TRACO POWER or Convertec Power Electronics

Sl~
Siovenski institut za
kakovost in meroslovje
Siovenian Institute of
Quality and Metrology
Number
SI-SIQ BG 007/027
Product alld type(\) / mode/(s)
Power Supply
Model: TEX 120-112 or IPEX 012.080 and TEX 120-124 or IPEX 024.050
Trade mark
TRACO POWER or Convertec Power Electronics
Applicant/ Licensee
Convertec Ltd., Whitemill Industrial Estate, Wexford, Republic of Ireland
1¥/llnufac1urer
Convertec Ltd., Whitemill Industrial Estate, Wexford, Republic of Ireland
Reference to the European standards
EN 61010-1:2010
Test Rep011- No. and date (1 iHue
T223-0286/13, 2013-07-12
This licence is based on the licence agreement No. SIQ BG 007 signed on 2011-06-02. The SIQ Type Approved
certification mark of conformity may be applied to the product(s) as specified in this document for the duration of the
SIQ licence agreement.
Only the integral publication of this licence (together with the Annex) is allowed.
Certification mark ofcOllfomtity
SIQ hereby grants the right to use the SIQ Type Approved certification mark on the products specified in
the Annex to this document. The SIQ Type Approved certification matk signifies the compliance of
the products with requirements of cited standard(s).
Sl£~
Type Approved
---- -_._--.--- .. _..
... ..,-----._.. __.-._ .._-_.Bauart Gepruft
-----
Ljubljana,
,-~----_
'_
2013-07-12
Slovenian Institute of Quality and Metrology, TrZaSkacesta2, SI-lOOO Ljubljana, Slovenia
tel.: +386 1 4778 100, fax: +386 14778444, e-mail: [email protected]
Sl~
SI-SIQ BG 007/027
St. / No.
1 (2)
Stran / Page
ANNEX to the Licence for the use of SIQ Type Approved certification mark
No. SI-SIQ BG 007/027
1. Specification of the certified product
product:
Power Supply
trade mark:
TRACO POWER or Convertec Power Electronics
model:
TRACOPOWER
Convertec Power Electronics
Manufacturer
Model reference
Model reference
Model reference
TEX 120-112
IPEX 012.080
120WPP182
TEX 120-124
IPEX 024.050
120WPP184
2. Technical data
Ratings:
TEX 120-112:
Input: 100-240 Vac; 50/60Hz; 2,2-1,0 A
Output: 12 Vdc; 8 A
TEX 120-124:
Input: 100- 240 Vac; 50/60Hz; 2,4-1,2 A
Output: 24 Vdc; 5 A
Operational Input Voltage:
85-264 Vac /85-375 Vdc
3. Information regarding test results and product documentation
test reports:
T223-0286/13, 2013-07-12
product documentation:
C20130906
4. Factory locations
The products are manufactured by Convertec Limited, Wexford, Ireland or it's subcontractors as
disclosed in document »Factory locations SI-SIQ BG 007/027«.
5. Limitation
/
Sl~
SI-SIQ BG 007/027
St. / No.
6. List of components
The list of critical components forms part of the test report listed Above.
7. Conclusion
The examination proved that all test requirements were met.
Tested by:
~~
~,.
2 (2)
Stran / Page
Branko Lamovsek
~ Gregor Schoss
Checked bY~r