WPANT30028-SA 2.4 GHz High Gain TRUE-OMNI Antenna Description / Application This is a 6 dBi True-Omni directional Antenna that has a good Doughnut shaped pattern. This antenna can be used by any repeater system in the Wi-Fi band in order to maximize the Coverage Radius. It is terminated at the port by a Type-N Male connector. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] VSWR – Typical Peak Gain [dBi] (Typical) Efficiency [%] (Typical) Polarization Pattern Accepted Power [W] (Max) 2.4 – 2.5 GHz 50Ω < 2:1 ~ 6 dBi 75 – 85 % Linear Omni-directional 2 Watts Mechanical / Environmental Properties Antenna Height Antenna Base Antenna Color 2.72’’ max dimension Cool Grey Metal Base Black Anodized Aluminum Connector Type-N Male Antenna Radome Operating / Storage Temperature Environmental Hazardous Materials Packaging Rev: 3.0 13.72’’ (from the bottom of the Connector to the top of the Radome) Created on: February 5, 2014 ABS + Polycarbonate o o -40 C to +90 C Salt Spray Resistant, Water Ingress Resistant, UV Resistant, Ageing Resistant, Meets standards for UL 94V-0 RoHS Compliant Meets ISTA 2A Standards Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna Rev: 3.0 Created on: February 5, 2014 Created by: MKS Approved by: BP Page | 2 VSWR of the Antenna Rev: 3.0 Created on: February 5, 2014 Created by: MKS Approved by: BP Page | 3 3D Radiation Pattern of the Antenna 2.4 GHz Note: The Radiation Patterns might appear little tilted. But, this is not because of the Antenna. This is due to the tolerance in positioning of the Antenna in the 3D Anechoic Chamber. Rev: 3.0 Created on: February 5, 2014 Created by: MKS Approved by: BP Page | 4