Pilkor components EMI Suppression film capacitors PCX2 339x3 (Standard) MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001㎌ to 3.3㎌ Capacitance tolerance ± 10 %, ± 20 % Rated (AC) voltage 50 to 60 Hz 305 V~ Climatic category 55/105/21 Temperature range -55℃ ~ +105℃ Reference IEC specification IEC 60384-14(3rd edition) and EN 60384-14 Safety approvals UL60384-14 & CSA E60384-14:09(cUL), ENEC, EK, CQC Potting & Encapsulation material Qualified in accordance with UL 94V-0 Safety class X2 * Intermediate values of the E12 series are available to special order FEATURES APPLICATIONS . 10 to 27.5 mm lead pitch . For X2-electromagnetic interference suppression . Supplied loose in box and taped on reel . Specially designed to meet the NEW REQUIREMENTS . Consist of a low-inductive wound cell of Metallized (PP) film . potted in a flame retardant case of new IEC 60384-14 Specification(3rd edition)/ EN 60384-14/UL60384-14 requiring a 2.5kV peak pulse voltage test . Not for use in series with the mains • Please refer to caution and warning at http://www.pilkor.co.kr/download/Introductions.pdf before using these products. 107 Pilkor components EMI Suppression film capacitors PCX2 339x3 (Standard) Ordering Information l b l h h H lt P dt P0 PCX2 339 X X X X X X Code 3 Capacitance Type series Code D F J L Available versions Version & Voltage Standard / 305V Original pitch 10.0mm 15.0mm 22.5mm 27.5mm Product (lmax) code Packing method C – tol. Lead length & Height Hole to hole ( Po) 12.5 0 Loose in box ±20% lt = 5.0±1.0mm - 10.0 15.0 22.5 27.5 1 Loose in box ±10% lt = 5.0±1.0mm - 10.0 15.0 22.5 27.5 4 Loose in box ±20% lt =25.0±2.0mm - 10.0 15.0 22.5 27.5 5 Loose in box ±10% lt =25.0±2.0mm - 10.0 15.0 22.5 27.5 6 Ammopack ±20% H = 18.5mm* 12.7mm 10.0 15.0 22.5 27.5 7 Ammopack ±10% H = 18.5mm* 12.7mm 10.0 15.0 22.5 27.5 * H ; intape height ; for detailed specifications refer to chapter PACKAGING ** Some values is not following the coding rule. 108 18.0 26.0 31.0 Pitch (P) Pilkor components EMI Suppression film capacitors SAFETY APPROVALS SAFETY APPROVALS UL 60384-14 & CSA E60384-14:09(cUL) ENEC(SEMKO) * PCX2 339x3 (Standard) Voltage Value File Number 305V(AC) 1nF to 3.3㎌ E165646 305V(AC) 1nF to 3.3㎌ C ≤ 0.1㎌ 0.1㎌ < C ≤ 0.33㎌ 0.33㎌ < C ≤ 1.0㎌ 1.0㎌ < C ≤ 3.0㎌ 1nF to 3.3㎌ SE/0256-4 EK 305V(AC) CQC 305V(AC) SH03001-9001 SH03001-8001 SH03001-13001 SH03001-13002 CQC08001023138 * The ENEC-approval together with the CB-Certificate replace all national approval marks of the following countries(they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom Packaging Information SMALLEST PACKING QUANTITIES (SPQ) LOOSE IN BOX DIMENSIONS lt = 5.0 ± 1.0 mm lt = 25 ± 2.0 mm 4.0 x 10.0 x 12.5 2000 1200 5.0 x 11.0 x 12.5 1500 1000 6.0 x 12.0 x 12.5 1000 1000 5.0 x 11.0 x 18.0 1000 1000 6.0 x 12.0 x 18.0 1000 1000 7.0 x 13.5 x 18.0 1000 1000 8.5 x 15.0 x 18.0 1000 1000 10.0 x 16.5 x 18.0 1000 1000 11.0 x 18.5 x 18.0 1000 1000 6.0 x 15.5 x 26.5 1000 1000 7.0 x 16.5 x 26.5 1000 1000 8.5 x 18.0 x 26.5 500 500 10.0 x 19.5 x 26.5 500 500 13.0 x 23.0 x 26.5 500 500 11.0 x 21.0 x 31.5 500 250 13.0 x 23.0 x 31.5 250 250 15.0 x 25.0 x 31.5 250 250 18.0 x 28.0 x 31.5 200 200 21.0 x 31.0 x 31.5 150 150 109 Pilkor components EMI Suppression film capacitors PCX2 339x3 (Standard) SPECIFIC REFERENCE DATA FOR 305 VAC Tangent of loss angle at 1 khz at 10 khz -4 C ≤ 470 ㎋ 470 ㎋ < C ≤ 1 ㎌ C> 1 ㎌ ≤ 20 x 10 -4 ≤ 70 x 10 -4 - ≤ 10 x 10 ≤ 20 x 10 -4 ≤ 30 x 10 –4 Rated voltage pulse slope (dV/dt)R P = 10.0mm P = 15.0mm P = 22.5mm P = 27.5mm 550 V/㎲ 400 V/㎲ 200 V/㎲ 150 V/㎲ R between leads, for C ≤ 0.33 ㎌ 〉15 000 ㏁ RC between leads, for C > 0.33 ㎌ 〉5 000 s Withstanding(DC) Voltage (cut-off current 10mA) C ≤ 1 ㎌ C > 1 ㎌ 2250 V ; 1 min 1850 V ; 1 min Withstanding(AC) Voltage between leads and case 2400 V ; 1 min VRac = 305 V~ X2 Cap. (㎌) loose and taped bxhxl (mm) CATALOGUE NUMBER PCX2 339 ..... loose in box lt = 5 ± 1.0 mm lt = 25 ± 2.0 mm MASS (g) C – tol. ±20 % Pitch = 10.0 ± 0.4 mm C – tol. ±10 % C – tol. ±20 % C – tol. ±10 % dt = 0.6 +0.06/-0.05 mm 0.001 4.0 x 10.0x 12.5 0.8 D30102 D31102 D34102 D35102 0.0015 4.0 x 10.0x 12.5 0.8 D30152 D31152 D34152 D35152 0.0022 4.0 x 10.0x 12.5 0.8 D30222 D31222 D34222 D35222 0.0033 4.0 x 10.0x 12.5 0.8 D30332 D31332 D34332 D35332 0.0047 4.0 x 10.0x 12.5 0.8 D30472 D31472 D34472 D35472 0.0068 4.0 x 10.0x 12.5 0.8 D30682 D31682 D34682 D35682 0.01 4.0 x 10.0x 12.5 0.8 D30103 D31103 D34103 D35103 0.015 4.0 x 10.0x 12.5 0.8 D30153 D31153 D34153 D35153 0.022 4.0 x 10.0x 12.5 0.8 D30223 D31223 D34223 D35223 0.033 5.0 x 11.0 x 12.5 D30333 D31333 D34333 D35333 0.047 5.0 x 11.0 x 12.5 0.9 0.9 0.068 6.0 x 12.0 x 12.5 D30473 D30683 D31473 D31683 D34473 D34683 D35473 D35683 0.1 6.0 x 12.0 x 12.5 D30104 D31104 D34104 D35104 1.0 1.0 110 Pilkor components EMI Suppression film capacitors PCX2 339x3 (Standard) VRac = 305 V~ X2 loose and taped Cap. (㎌) bxhxl (mm) CATALOGUE NUMBER PCX2 339 ..... loose in box MASS (g) lt = 5 ± 1.0 mm C – tol. ±20 % C – tol. ±10 % Pitch = 15.0 ± 0.4 mm lt = 25 ± 2.0 mm C – tol. ±20 % C – tol. ±10 % dt = 0.8 +0.08/-0.05 mm 0.01 5.0 x 11.0 x 18.0 1.6 F30103 F31103 F34103 F35103 0.015 5.0 x 11.0 x 18.0 1.6 F30153 F31153 F34153 F35153 0.022 5.0 x 11.0 x 18.0 1.6 F30223 F31223 F34223 F35223 0.033 5.0 x 11.0 x 18.0 1.6 F30333 F31333 F34333 F35333 0.047 5.0 x 11.0 x 18.0 1.6 F30473 F31473 F34473 F35473 0.068 5.0 x 11.0 x 18.0 1.6 F30683 F31683 F34683 F35683 0.1 5.0 x 11.0 x 18.0 1.6 F30104 - F34104 - 0.1 6.0 x 12.0 x 18.0 1.8 - F31104 - F35104 0.15 7.0 x 13.5 x 18.0 1.9 F30154 F31154 F34154 F35154 0.22 8.5 x 15.0 x 18.0 2.6 F30224 F31224 F34224 F35224 0.33 10.0 x 16.5 x 18.0 3.1 F30334 F31334 F34334 F35334 0.47 11.0 x 18.5 x 18.0 4.1 F30474 F31474 F34474 F35474 Pitch = 22.5 ± 0.4 mm dt = 0.8 +0.08/-0.05 mm 0.22 6.0 x 15.5 x 26.0 3.0 J30224 J31224 J34224 J35224 0.33 7.0 x 16.5 x 26.0 3.5 J30334 J31334 J34334 J35334 0.47 8.5 x 18.0 x 26.0 4.4 J30474 J31474 J34474 J35474 0.68 10.0 x 19.5 x 26.0 5.5 J30684 J31684 J34684 J35684 1.0 13.0 x 23.0 x 26.0 8.0 J30105 J31105 J34105 J35105 Pitch = 27.5 ± 0.4 mm dt = 0.8 +0.08/-0.05 mm 0.68 11.0 x 21.0 x 31.0 7.8 L30684 L31684 L34684 L35684 1.0 13.0 x 23.0 x 31.0 10.4 L30105 L31105 L34105 L35105 1.5 15.0 x 25.0 x 31.0 12.8 L30155 L31155 L34155 L35155 2.2 18.0 x 28.0 x 31.0 17.2 L30225 L31225 L34225 L35225 3.3 21.0 x 31.0 x 31.0 20.4 L30335 L31335 L34335 L35335 Original pitch 10.0mm 15.0mm 22.5mm 27.5mm New Code PCX2 339D3xxxx PCX2 339F3xxxx PCX2 339J3xxxx PCX2 339L3xxxx Old Code PCX2 339 3xxxx PCX2 339 4xxxx PCX2 339 5xxxx PCX2 339 6xxxx 111 Example PCX2 339 50474 => PCX2 339J30474 Pilkor components EMI Suppression film capacitors PCX2 339x3 (Standard) MOUNTING NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to chapter "PACKAGING". SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. . For pitches of 15mm the capacitors shall be mechanically fixed by leads. . For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors are shown in the following drawing ; b max = b + 0.3mm Eccentricity Imax = I +0.3 mm - Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. - Product height with seating plane as given by IEC 60717 as reference : hmax ≤ h+0.3mm 112 Pilkor components EMI Suppression film capacitors PCX2 339x3 (Standard) RATINGS AND CHARACTERISTICS Unless otherwise specified all electrical values apply to an ambient temperature of 23±1℃, an atmospheric pressure of 86 to 106kPa and a relative humidity 50±2%. For reference testing, a conditioning period shall be applied of 96±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. Maximum RMS Voltage as a function of frequency 103 AC voltage (V) 102 101 101 102 103 104 f(Hz) AC voltage (RMS value) as a function of frequency at Tamb≤105℃ 113 105 Pilkor components EMI Suppression film capacitors PCX2 339x3 (Standard) PRODUCT MARKING Capacitors are marked as having following information; 1.Manufacturer (PILKOR), 2.Manufacturer's type designation (PCX2 339 ) 3.Rated capacitance in code according to IEC 60062 4.Rated (AC) voltage (305V~) 5.Sub class (X2) 6.Tolerance on rated capacitance M =±20 % K = ±10 % 7.Climatic category (55/105/21) 8.Code for dielectric material (MKP) 9.Year and week of manufacturing (e.g. 1401) 10.Safety approvals Example of marking Pitch P = 7.5mm or 10mm or 15.0mm 10n M 305V~ 10n M 305V~ X2 339 PILKOR 1401 339 PILKOR 1401 CQC X2 CQC 305V~ 305V~ Marking on the side Marking on the side or Pitch P = 15.0mm or P = 22.5 mm or P = 27.5mm PILKOR 150n M 305V~ X2 PCX2 339 MKP 1401 CQC 55/105/21 Marking on the top 305V~ Marking on the side Pitch P = 22.5 mm or P = 27.5mm 1u M 305V~ X2 PCX2 339 MKP PILKOR 1401 CQC 55/105/21 305V~ Marking on headface Pitch P = 27.5mm 1u M 305V~ 339 PILKOR 1401 X2 CQC 305V~ Marking on the top 114