Issue Date: 2008-07-31 Page 1 of 8 Report Reference # E300305-A32-UL 2012-12-17 UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60950-1, 2nd Edition, 2011-12-19 (Information Technology Equipment - Safety - Part 1: General Requirements) CSA C22.2 No. 60950-1-07, 2nd Edition, 2011-12 (Information Technology Equipment - Safety - Part 1: General Requirements) Listing QQGQ, QQGQ7 (Power Supplies for Information Technology Equipment Including Electrical Business Equipment) Switching Power Supply Models CENB1100********, MENB1100********, and JMW1100********* and JPW1100********* (Where * may be alphanumeric, "for marketing purpose and no impact safety related critical components and constructions") Input Rating: 100-240 Vac, 50-60 Hz, 2.0 A Output Rating: 12.0 Vdc, 7.5 A or 13.0 Vdc, 6.92A or 15.0 Vdc, 6.4 A or 16.0Vdc, 6.0 A or 18.0 Vdc, 5.6 A or 19.0 Vdc, 5.2 A or 24.0 Vdc, 4.2 A or 48.0 Vdc, 2.1A Product: Model: Rating: Applicant Name and Address: BRIDGEPOWER CORP 964 GOSAEK-DONG GWONSEON-GU SUWON-SI GYEONGGI-DO 441-813 KOREA This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the FollowUp Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure. The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. Prepared by: InYoung Hwang Reviewed by: Frederick Won Copyright © 2012 Issue Date: 2008-07-31 Page 2 of 8 Report Reference # E300305-A32-UL 2012-12-17 Supporting Documentation The following documents located at the beginning of this Procedure supplement the requirements of this Test Report: A. Authorization - The Authorization page may include additional Factory Identification Code markings. B. Generic Inspection Instructions i. Part AC details important information which may be applicable to products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of this Test Report. ii. Part AE details any requirements which may be applicable to all products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of each Test Report. iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical standard used to investigate these products. Products are permitted to bear only the Certification Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report. Product Description Switching Mode Power Supply(AC/DC adapter), consists of electronic components mounted on PWB, a switching transformer and electronic components mounted on PWB, housed with a plastic enclosure. Model Differences Models CENB1100********, MENB1100********, and JMW1100********* and JPW1100********* (Where * may be alphanumeric, "for marketing purpose and no impact safety related critical components and constructions") Models CENB1100********, MENB1100********, and JMW1100********* are identical to JPW1100*********, except model designations as follows; Nomenclature JPW1100 * * ** ** * ** (a) (b) (c) (d) (f) (e) or JMW1100 * * ** ** * ** (a) (b) (c) (d) (f) (e) or CENB1100 * ** ** * ** (b) (c) (d) (f) (e) or MENB1100 * ** ** * ** (b) (c) (d) (f) (e) (a) means custom options, may be A to Z; (b) means design revision changes, may be A to Z; (c) means output voltages, may be 12, 13, 15, 16, 18,19, 24 or 48; (d) means standards output cord options, may be 00 to 99; (e) means custom options, may be 00 to 99 or AA to ZZ. (f) means class type, maybe F(ClassI) or Q (ClassII) or N(ClassII) The marked models as 12, 13, 15, 16, 18, 19 , 24 and 48 on (c) nomenclature are identical individually, except model designations, output ratings, transformers and secondary circuits. The Models JPW1100**13*****, JPW1100**16*****, CENB1100*13*****,CENB1100*16*****, JMW1100**13*****, JMW1100**16*****, MENB1100*13*****, and MENB1100*16***** are identical to Model JPW1100**12***** except for model designation, output ratings, transformers and secondary circuits. Issue Date: 2008-07-31 Page 3 of 8 Report Reference # E300305-A32-UL 2012-12-17 The model JPW1100**19*****, CENB1100*19*****, JMW1100**19*****, MENB1100*19***** are identical to JPW1100**12***** except for model designation, output ratings, transformers and secondary circuits. Technical Considerations Equipment mobility : movable Connection to the mains : pluggable A Operating condition : continuous Access location : operator accessible Over voltage category (OVC) : OVC II Mains supply tolerance (%) or absolute mains supply values : +10%, -10% Tested for IT power systems : No IT testing, phase-phase voltage (V) : N/A Class of equipment : Class I (earthed) or ClassII Considered current rating of protective device as part of the building installation (A) : 20A Pollution degree (PD) : PD 2 IP protection class : IP X0 Altitude of operation (m) : Up to 2000m Altitude of test laboratory (m) : Up to 2000m Mass of equipment (kg) : 0.7 The product was submitted and evaluated for use at the maximum ambient temperature (Tma) permitted by the manufacturer’s specification of: 35 The means of connection to the mains supply is: Pluggable A, Detachable power cord, The product is intended for use on the following power systems: TN The equipment disconnect device is considered to be: Appliance inlet Additional Information Max. Normal Load Condition: Rated output currents JPW1100KA1200F01: 12.0 Vdc, 7.5 A; JPW1100KA1500F01: 15.0 Vdc, 6.4 A; JPW1100KA1800F01: 18.0 Vdc, 5.6 A; JPW1100KA2400F01: 24.0 Vdc, 4.2 A. Amendment 1, 09CA08733 - Applicant change to BRIDGEPOWER CORP. - Correction of Nomenclature. - Manufacturer change of Line filter(LF1, LP1, LP2, LP4, LP5), PFC Coil and Transformer(T1) to BRIDGEPOWER CORP in the appended table 1.5.1. 11CA13092 - Upgrade report from UL 60950-1 1st edition to UL 60950-1 2nd edition 11CA15704 - Add model name ; JPW1100**13**F**, JPW1100**16**F**,JMW1100**13**F**,JMW1100**16**F**, CENB1100*13**F**, CENB1100*16**F**,MENB1100*13**F**, MENB1100*16**F** - Alternate transformer ; typed JEC(B) , Part No.: 3025579001A for 12V, 13V output; Part No.: 3025579002A for 15V, 16V output) Issue Date: 2008-07-31 Page 4 of 8 Report Reference # E300305-A32-UL 2012-12-17 - "Output Rating:13.0 Vdc, 6.92A or 16.0Vdc, 6.0 A " is added due to alternate transformer. 11CA37966 1) Alternate transformer for model JPW1100**18**F**, JPW1100**24**F**, CENB1100*18**F**, CENB1100*24**F**, JMW1100**18**F**, JMW1100**24**F** 2) Add model name ; JPW1100**19**F**, CENB1100*19**F**, JMW1100**19**F**, MENB1100*19**F** , output rating 19.0 Vdc, 5.2A 3)Correct model name in critical component list - from CENB1100B12**F** to CENB1100A12**F** - from CENB1100B13**F** to CENB1100A13**F** - from CENB1100B15**F** to CENB1100A15**F** - from CENB1100B16**F** to CENB1100A16**F** - from MENB1100B12**F** to MENB1100A12**F** - from MENB1100B13**F** to MENB1100A13**F** - from MENB1100B15**F** to MENB1100A15**F** - from MENB1100B16**F** to MENB1100A16**F** 4) Change QP1 in critical component list 5) Change Tma from 40 degreeC to 30 degreeC by customer request 6) The model JPW1100**19**F**, CENB1100*19**F**, JMW1100**19**F**, MENB1100*19**F** are identical to JPW1100**12**F** except for model designation, output ratings, transformers and secondary circuits. 11CA57125 Correct critical component list due to previous omission 1) Correct discharging resistor RP111, RP112 from 180K Ohm, 1/8W to 510K Ohm , 1/8W 2) Add discharging resistor RP30, RP31 typed 180Kohm , 1/8W 3) Add discharging IC typed CAP014DG, 1uF, 780Kohm 11CA63174 - Add thermal fuse type ST-22 in critical component list Project 11CA48555 Separated AC/DC Adaptor models from E300305-A32-UL to E300305-A78. The assembly is manufactured by WENDENG JEIL ELECTRONICS Co LTD(All requirements associate with this report is evaluated as UL report E300305-A32) Project 12CA56786 1. Add electrical output rating ; 48Vdc/2.1A (transformer type 3025579005A ) 2. Delete HN-1064W(+) in critical component list 3. Alternate ClassII type model ; Q type or N type( See enclosure ID 3-10) 4. Tma is changed from 30 degreeC to 35 degreeC 5. Upgrade report from UL 60950-1 2nd edition to UL 60950-1 2nd edition , Amendment1 6. Revise critical component list (listed in E300305-A78-UL) - Alternate appliance inlet type SS-120A by Rong Feng Industrial Co., Ltd - Alternate Y-Capacitor(CY1,CY2) type SE or SB , 250V, maximum 1500pF by Success Electronics Co., Ltd - Alternate Y-Capacitor(CY1,CY2) type KX or KY , 250V, maximum 1500pF by Murata Mfg.Co., Ltd - Alternate Y-Capacitor(CY3,CY4) type SE or SB , 250V, maximum 1000pF by Success Electronics Co., Ltd - Alternate Y-Capacitor(CY3,CY4) type KX or KY , 250V, maximum 1000pF by Murata Mfg.Co., Ltd - Add insulator sheet and shield. Additional Standards The product fulfills the requirements of: N/A Markings and instructions Issue Date: 2008-07-31 Page 5 of 8 Report Reference # E300305-A32-UL 2012-12-17 Clause Title Marking or Instruction Details Power rating - Model Model Number Power rating Class II symbol Symbol for Class II construction (60417-2-IEC-5172) Power rating Company identification Power rating Ratings Listee's or Recognized company's name, Trade Name, Trademark or File Number Ratings (voltage, frequency/dc, current) Special Instructions to UL Representative Inspect the transformer(s) listed in BD1.1 per AA 1.1-(C). When the tests are conducted at other location, inspect test record and specification sheet provided by the component manufacturer. Verify the specification sheet indicates 100 % routine test specified in BD 1.1 be conducted at the component manufacturer. Products covered in this procedure which are received from factory locations covered by File E300305, Volume X2 bearing the split inspection marking noted below are authorized for use in products covered in this procedure which bear the UL Listing Mark. Products not bearing the split inspection marking are not authorized for use in products at factory locations covered by E300305, Volume X1 which bear the UL Listing Mark. Special Split Inspection Marking ; S-JPW1100**12**F**, S-JPW1100**13**F**, S-JPW1100**15**F**, S-JPW1100**16**F**, SJPW1100**18**F**, S-JPW1100**19**F**, S-JPW1100**24**F**, S-CENB1100*12**F**, SCENB1100*13**F**, S-CENB1100*15**F**, S-CENB1100*16**F**, S-CENB1100*18**F**, SCENB1100*19**F**, S-CENB1100*24**F**, S-JMW1100**12**F**, S-JMW1100**13**F**, SJMW1100**15**F**, S-JMW1100**16**F**, S-JMW1100**18**F**, S-JMW1100**19**F**, SJMW1100**24**F**, S-MENB1100*12**F**, S-MENB1100*13**F**, S-MENB1100*15**F**, SMENB1100*16**F**, S-MENB1100*18**F**, S-MENB1100*19**F**, S-MENB1100*24**F** (Where * may be alphanumeric) Issue Date: 2008-07-31 Page 6 of 8 Report Reference # E300305-A32-UL 2012-12-17 Production-Line Testing Requirements Electric Strength Test Special Constructions - Refer to Generic Inspection Instructions, Part AC for further information. Model Component All models Transformer(T1 ) Removable Parts Test probe location N/A Primary to Secondary V rms 300 0 V dc Test Time, s 4242 1s Earthing Continuity Test Exemptions - This test is not required for the following models: All models(except for Class I unit) Electric Strength Test Exemptions - This test is not required for the following models: Electric Strength Test Component Exemptions - The following solid-state components may disconnected from the remainder of the circuitry during the performance of this test: Sample and Test Specifics for Follow-Up Tests at UL Model N/A Component Material Test Sample(s) Test Specifics Issue Date: 2008-07-31 Page 7 of 8 Report Reference # E300305-A32-UL 2012-12-17 1.5.1 Object/part or Description TABLE: list of critical components Manufacturer/ type/model trademark Enclosure(Elec./Mech./Fi Sabic Innovative re)_Optional Plastics Enclosure(Elec./Mech./Fi Cheil Industries re) - Alternate_Optional Nameplate Label_Optional Various Assembly BridgePower or Wendeng Jeil 940(f1) technical data Overall Sized approx 149.8 by 86.6 by 51.0 mm. Min 2.0 mm thickness, V-0. Composed of two pieces, secured together by screws.RTI=120 degreeC HN-1064(+) Overall Sized approx 149.8 by 86.6 by 51.0 mm. Min 2.0 mm thickness, V-0. Composed of two pieces, secured together by screws.RTI=130 degreeC Various Suitable for use on surface of Polycarbonate (PC) with Max. 60°C surface temperature. See test report E300305-A78SJPW1100*********, UL SJMW1100********* , SCENB1100******** , SMENB1100******* * Product Category CCN(s) QMFZ2 Required Marks of Conformity USR QMFZ2 USR PGDQ2, PGAA USR QQGQ3/9 USU/CNU Pass Supplement ID Issue Date: 2008-07-31 Page 8 of 8 Report Reference # E300305-A32-UL 2012-12-17 Enclosures Type Supplement Id Description Photographs 3-01 Top view Photographs 3-02 Bottom view Photographs 3-03 Internal top view 1 Photographs 3-04 Internal top view 2 Photographs 3-05 Internal bottom view 1 Photographs 3-06 Internal bottom view 2 Photographs 3-07 internal Top View_JPW1100**13**F**, JPW1100**16**F**,JMW1100**13**F**,JMW1100**16**F**, CENB1100*13**F**, CENB1100*16**F**,MENB1100*13**F**, MENB1100*16**F** Photographs 3-08 Internal Bottom View1_JPW1100**13**F**, JPW1100**16**F**,JMW1100**13**F**,JMW1100**16**F**, CENB1100*13**F**, CENB1100*16**F**,MENB1100*13**F**, MENB1100*16**F** Photographs 3-09 Internal Bottom View2_JPW1100**13**F**, JPW1100**16**F**,JMW1100**13**F**,JMW1100**16**F**, CENB1100*13**F**, CENB1100*16**F**,MENB1100*13**F**, MENB1100*16**F** Photographs 3-10 External View for ClassII type Photographs 3-11 Internal View top View3 Photographs 3-12 Internal Top View 4 Miscellaneous 7-01 Label_1 Miscellaneous 7-03 Label_3 Miscellaneous 7-04 Label_4 Miscellaneous 7-05 Label_5 Miscellaneous 7-06 Shield Miscellaneous 7-07 Transformer_ 3025579001A Miscellaneous 7-08 Transformer_ 3025579002A Miscellaneous 7-09 Transformer_ 3025579003A Miscellaneous 7-10 Transformer_ 3025579004A Miscellaneous 7-11 Transformer_ 3025579005A Diagrams Schematics + PWB Manuals