N: 01361 RECOMMENDED CABLE TRIM DIMENSIONS SCALE: 2:1 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] ANGLES: ± 2° SCALE: 4:1 WinchesterElectronics Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING DRAWN JEM APPROVED JED DATE APPROVED 10/15/03 CWB DATE APPROVED 10/15/03 SD DATE 10/15/03 DATE 10/15/03 POWER SNAP RIGHT ANGLE SOLDER MOUNT 10 AWG, 30 AMP A SD01361 SHT 1 OF 1 REV C