BC Components Product specification Interference suppression film capacitors MKP 336 2 MKP RADIAL POTTED TYPE PITCH 10/15/22.5/27.5 mm handbook, full pagewidth P = 10 mm P = 15 mm P = 22.5 and 27.5 mm CBA207 Fig.1 Simplified outlines. FEATURES QUICK REFERENCE DATA • 10 to 27.5 mm lead pitch • Supplied loose in box and taped on reel • Consists of a low-inductive wound cell of metallized polypropylene film, potted in a flame-retardant case. DESCRIPTION VALUE Capacitance range (E12 series) 1 nF to 2.2 µF Capacitance tolerance ±20%; ±10%; ±5% Rated (AC) voltage, 50 to 60 Hz 275 V Rated (DC) voltage 630 V Climatic category 55/100/21/C Rated temperature 100 °C APPLICATIONS Maximum application temperature 100 °C • For X2 electromagnetic interference suppression Reference specifications IEC 60384-14 2nd edition and EN 132400 • Specially designed to meet the NEW REQUIREMENTS of the new “IEC 60384-14 2nd edition and EN 132400”, requiring a 2.5 kV peak pulse voltage test and UL1414 and CSA-C22.2 No. 1 specifications. Safety approvals: DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-14/108”. 1999 Apr 29 250 V UL1414; CSA-C22.2 No. 1, note 1 275 V UL1283; SEV; VDE; FI; N; D; S; IMQ; ÖVE, note 1; CCEE, note 2 Materials qualified in accordance with UL94V-O Safety class X2 Notes 1. Approved. 2. Pending. 319 BC Components Product specification Interference suppression film capacitors MKP 336 2 SAFETY APPROVALS SAFETY APPROVALS (X2) V D E N D .. OVE 1999 Apr 29 VOLTAGE VALUE FILE NUMBERS UL1414 250 V (AC) 1 nF to 1 µF E 112471 UL1283 275 V (AC) 1 nF to 2.2 µF E 109565 CSA-C22.2 No.1-M90 250 V (AC) 1 nF to 1 µF LR 94054 SEV (EN132400) 275 V (AC) 1 nF to 2.2 µF 96,770678 VDE (EN132400) 275 V (AC) 1 nF to 2.2 µF 83618 FI (EN132400) 275 V (AC) 1 nF to 2.2 µF 176515 NEMKO (EN132400) 275 V (AC) 1 nF to 2.2 µF P94101881 DEMKO (EN132400) 275 V (AC) 1 nF to 2.2 µF 302811 SEMKO (EN132400) 275 V (AC) 1 nF to 2.2 µF 9439096 IMQ (EN132400) 275 V (AC) 1 nF to 2.2 µF V 3732 ÖVE (EN132400) 275 V (AC) 1 nF to 2.2 µF E 260-000-00 CCEE 275 V (AC) 1 nF to 2.2 µF pending 320 BC Components Product specification Interference suppression film capacitors MKP 336 2 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES MULTIPLIER (nF) 10.0 mm 336 2 X2 0.1 2 CAPACITANCE 1 3 (numerically) 10 4 100 5 15.0 mm 22.5 mm 27.5 mm Example: 104 = 10 × 10 = 100 nF 2222 TYPE PACKAGING(1) loose in box 2X XX X LEAD CONFIGURATION lead length 3.5 mm 336 2 X2 336 C-TOL ±20% lead length 25.0 mm PREFERRED TYPES 0 6 ON REQUEST 336 2 X2 loose in box taped on reel lead length 3.5 mm lead length 25.0 mm H = 18.5 mm; note 2 ±10% 2222 336 21... ±20% 2222 336 23... ±10% 2222 336 24... 2222 336 27... Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. 1999 Apr 29 321 BC Components Product specification Interference suppression film capacitors MKP 336 2 MKP 336 2 GENERAL DATA PITCH 10/15 mm b l handbook, full pagewidth h lt ∅dt P CBA196 Fig.3 Outline. Specific reference data for the 275 V AC (X2) capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz C ≤ 100 nF ≤10 × 10−4 ≤50 × 10−4 100 nF < C ≤ 220 nF ≤20 × 10−4 ≤100 × 10−4 Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 385 V (DC) 100 V/µs R between leads, for C ≤ 0.33 µF at 100 V; 1 minute >15000 MΩ R between leads and case; 100 V; 1 minute >30000 MΩ Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2200 V; 1 minute Withstanding (AC) voltage between leads and case 2050 V; 1 minute 1999 Apr 29 322 BC Components Product specification Interference suppression film capacitors MKP 336 2 URac = 275 V (X2); URdc = 630 V CATALOGUE NUMBER C (µF) DIMENSIONS b×h×l (mm) LOOSE IN BOX MASS (g) lt = 3.5 +1/−0.5 mm(1) lt = 25.0 ±2.0 mm C-tol = ±20% catalogue number(2) last 5 digits(2) 2222 336 20102 .. 26102 2222 336 20152 .. 26152 0.0022 2222 336 20222 .. 26222 0.0033 2222 336 20332 .. 26332 0.0047 2222 336 20472 .. 26472 2222 336 20682 .. 26682 Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.001 0.0015 0.0068 0.01 4.0 × 10.0 × 12.5 5.0 × 11.0 × 12.5 0.6 0.9 2222 336 20103 .. 26103 0.015 2222 336 20153 .. 26153 0.022 2222 336 20223 .. 26223 2222 336 20333 .. 26333 0.01 2222 336 29001 .. 29097 0.015 2222 336 29011 .. 29071 2222 336 29021 .. 29076 2222 336 29031 .. 29082 2222 336 20473 .. 26473 0.033 6.0 × 12.0 × 12.5 1.0 Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.022 0.033 5.0 × 11.0 × 17.5 1.2 0.047 0.068 2222 336 20683 .. 26683 0.1 6.0 × 12.0 × 17.5 1.4 2222 336 20104 .. 26104 0.15 8.5 × 15.0 × 17.5 2.6 2222 336 20154 .. 26154 0.22 10.0 × 16.5 × 17.5 3.1 2222 336 20224 .. 26224 Notes 1. lt = 3.5 ±0.3 mm for pitch = 15 mm. 2. The shading indicates preferred types. 1999 Apr 29 323 BC Components Product specification Interference suppression film capacitors MKP 336 2 MKP 336 2 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth h lt ∅dt P CBA196 Fig.4 Outline. Specific reference data for the 275 V AC (X2) capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz 150 nF < C ≤ 470 nF ≤20 × 10−4 ≤100 × 10−4 C > 470 nF ≤70 × 10−4 − Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 385 V (DC) 100 V/µs R between leads, for C ≤ 0.33 µF at 100 V; 1 minute >15000 MΩ RC between leads, for C > 0.33 µF at 100 V; 1 minute >5000 s R between leads and case; 100 V; 1 minute >30000 MΩ Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s: C ≤ 1 µF 2200 V; 1 minute C > 1 µF 1800 V; 1 minute Withstanding (AC) voltage between leads and case 1999 Apr 29 2050 V; 1 minute 324 BC Components Product specification Interference suppression film capacitors MKP 336 2 URac = 275 V (X2); URdc = 630 V CATALOGUE NUMBER C (µF) DIMENSIONS b×h×l (mm) LOOSE IN BOX MASS (g) lt = 3.5 ±0.3 mm lt = 25.0 ±2.0 mm C-tol = ±20% catalogue number(1) last 5 digits(1) Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.15 6.0 × 15.5 × 26.0 2.9 2222 336 29041 .. 29087 0.22 7.0 × 16.5 × 26.0 3.2 2222 336 29051 .. 29093 0.33 8.5 × 18.0 × 26.0 4.4 2222 336 20334 .. 26334 0.47 10.0 × 19.5 × 26.0 5.5 2222 336 20474 .. 26474 5.5 2222 336 29055 .. 29095 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.47 9.0 × 19.0 × 31.0 0.68 11.0 × 21.0 × 31.0 7.8 2222 336 20684 .. 26684 1 13.0 × 23.0 × 31.0 10.4 2222 336 20105 .. 26105 1.5 18.0 × 28.0 × 31.0 17.2 2222 336 20155 .. 26155 2.2 21.0 × 31.0 × 31.0 20.4 2222 336 20225 .. 26225 Note 1. The shading indicates preferred types. 1999 Apr 29 325 BC Components Product specification Interference suppression film capacitors MKP 336 2 CONSTRUCTION SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD Description The maximum length and width of film capacitors is shown in Fig.6: • Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant polypropylene case • Radial leads, solder-coated: – Copper clad steel wire for pitch = 10 and 15 mm – Copper wire for pitch = 22.5 and 27.5 mm • Eccentricity as in Fig.6. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. • Product height with seating plane as given by “IEC 60717” as reference: hmax ≤ h + 0.3 mm. • Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. handbook, halfpage bmax = b + 0.3 mm eccentricity MKP metallized polypropylene film handbook, halfpage lmax = l + 0.3 mm CBA116 Fig.6 Lay-out. Storage temperature metal spray layer • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation. connecting wire CBA198 Fig.5 Construction. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter “Packaging information”. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For pitches ≤15 mm capacitors shall be mechanically fixed by the leads. • For larger pitches the capacitors shall be mounted in the same way and the body clamped. 1999 Apr 29 326 BC Components Product specification Interference suppression film capacitors MKP 336 2 CHARACTERISTICS Capacitance CBA505 4 handbook, full pagewidth ∆C C (%) 2 typical 0 max. −2 −4 min. −6 −50 0 50 100 Tamb (°C) Fig.7 Capacitance change at 1 kHz as a function of temperature. Tangent of loss angle CBA212 103 handbook, full pagewidth dissipation factor (× 10−4) 102 220 F 1µ C> µF 1 C≤ F< n F< 47 n nF nF ≤ 47 F<C nF 0 1 C≤ 102 103 104 Fig.8 Tangent of loss angle as a function of frequency: typical curves. 1999 Apr 29 220 10 n 10 1 10 C≤ 327 f (Hz) 105 BC Components Product specification Interference suppression film capacitors MKP 336 2 Impedance CBA208 103 handbook, full pagewidth 1 nF Impedance (Ω) 4.7 102 nF 10 n F 47 n 100 10 470 100 F nF nF 0 nF 1 10−1 10−2 104 105 106 107 f (Hz) 108 Fig.9 Impedance as a function of frequency: typical curves. Resonant frequency CBA879 102 handbook, full pagewidth f (MHz) 10 X2 1 10−1 1 10 102 103 104 C (nF) Fig.10 Resonant frequency as a function of capacitance: typical curves. 1999 Apr 29 328 BC Components Product specification Interference suppression film capacitors MKP 336 2 Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb ≤ 100 °C CBA211 103 handbook, full pagewidth AC voltage (V) 102 10 10 102 103 104 105 f (Hz) Fig.11 AC voltage (RMS value) as a function of frequency at Tamb ≤ 100 °C. CBA935 103 handbook, full pagewidth 2200 nF AC current (mA) 1000 nF 102 470 nF 100 nF 10 47 nF 1 4.7 nF 10 nF 1 nF 10−1 10 102 103 104 f (Hz) Fig.12 AC current (RMS value) as a function of frequency at Tamb ≤ 100 °C. 1999 Apr 29 329 105 BC Components Product specification Interference suppression film capacitors MKP 336 2 Insulation resistance CBA204 106 handbook, full pagewidth RC (s) 105 104 0 20 40 60 80 Tamb (°C) 100 Fig.13 RC product as a function of ambient free air temperature: typical curve. APPLICATION NOTES • For X2 electromagnetic interference suppression in across the line applications (50 to 60 Hz) with a maximum mains voltage of 275 V (AC). • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse program must be used, such as: 2222 375 .....; 2222 383 ..... or 2222 479 ..... • The maximum ambient temperature must not exceed 100 °C. • Rated voltage pulse slope: – If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC) and divided by the applied voltage. 1999 Apr 29 330 BC Components Product specification Interference suppression film capacitors MKP 336 2 MARKING Product marking FRONT FACE handbook, halfpage 10n M 336 2 PH 275V~X2 250V~ PB501 1. Rated capacitance code in accordance with “IEC 60062” N D V D E ÖVE The capacitors are marked by laser print; on the top for pitch ≥ 22.5 mm (see Fig.16), on the top and one side for pitch = 15 mm (see Fig.15) or on one side for pitch = 10 mm (see Fig.14) with the following information: 2. Tolerance on rated capacitance; M = ±20%; K = ±10%; J = ±5% CBA955 3. Rated (AC) voltage (275 V) 4. Sub-class (e.g. X2) Fig.14 Example of marking for a capacitor with pitch = 10 mm. 5. Manufacturer’s type designation (e.g. 336 2) 6. Code for dielectric material (MKP) for pitch ≥15 mm 7. Manufacturer 8. Year and week of manufacture (e.g. 9701) for pitch ≥15 mm HEAD FACE 9. Safety approvals: products will be marked with approvals depending on the available marking space per product. Although all approvals remain valid as indicated in the reference data. FRONT FACE handbook, halfpage 100n M 275V~X1 336 2 MKP PHILIPS 9701 250V~ PB501 OVE V D E EN132400 CBA915 Fig.15 Example of marking for a capacitor with pitch = 15 mm. HEAD FACE handbook, halfpage 220n M 275V~X2 OVE 336 2 MKP PB501 PHILIPS 9701 EN132400 250V~ V D E CBA215 Fig.16 Example of marking for a capacitor with pitch = 22.5 or 27.5 mm. 1999 Apr 29 331 BC Components Product specification Interference suppression film capacitors MKP 336 2 Package marking The package containing the capacitors is marked as shown Fig.17. Please note: In due time BC COMPONENTS will replace PHILIPS COMPONENTS Barcode label marking handbook, full pagewidth 1. LINE MARKING EXPLANATION 3. 1 Manufacturer’s name 4. 2 Country of origin 5. 3 Sub-family 4 Type description and sub class 5 Capacitance value, tolerance, voltage and climatic category (“IEC 60068-1”) 6 Safety approvals 7 Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO Wage number of final inspection (only for capacitors with pitch = 10 mm) 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) 2. 6. 7. 8. 9. 10. CCA329 Fig.17 Barcode label. 1999 Apr 29 332 BC Components Product specification Interference suppression film capacitors MKP 336 2 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile strength: “IEC 60068-2-21” load 10 N; 10 s Bending: “IEC 60068-2-21” load 5 N; 4 × 90° Resistance to soldering heat: “IEC 60068-2-20” solder bath: 260 °C; 10 s Component solvent resistance no visible damage legible marking ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 −4 isopropyl alcohol; 23 °C; 5 minutes ∆tan δ ≤ 70 × 10 (C > 470 nF); note 2 Robustness of component Rapid change of temperature: “IEC 60068-2-14” 5 cycles 1 cycle = 30 minutes at −55 °C and 30 minutes at 100 °C Vibration: “IEC 60068-2-6” 10 to 55 Hz; amplitude 0.75 mm; 6 hours Shock: “IEC 60068-2-27” half sinewave; 490 m/s2; 11 ms ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 Climatic sequence Dry heat: “IEC 60068-2-2” 16 hours; 100 °C Damp heat, cyclic, test Db, first cycle: “IEC 60068-2-30” Cold: “IEC 60068-2-1” ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 2 hours; −55 °C Damp heat, cyclic, test Db, remaining cycles: “IEC 60068-2-30” Voltage proof: “IEC 60384-14” Rins ≥ 50% of specified value Vp = 1200 V (DC); 1 minute Other applicable tests Damp heat, steady state: “IEC 60068-2-3” 21 days; 40 °C; 90 to 95% RH no load Vp = 1200 V (DC); 1 minute Endurance (AC): “IEC 60384-14” 3 × 2.5 kV pulse voltage 1999 Apr 29 ∆C/C ≤ 5% ∆tan δ ≤ 70 × 10−4 Rins ≥ 50% of specified value ∆C/C ≤ 10% 1000 hours; 1.25 × URac at ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 100 °C; once per hour; 0.1 s; ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 1000 V (RMS) via resistor of 47 Ω; ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 Vp = 1200 V (DC); 1 minute Rins ≥ 50% of specified value 333 BC Components Product specification Interference suppression film capacitors MKP 336 2 PROCEDURE (quick reference) TEST REQUIREMENTS ∆C/C ≤ 10% Charge and discharge: “IEC 60384-14” 10000 cycles; 5 ms; 1.5 × dV/dt Passive flammability: “IEC 60384-14” class C no burning Active flammability: “IEC 60384-14” 20 × 2.5 kV discharge no burning Heat storage: “IEC 60384-14” 1000 hours; 100 °C ∆C/C ≤ 5% Resistance to soldering heat with preheating: “IEC 60384-14” preheating: 100 °C; solder bath: 260 °C; 10 s Active flammability test voltage proof up to 4 kV (DC) or until breakdown (100 V/s, current limited 2 mA) ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 Rins ≥ 50% of specified value ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 no burning failed capacitors connected to a 250 V (AC) power supply during 5 minutes Notes 1. For detailed information: see “Type detail specification HQN-384-14/108”. 2. Measuring frequency 100 kHz for C ≤ 470 nF and 10 kHz for C > 470 nF. 1999 Apr 29 334