WPANT10007-SA Dual-band Wi-Fi Embedded Antenna Description / Application This is a 2.4 GHz & 5.4 GHz Dual-band Wi-Fi on board Stamped Metal PIFA Antenna. Broad bandwidth, excellent efficiency and ease of integration make this an ideal choice for applications where performance is very important. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency* Approximate Antenna Impedance [Ω] VSWR – Typical* Peak Gain [dBi] (Typical)* Efficiency [%] (Typical)* Polarization Pattern Minimum Ground Plane Size Required 2.4 – 2.5 GHz 50Ω 4.9 – 5.85 GHz 50Ω < 2:1 < 3:1 ~ 2.5 dBi 4 to 5 dBi 80 – 90 % 55 – 80 % Linear Linear Near Omni-directional Near Omni-directional 45 – 55 mm 45 – 55 mm *Note: These performance metrics were recorded with the Antenna installed on a circuit board, with the board layout as prescribed in the Application Notes (please refer to the Application Notes). Mechanical / Environmental Properties Antenna Dimensions Antenna Color Operating / Storage Temperature Environmental Hazardous Materials Rev: 5.0 Created on: February 21, 2014 1.1’’ X 0.31’’ X 0.14’’ Metallic Silver o (27.5mm X 8mm X 3.5mm) o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna Rev: 5.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 2 VSWR of the Antenna Rev: 5.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 3 Total Radiation Efficiency of the Antenna in % (including VSWR losses) Rev: 5.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 4 Peak Gain of the Antenna in dBi Rev: 5.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 5