Optical Liquid Level Sensors D200HD Series Features: * M12 Threaded Body * Heavy Duty Style * Wider range of options * Wide range of Commercial, Industrial & Automotive applications. Housing Style HD200 M12 Thread (1) Output Function Digital (High or Low in Air) outputs Repeatability Hysteresis Response time rising liquid ± 1mm 1mm depending on liquid 50µS Response time falling liquid (ethanol) < 1 second Supply Voltage (Vs) 5 to 16Vdc or 10 to 28Vdc (see below) Supply Current 15mA nominal Sink / Source Current 250mA or 500mA max (see below) Temperature range: operating -25°C to +80°C or –40° to +125°C Housing Material Polysulphone UDEL 1700 Cable Length 200mm PTFE wires Environmental IP67 Rated Thermal Testing As per BS EN60068-2-33 Humidity As per BS EN60068-2-30 Vibration As per BS EN60068 Part S3: 1996 Mechanical Shock As per BS EN60068-2-27 Part 2 Ea: 1987 Max. Pressure 7 bar 1) Stainless steel nut & nitrile washer available separately (order LLPK1) Order Codes: D 2 * 0 *H D * ** - 0 0 * Temp Range 0: -25°C to +80°C 1: -40°C to +125°C Supply Voltage 12: 5 to 16VDC 24: 10 to 28VDC Sink / Source Current 0: 250mA max 5: 500mA max Output Circuit 1: N-Channel Open Drain with flyback diode* 2: Digital Output (Sink current only) 3: N-Channel Open Drain 4: P-Channel Open Drain 5: N & P Channel Push-Pull Output Output Polarity L: Output Low in Air H: Output High in Air Drawing dimensions in millimetres * For use with inductive loads American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com © American Electronic Components Inc 2008 Specifications are subject to change without notice. E&OE. D200HD 100209