DC/DC Converters THL 6WI Series, 6 Watt CB Features ◆ Compact DIP package ◆ Ultra wide 4:1 input voltage range ◆ Fully regulated outputs ◆ I/O isolation 1500 VDC ◆ Operating temp. range –40°C to +75°C ◆ Short circuit protection ◆ Input filter to meet EN 55022, class A ◆ 3-year product warranty 226037 Scheme IEC 60950-1 The THL 6WI series is a family of compact 6 W dc/dc-converters with 4:1 input voltage ranges. The internal filter which meets EN55022 Class A without external components makes the converter easy to design in. They come with remote On/Off and short circuit protection. THL 6WI converter is an excellent solution for data- and telecom applications and for instrumentation and Industrial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THL6-2410WI 3.3 VDC 1450 mA 76 % THL6-2411WI 5.0 VDC 1200 mA 79 % THL6-2412WI 12 VDC 500 mA 83 % THL6-2413WI 9 – 36 VDC 15 VDC 400 mA 83 % THL6-2415WI (nominal 24 VDC) 24 VDC 250 mA 83 % THL6-2421WI ±5 VDC ±600 mA 82 % THL6-2422WI ±12 VDC ±250 mA 83 % THL6-2423WI ±15 VDC ±200 mA 83 % THL6-4810WI 3.3 VDC 1450 mA 76 % THL6-4811WI 5.0 VDC 1200 mA 79 % THL6-4812WI 12 VDC 500 mA 83 % THL6-4813WI 18 – 75 VDC 15 VDC 400 mA 83 % THL6-4815WI (nominal 48 VDC) 24 VDC 250 mA 83 % THL6-4821WI ±5 VDC ±600 mA 82 % THL6-4822WI ±12 VDC ±250 mA 83 % THL6-4823WI ±15 VDC ±200 mA 83 % http://www.tracopower.com Page 1 of 3 DC/DC Converters THL 6WI Series 6 Watt Input Specifications Input current at no load (nominal input voltage) Input current at full load (nominal input voltage) 24 48 Surge voltage (100 msec. max.) 24 Vin models: 30 mA typ. 48 Vin models: 20 mA typ. Vin; 3.3 VDC model: 24 Vin other models: Vin; 3.3 VDC model: 48 Vin other models: 260 mA typ. 300 mA typ. 130 mA typ. 150 mA typ. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 level A, FCC part 15, level A without external components Recommended input fuse (slow blow) 24 V models: 1500 mA 48 V models: 750 mA Output Specifications Voltage set accuracy ±2 % max Regulation – Input variation Vin min. to Vin max. 1.0 % max. – Load variation 15 – 100 % 1.2 % max. Minimum load 15 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz bandwidth) 100 mVp-p max. Transient response setting time (25 % load step change) 300 µs typ. Short circuit protection indefinite Maximum capacitive load 3.3 & 5 VDC models: 330 µF 12, 15 & 24 VDC models: 100 µF ±5,±12 & ±15 VDC models: 100 µF (each output) General Specifications Temperature Load derating – Operating –40°C to +75°C – Storage –40°C to +125°C – Case +105°C max. 3 %/K above 60°C Humidity (non condensing) 95 % Reliability, calculated MTTF (MIL-HDBK-217F, at +25°C, ground benign) >350‘000 h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 1500 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm Safety standard (designed to meet) IEC 60950-1, UL 60950-1 Safety approvals – CB test certificate according IEC 60950-1 www.tracopower.com/products/thl6wi-cb.pdf – CSA certificate fo UL/cUL 60950-1 www.tracopower.com/products/thl6wi-csa.pdf Switching frequency 330 kHz Altitude during operation 5‘000 m max. (16‘400 ft) approved Remote On/Off Environmental compliance – On: 2.5 to 50 VDC or open circuit – Off: –0.7 to +0.8 VDC – Off stand by input current 10 mA max. g din – Reach www.tracopower.com/products/thl6wi-reach.pdf pen – RoHS RoHS directive 2002/95/EC All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters THL 6WI Series 6 Watt Pysical Specifications Casing material non-conductive plastic (UL94V-0 rated) Package weight 9.1 g (0.32 oz) Environmental compliance – Reach regulation EC 1907/2006 – RoHS directive 2002/95/EC Soldering temperature (1.5mm from case for 10 sec.) max. 260°C 10.16 (0.40) bottom view 6 9 8 4.1 0.5 (0.02) 2.54 15.24 (0.6) (0.1) (0.16) 10.2 (0.4) 20.3 (0.8) 1.9 5.08 11 (0.20) 21.6 (0.87) 2 2.54 1 (0..07) 16 (0.10) Outline Dimensions Pin-Out Pin Single Dual 1 Remote On/Off Remote On/Off 2 –Vin –Vin 6 ntc. Common 8 ntc. –Vout 9 +Vout +Vout 11 –Vout Common 16 +Vin (Vcc) +Vin (Vcc) ntc. = not to connect Dimensions in [mm], () = Inch Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.25 (±0.01) Pin pich tolerances ±0.13 (±0.0005) Specifications can be changed any time without notice. Rev. 06/12.1 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page 3 of 3