Sl~ Siovenski institut za kakovost in meroslovje Siovenian Institute of Quality and Metrology SUlII b,'/ SI-SIQ BG 007/018 - - - - - - - - - - - - .-- ~- - - Power Supply for building-in (DIN RAIL) Model: TCL-DC or INMI-DC (Refer to Annex) TRACOPOWER or Convertec Power Electronics ·Ipplimllt I.jolllsee Convertec Ltd., Whitemill Industrial Estate, Whitemill Road, Wexford 1 Irleand ,\fIIIlU/'i(turl'!' Convertec Ltd., Whitemill Industrial Estate, Whitemill Road, Wexford 1 Irleand EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011 T, ~. Report - .Yo. alld dat,- oti.\Slie T223-0411/11, 2011-12-08 This licence is based on the licence agreement No. SIQ BG 007 and general service contract with SIQ valid at the date ofthis certificate. The SIQ Type Approved certification mark of conformity may be applied to the product(s) as specified in this document for the duration ofthe SIQ licence agreement based on regular surveillance ofproduct and production processes. Only the integral publication ofthis licence (together with the Annex) is allowed. ('O't{lii atiofl lIIark ,~r cOllformity SIQ hereby grants the right to use the SIQ Type Approved certification mark on the products specified in the Annex to this document. Compliance with requirements ofstandard(s) cited give a presumption of conformity with the essential requirements ofthe Low Voltage Directive 20061951EC. Sl£:~ Type Approved Bauart GeprOft I)uMjllllfl. 2011-12-13 . lutlu1""-' el '1.11 i(lIre Alja Pregl Slovenian Institute of Quality and Metrology, Tr~ska cesta 2, SI-1000 Ljubljana, Slovenia tel.: +3861 4778 100, fax: +386 14778444, e-mail: [email protected] SI-SIQ BG 007/018 1 (3) Št. / No. Stran / Page ANNEX to the Licence for the use of SIQ Type Approved certification mark No. SI-SIQ BG 007/018 1. Specification of the certified product product: Power Supply for building-in (DIN-RAIL) trade mark: TRACOPOWER or Convertec Power Electronics. Model: TN4004 Izdaja/Issue: 01_01_06_2009 TRACOPOWER Convertec Power Electronics Manufacturers Model reference Model reference Model reference TCL12-124DC INMI 024.010DC012 020PSM124 TCL24-105DC INMI 005.050DC024 020PSM161 TCL24-112DC INMI 012.020DC024 020PSM162 TCL24-124DC INMI 024.010DC024 020PSM164 TCL060-112DC INMI 012.050DC024 050PSM162 TCL060-124DC INMI 024.025DC024 050PSM164 TCL-REM240 PARA INMI 024 240PAR144 SI-SIQ BG 007/018 2 (3) Št. / No. Stran / Page 2. Technical data Model Input Output Voltage [Vdc] Current [A] Voltage [DC] Current [A] Power [W] TCL12-124DC 9,5 - 18 -- 24 1,0 24 TCL24-105DC 18 - 75 -- 5 5,0 25 TCL24-112DC 18 - 75 -- 12 2,0 24 TCL24-124DC 18 - 75 -- 24 1,0 24 TCL060-112DC 18 - 75 4,0 - 1,0 12 5,0 60 TCL060-124DC 18 - 75 4,0 - 1,0 24 2,5 60 TCL-REM240 Vin1: 5-48Vdc Vin2: 5-48Vdc -- Vin – 0,9Vdc 8 -- TN4004 Izdaja/Issue: 01_01_06_2009 Sl~ SI-SIQ BG 007/018 St. INa. 3 (3) Stranl Page 3. Information regarding test results and product documentation test report: T223-0411/11, dated 2011-12-08 product documentation: C20111783 4. Factory locations The products are manufactured by Convertec Limited, Wexford, Ireland or it's subcontractors as disclosed in document »Factory locations SI-SIQ BG 007/018«. 5. Limitation/Comments: / 6. List of components The list of critical components fOnTIS part of the test report listed above. 7. Conclusion A representative test sample(s) of the above listed model(s) has passed the tests in full compliance in accordance to the standards EN 60950-1 :2006 + Am 1:2010 + Am 11 :2009 + Am 12:2011 and IEC 60950-1 :2005 (2nd edition) as verified in the test report. Tested by: Checked /Q---::t bYjet.r TN4004 Izdaja, Iss/le: 0 I _01_06j009 Branko Lamovsek Gregor Schoss