RB160VA-40 Diodes Schottky barrier diode RB160VA-40 z Land size figure (Unit : mm) z Dimensions (Unit : mm) zApplications General rectification 1.1 0.17±0.1 0.05 1.9±0.1 2.5±0.2 zFeatures 1) Small mold type. (TUMD2) 2) Low VF, Low IR. 3) High reliability. 0.8 0.5 2.0 1.3±0.05 TUMD2 zStructure zConstruction Silicon epitaxial planar 0.8±0.05 0.6±0.2 ROHM : TUMD2 0.1 dot (year week factory) + day z Taping specifications (Unit : mm) 0.25±0.05 8.0±0.2 2.75 1.43±0.05 4.0±0.1 2.8±0.05 1.75±0.1 φ1.55±0.1 0 2.0±0.05 3.5±0.05 4.0±0.1 φ1.0±0.2 0 0.9±0.08 zAbsolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive) Reverse voltage (DC) Average rectified forward current Forward current surge peak （60Hz・1cyc） Forward current surge peak（t=100µs・1cyc） Junction temperature Storage temperature Symbol VRM VR Io IFSM IFSM Tj Tstg Limits 40 40 1 5 10 150 -40 to +150 Unit V V A A A ℃ ℃ zElectrical characteristics (Ta=25°C) Parameter Forward voltage Reverse current Symbol VF Min. Typ. Max. Unit - 0.50 0.55 V IR - 1.5 50 µA Conditions IF=700mA VR=40V Rev.D 1/3 RB160VA-40 Diodes zElectrical characteristic curves (Ta=25°C) 100000 1 Ta=75℃ Ta=25℃ 0.01 Ta=-25℃ 10 Ta=25℃ 1 Ta=-25℃ 0.1 100 200 300 400 500 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 600 1 0 10 20 30 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 500 490 AVE:501.9mV 20 15 10 AVE:1.5772uA 5 VF DISPERSION MAP 160 150 140 130 120 110 AVE:121.1pF Ct DISPERSION MAP 30 20 8.3ms 10 5 AVE:15.6A 0 Ifsm 15 PEAK SURGE FORWARD CURRENT:IFSM(A) PEAK SURGE FORWARD CURRENT:IFSM(A) 1cyc Ifsm 8.3ms 8.3ms 1cyc 10 5 0 25 Ifsm 15 10 5 10 1 100 IFSM DISPERSION MAP 1 IF=0.2A 10 100 TIME:t(ms) IFSM-t CHARACTERISTICS NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS Mounted on epoxy board t 20 0 1 IM=10mA 170 IR DISPERSION MAP 20 15 180 100 0 480 30 Ta=25℃ f=1MHz VR=0V n=10pcs 190 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 510 10 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 200 Ta=25℃ VR=40V n=30pcs 25 REVERSE CURRENT:IR(uA) 520 1000 0 40 30 Ta=25℃ VF=0.7A n=30pcs 10 0.01 530 0.3 0.9 D=1/2 time Rth(j-a) 300us 100 Rth(j-c) FORWARD POWER DISSIPATION:Pf(W) 0.8 1ms 0.7 REVERSE POWER DISSIPATION:PR (W) FORWARD VOLTAGE:VF(mV) 100 Ta=75℃ 100 0.001 0 PEAK SURGE FORWARD CURRENT:IFSM(A) f=1MHz 1000 0.001 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) 1000 Ta=125℃ CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=125℃ 0.1 Ta=150℃ 10000 REVERSE CURRENT:IR(uA) FORWARD CURRENT:IF(mA) Ta=150℃ Sin(θ＝180) 0.6 DC 0.5 0.4 0.3 0.2 Sin(θ＝180) D=1/2 0.1 DC 0.2 0.1 10 0.001 0.1 10 TIME:t(s) Rth-t CHARACTERISTICS 1000 0 0 0 0.5 1 1.5 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 2 0 10 20 30 40 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS Rev.D 2/3 RB160VA-40 Diodes 2 D=1/2 1.5 0A 0V DC DC Io t T VR D=t/T VR=20V Tj=150℃ 1 0.5 Sin(θ＝180) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 2 Sin(θ＝180) 1.5 D=1/2 1 Io 0A 0V 0.5 t T VR D=t/T VR=20V Tj=125℃ 0 0 0 25 50 75 100 125 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) 150 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) Rev.D 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0