RF SOLUTION - NIKKOHM LEADED HIGH POWER TERMINATIONS RFTL Features and Applications High power surface mount termination for all DC up to 3GHz applications. Small size and wide frequency range specifications realized with large heat conducting AlN substrate. Sufficient mechanical strength metallization comes from spattered thin film technology. 50ohm, 100ohm and 200ohm resistance with tolerance 1% and 10W, 20W, 30W, 150W and 250W provided as standard, and other resistance and power also available. Long life and temperature stability a result of Ni-Cr thin film technology. Applications include power splitters, power combiners, balancing resistors, termination for wide band transformer circuits and termination for isolator/circulators, fixed station of mobile communication electronics, and high power microwave amplifiers. Style and Dimension (mm) B E B C C E F F D A Style A Type RFTL05 RFTL10 RFTL20 RFTL30 RFTL50 RFTL60 RFTL100 RFTL100Y RFTL250 Power 5 10 20 30 50 60 100 100 250 Style A A A A B B B B B A D Style B A 2.54 2.54 5.08 5.08 5.08 6.35 5.84 8.89 9.52 B 1.27 1.27 2.54 2.54 5.08 6.35 8.89 5.84 9.52 C 1.27 1.27 1.27 1.27 2.2MAX 2.2MAX 2.2MAX 2.2MAX 2.2MAX D 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 E 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 F 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 RF SOLUTION - NIKKOHM RFTL LEADED HIGH POWER TERMINATIONS Ordering Information Ordering P/N RFTL10A C50 OhmF000 RFTL50A C50 OhmF000 RFTL100B C100 OhmF000 RFTL100YB C100 OhmF000 RFTL250B C50 OhmF000 Type Style TCR Resistance Tolerance Packaging Remarks RFTL10 RFTL50 RFTL100 RFTL100Y RFTL250 A A B B B C C C C C 50 Ohm 50 Ohm 100 Ohm 100 Ohm 50 Ohm F F F F F Tray Tray Tray Tray Tray Bulk only Bulk only Bulk only Bulk only Bulk only Specifications and Performances Type Rating Power Max. Power RFTL05 RFTL10 RFTL20 RFTL30 RFTL50 RFTL60 RFTL100 RFTL100Y RFTL250 5W 10W 20W 30W 50W 60W 100W 100W 250W 25W 50W 50W 50W 125W 150W 200W 250W 500W TCR 50ppm/K (C) Derating Curve ％ Rated Power 100 80 Resistance 50 Ohm 100 Ohm 150 Ohm 200 Ohm Tolerance Heat Resistance ±1% (F) 12.5C/W 6.5 C/W 6.5 C/W 6.5 C/W 2.5 C/W 2.1 C/W 1.3 C/W 1.3 C/W 0.5 C/W VSWR At 1GHz 1.15 1.15 1.15 1.15 1.2 1.2 1.2 1.2 1.2 Rating Temp. Operating Temp +25C -55C to +155C Structure and Materials Strip lead Alumina cover Resistor AlN substrate Solder plated Cu 60 40 20 0 -50 0 50 100 150 Heat sink temperature.（C） Note: (1) Rated power is defined at attached on a heat-sink plate of +25 C temperature by soldering. When higher temperature, power shall be derated as above shown curve. (2) Termination has two terminals, one is plate tab terminal and other is backing plate that will be attached on heat sink by soldering. (3) There is no mechanical moving or vibration between strip terminal attached on strip line circuit and heat sink. (4) Other resistance value are available. Please call factory. 20041009