2065 Series Product Beneļ¬ts BNC Connectors Full crimp design Designed for analog & digital cables Field Installable Meets or exceeds HDTV standards Mechanical Durability: Center Contact Retention: Coupling Mechanism: Force to Engage/Disengage: Interface Dimension: Electrical 500 Cycles Min Center Contact 6 lbs. Minimum 100 lbs. Minimum Torque 2.5 in-lbs. Max.; Longitudinal force 3.0 lbs. Max. MIL-C-39012 except 75 Ohms Contact Resistance: Environmental Thermal Shock: Moisture Resistance: Corrosion (Salt Spray): Flammability: Vibration: Solvent Resistance: Characteristic Impedance: Voltage Rating: Return Loss: -65°C to +165°C 0 to 95%: MIL-STD-202 Method 106 MIL-STD-202 Method 101 Test Condition B UL 94-VO Rated (Center Conductor Insulator) MIL-STD-202 Method 204 Test Condition B MIL-STD-202 Method 215 Insulation Resistance: 75 Ohms 500 Volts RMS Less than -36 dB to 1 GHz; -25 dB to 2 GHz; -23 dB to 3 GHz; -20 dB to 5 GHz Center Contact .0014 Ohms Outer Contact .002 Ohms 5000 megohms Finishes Body/Bayonet: Center Conductor: Nickel 50 millionths inch gold plating over copper plate Typical Return Loss Outline Drawing (Plug) CO N N E CT I N G I N N O VAT I O N TO A P P L I CAT I O N ® Plugs FOR CABLES* KINGS® Part No. Belden 2065-1-9 9209A CABLING West Penn/ CDT Gepco 2065-2-9 1505A 1506A 9259 819 25819 815 VPM2000 VPM2000TS VE61859M 2065-15-9 8281 P806 VP618PE VP6000 VP618TK 2065-7-9 8241 VJ59U 2065-8-9 7731A 8213 2065-10-9 1694A 1695A 2065-11-9 1855A 1865A 2065-29-9 1279R 1279P 2065-28-9 1520A 179DT Crimp Die Others Crimp Die Trim Code Bulk Packs Available? (KTH-1000) (KTH5000) KTH-2261 KTH-5003 3-661-1 KTH-2261 KTH-5003 3-661-1 WE 724 KTH-2119 KTH-5002 3-661-4 RG-59 RG-210 KTH-2261 KTH-5003 3-661-1 VHD1100 KTH-2004 KTH-5004 3-661-3 6350 256350 WP6355 VSD2001 VSD2001TS KTH-2325 KTH-5017 3-661-1 YES HD825 HD25825 WP8255 WP258255 VDM230 VDM250 KTH-2025 KTH-5003 3-661-1 YES KTH-2276 KTH-5001 3-661-1 YES KTH-2258 KTH-5001 3-661-1 YES RG-179 RG-187 YES YES Trim Code A B C 3-661-1 .624 .312 .155 3-661-3 .687 .375 .187 3-661-4 .668 .356 .200 *Consult factory for cables not listed Within Series Adapters Dimensions KINGS® Part Number Adapter Ends A ln B mm ln mm 2029-9-9 Bulkhead, Jack-Jack 1.28 32.5 0.69 D 17.5 D 2029-15-9 Jack-Jack 1.28 32.5 0.44 D 11.2 D 2029-16-9 Jack-Plug-Jack 1.28 32.5 1.06 26.9 2029-17-9 Bulkhead, Jack-Jack, iso. ground 1.28 32.5 0.63 D 16.0 D 2029-20-9 Jack-Plug, Right Angle 0.90 22.9 1.03 26.2 Mounting Hole A A Terminations KINGS® Part Number (True 75 Ohm) 2555-3-32 Dimensions A ln 1.00 B mm 25.4 ln 0.57 D Notes mm 14.5 D 75 ohm, 0.1%, 1/2 watt Note: Connectors are designed for use on both analog and digital cable. Consult your cable manufacturer for cable performance data. Winchester Electronics 199 Park Road Extension - Suite 104 Middlebury, Connecticut 06762 203.741.5400 Phone 203.741.5500 Fax www.winchesterelectronics.com September 30, 2013