Winchester Electronics Introduces... 3325 Series Miniature BNC Product Benefits: Mini BNC plugs are 20% smaller than standard BNC plugs. Excellent choice for high density applications requiring a miniaturized quick connect / disconnect BNC coupling mechanism True 75 Ohm - Compliant to SMPTE 424M (3G-SDI) Specification Reliable Crimp / Crimp cable termination using existing KTH-1000 and KTH-5000 Die Sets Durable screw machined bodies and components built to withstand rough handling in Telco and Broadcast applications Plug Specifications Electrical Environmental 75 Ohms DC to 6.0 GHz 500 Volts RMS Up to 1.5 GHz, < -20 dB Up to 3.0 GHz, < -15 dB Up to 6.0 GHz, < -10 dB Center Contact .0014 Ohms Outer Contact .002 Ohms 5000 megohms Impedance Frequency Range Voltage Rating Return Loss (Mated Pair) Contact Resistance Insulation Resistance Corrosion (Salt Spray) Flammability Vibration Solvent Resistance MINI-BNC 75 OHM PLUGS FOR LOW-LOSS DIGITAL CABLES (BELDEN OR EQUIVALENT) RETURN LOSS (dB) VS. FREQUENCY (GHz) Mechanical 0 Durability Center Contact Retention Coupling Mechanism Force to Engage/Disengage SMPTE 424M (3G-SDI) -10 S11 (dB) -20 -30 1855A Coupling Nut/Body Contact Crimp Sleeve 1694A -50 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 500 Cycles Minimum 6 lbs. Minimum 100 lbs. Minimum Torque 2.5 in-lbs. Maximum; Longitudinal force 3.0 lbs. Max. Finishes 1505A -40 -60 -65°C to +165°C 0 to 95%: MIL-STD-202 Method 106 MIL-STD-202 Method 101 Test Condition B UL 94-VO Rated (Center Conductor Insulator) MIL-STD-202 Method 204 Test Condition B MIL-STD-202 Method 215 Thermal Shock Moisture Resistance .000100 Minimum Nickel .000030 Min. Gold over Nickel .000050 Minimum Nickel 6 FREQUENCY (GHz) H D TM July 2011 www.winchesterelectronics.com Plugs Crimp Tooling KINGS® Part Number Cables Crimp Die (KTH-1000) 3325-E00-07701N 735A KTH-2185 3325-E00-C9001N Belden 1694A Gepco VSD2001 KTH-2325 3325-E00-C7101N Belden 1505A Gepco VPM2000 3325-E00-C7201N Crimp Die (KTH-5000) Hex Size Packaging .041/.178 Single KTH-5017 .046/.278 Single KTH-2261 KTH-5003 .041/.255 Single Belden 1855A Gepco VDM230 KTH-2025 KTH-5003 .041/.178 Single 3325-E00-C7701N Belden 179DT KTH-2258 .041/.188/.128 Single 3325-E00-V3601N Belden 1855ENH KTH-2025 .041/.178 Single Extraction Tool Available - Part #KTH-2345 Future Offerings In Development Printed Circuit Board (PCB) Jacks Figure 1 Figure 2 Figure 3 Figure 4 KINGS® Part Number Description Figure 3327-099-00401G Edgemount Bulkhead Jack 1 3327-099-00402G Vertical PCB Jack, 3 Ground Pin 2 332B-060-00401G Right-angle PCB Jack 3 332B-099-00401N Right-angle, Stacking 2-Pos. PCB Jack 4 Connecting Innovation to Application® 62 Barnes Industrial Road North Wallingford, CT 06492 Phone: (203) 741-5400 • Fax: (203) 741-5500