Pilkor components EMI Suppression film capacitors PCX2 337x1 (Standard) MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01㎌ to 3.3㎌ Capacitance tolerance ±10 %, ±20 % Rated (AC) voltage 50 to 60 Hz 275 V~ Climatic category 40/100/21 Temperature range -40℃ ~ +100℃ Reference IEC specification IEC 60384-14(3rd edition) and EN 60384-14 Safety approvals UL60384-14 & CSA E60384-14:09(cUL), ENEC, EK, CQC Potting & Encapsulation material Qualified in accordance with UL 94V-0 Safety class X2 * Intermediate values of the E12 series are available to special order FEATURES APPLICATIONS . 10 to 27.5 mm lead pitch . For X2-electromagnetic interference suppression . Supplied loose in box and taped on reel . Specially designed to meet the NEW REQUIREMENTS . Consist of a low-inductive wound cell of Metallized (PP) film . potted in a flame retardant case of new IEC 60384-14 Specification(3rd edition)/ EN 60384-14/UL60384-14 requiring a 2.5kV peak pulse voltage test . Not for use in series with the mains • Please refer to caution and warning at http://www.pilkor.co.kr/download/Introductions.pdf before using these products. 123 Pilkor components EMI Suppression film capacitors PCX2 337x1 (Standard) Ordering Information l b l h h H lt P dt P0 PCX2 337 (X) X X XXX Code 1 Capacitance Type series *Code F Version & Voltage Standard / 275V Original pitch 15.0mm * In case of overlapping the value, use the 13NC with pitch information. Available versions Product (lmax) lt = 5.0±1.0mm Hole to hole ( Po) - 10.0 15.0 22.5 ±10 % lt = 5.0±1.0mm - 10.0 15.0 22.5 27.5 ±20 % lt =25.0±2.0mm - 10.0 15.0 22.5 27.5 Loose in box ±10 % lt =25.0±2.0mm - 10.0 15.0 22.5 27.5 Ammopack ±20% H = 18.5mm* 12.7mm 10.0 15.0 22.5 27.5 Ammopack ±10% H = 18.5mm* 12.7mm 10.0 15.0 22.5 27.5 Code Packing method C – tol. Lead length & Height 0 Loose in box ±20 % 1 Loose in box 4 Loose in box 5 6 7 * H ; intape height ; for detailed specifications refer to chapter PACKAGING ** Some values do not follow coding rule. 124 12.5 18.0 26.0 31.0 Pitch (P) 27.5 Pilkor components EMI Suppression film capacitors PCX2 337x1 (Standard) SAFETY APPROVALS SAFETY APPROVALS Voltage Value File Number 305V(AC) 10nF to 3.3㎌ E165646 ENEC(SEMKO) * 275V(AC) 10nF to 3.3㎌ SE/0256-1 EK 275V(AC) 10nF to 3.3㎌ SH03001-2003 CQC 275V(AC) 10nF to 3.3㎌ CQC04001009332 UL 60384-14 & CSA E60384-14:09(cUL) * The ENEC-approval together with the CB-Certificate replace all national approval marks of the following countries(they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom Packaging Information SMALLEST PACKING QUANTITIES (SPQ) LOOSE IN BOX DIMENSIONS lt = 5.0 ± 1.0 mm lt = 25 ± 2.0 mm 4.0 x 10.0 x 12.5 2000 1200 5.0 x 11.0 x 12.5 1500 1000 6.0 x 12.0 x 12.5 1000 1000 7.0 x 13.5 x 18.0 1000 1000 8.5 x 15.0 x 18.0 1000 1000 10.0 x 16.5 x 18.0 1000 1000 11.0 x 18.5 x 18.0 1000 1000 12.0 x 20.0 x 18.0 1000 1000 8.5 x 18.0 x 26.0 500 500 10.0 x 19.5 x 26.0 500 500 13.0 x 23.0 x 26.0 500 500 15.0 x 25.0 x 31.0 250 250 18.0 x 28.0 x 31.0 200 200 21.0 x 31.0 x 31.0 150 150 125 Pilkor components EMI Suppression film capacitors PCX2 337x1 (Standard) SPECIFIC REFERENCE DATA FOR 275 VAC Tangent of loss angle C ≤ 470 ㎋ 470 ㎋ < C ≤ 1 ㎌ C > 1 ㎌ at 1 khz at 10 khz ≤ 10 x 10 -4 ≤ 20 x 10 -4 ≤ 30 x 10 –4 ≤ 20 x 10 -4 ≤ 70 x 10 -4 - Rated voltage pulse slope (dV/dt)R P = 10.0mm P = 15.0mm P = 22.5mm P = 27.5mm 550 V/㎲ 400 V/㎲ 200 V/㎲ 150 V/㎲ R between leads, for C ≤ 0.33 ㎌ 〉15 000 ㏁ RC between leads, for C > 0.33 ㎌ 〉 5 000 s Withstanding(DC) Voltage (cut-off current 10mA) C ≤1 ㎌ 1 ㎌ ＜ C ≤3.3 ㎌ 2250 V, 1 min 1850 V, 1 min Withstanding(AC) Voltage between leads and case 2400 V ; 1 min VRac = 275 V~ X2 Cap. (㎌) bx h x (mm) loose and taped l MASS (g) CATALOGUE NUMBER PCX2 337 ..... loose in box lt = 5 ± 1.0 mm C – tol. C – tol. ±20 % ±10 % lt = 25 ± 2.0 mm C – tol. C – tol. ±20 % ±10 % Pitch = 10.0 ± 0.4 mm 4.0 x 10.0 x 12.5 0.8 4.0 x 10.0 x 12.5 0.8 4.0 x 10.0 x 12.5 0.8 5.0 x 11.0 x 12.5 0.9 5.0 x 11.0 x 12.5 0.9 6.0 x 12.0 x 12.5 1.0 6.0 x 12.0 x 12.5 1.0 dt = 0.6 +0.06/-0.05 mm 10103 11103 14103 10153 11153 14153 10223 11223 14223 10333 11333 14333 10473 11473 14473 10683 11683 14683 10104 11104 14104 15103 15153 15223 15333 15473 15683 15104 Pitch = 15.0 ± 0.4 mm 1.6 0.01 5.0 x 11.0 x 18.0 5.0 x 11.0 x 18.0 1.6 0.015 5.0 x 11.0 x 18.0 1.6 0.022 5.0 x 11.0 x 18.0 1.6 0.033 5.0 x 11.0 x 18.0 1.6 0.047 5.0 x 11.0 x 18.0 1.6 0.068 0.1 5.0 x 11.0 x 18.0 1.6 0.1 6.0 x 12.0 x 18.0 1.8 0.15 7.0 x 13.5 x 18.0 1.9 0.22 8.5 x 15.0 x 18.0 2.6 0.33 10.0 x 16.5 x 18.0 3.1 0.47 11.0 x 18.5 x 18.0 4.1 ; Mini Type ( xJxxxx ) dt = 0.8 +0.08/-0.05 mm F10103 F11103 F14103 F10153 F11153 F14153 F10223 F11223 F14223 F10333 F11333 F14333 F10473 F11473 F14473 F10683 F11683 F14683 FJ0104 FJ1104 FJ4104 F10104 F11104 F14104 10154 11154 14154 10224 11224 14224 10334 11334 14334 99001 99002 99003 F15103 F15153 F15223 F15333 F15473 F15683 FJ5104 F15104 15154 15224 15334 99004 0.01 0.015 0.022 0.033 0.047 0.068 0.1 126 Pilkor components EMI Suppression film capacitors PCX2 337x1 (Standard) VRac = 275 V~ X2 Cap. (㎌) loose and taped bx h x (mm) l MASS (g) CATALOGUE NUMBER PCX2 337 ..... loose in box lt = 5 ± 1.0 mm C – tol. C – tol. lt = 25 ± 2.0 mm C – tol. C – tol. ±20 % ±20 % Pitch = 22.5 ± 0.4 mm 0.47 0.68 1.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 13.0 x 23.0 x 26.0 4.4 5.5 8.0 1.5 2.2 3.3 Pitch = 27.5 ± 0.4 mm 15.0 x 25.0 x 31.0 12.8 18.0 x 28.0 x 31.0 17.2 21.0 x 31.0 x 31.0 20.4 ±10 % ±10 % dt = 0.8 +0.08/-0.05 mm 10474 10684 10105 10155 10225 10335 127 11474 11684 11105 14474 14684 14105 15474 15684 15105 dt = 0.8 +0.08/-0.05 mm 11155 14155 11225 14225 11335 14335 15155 15225 15335 Pilkor components EMI Suppression film capacitors PCX2 337x1 (Standard) MOUNTING NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed–circuit boards by means of automatic insertion machines. For detailed specifications refer to chapter "PACKAGING". SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. . For pitches of 15mm the capacitors shall be mechanically fixed by leads. . For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors are shown in the following drawing ; - Eccentricity as in drawing. b max = b + 0.3mm Eccentricity I max = I +0.3 mm The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. - Product height with seating plane as given by IEC 60717 as reference : hmax. ≤ h + 0.3mm 128 Pilkor components EMI Suppression film capacitors PCX2 337x1 (Standard) RATINGS AND CHARACTERISTICS Unless otherwise specified all electrical values apply to an ambient temperature of 23±1℃, an atmospheric pressure of 86 to 106kPa and a relative humidity 50±2%. For reference testing, a conditioning period shall be applied of 96±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. Maximum RMS Voltage as a function of frequency 103 AC voltage (V) 102 101 101 102 103 104 f(Hz) AC voltage (RMS value) as a function of frequency at Tamb≤100℃ 129 105 Pilkor components EMI Suppression film capacitors PCX2 337x1 (Standard) PRODUCT MARKING Capacitors are marked with the following information ; 1.Manufacturer (PILKOR) for capacitors with original pitch ≥15mm, PILKOR trade mark for pitch=10mm 2.Manufacturer's type designation (PCX2 337 ) 3.Rated capacitance in code according to IEC 60062 4.Rated (AC) voltage (275V~) 5.Sub class (X2) 6.Tolerance on rated capacitance M = ±20 % K = ±10 % 7.Climatic category (40/100/21) 8.Code for dielectric material (MKP) for capacitors with original pitch ≥15mm 9.Year and week of manufacturing (1401) 10.Safety approvals Example of marking Pitch P = 10mm 10n M 275V~ 10n M 275V~ X2 337 PILKOR 1401 337 PILKOR 1401 CQC X2 CQC 305V~ 305V~ Marking on the side or Marking on the side Pitch P = 15.0mm or P = 22.5 mm or P = 27.5mm PILKOR 150n M 275V~ X2 PCX2 337 MKP 1401 CQC 40/100/21 305V~ Marking on the top Marking on the side Pitch P = 22.5 mm or P = 27.5mm 1u M 275V~ X2 PCX2 337 MKP PILKOR 1401 CQC 40/100/21 305V~ Marking on headface Pitch P = 27.5mm 1u M 275V~ 337 PILKOR 1401 X2 CQC 305V~ Marking on the top 130