Optical Liquid Level Sensors D600D Series * 1/2” SAE Threaded Body * Low cost * Compact size * High reliability * Wide range of commercial and industrial applications. Features: Housing Style D600 1/2” SAE-20 Thread (1) Output Function Digital (High or Low in Air) outputs Repeatability ± 1mm Hysteresis 1mm depending on liquid Response time rising liquid 50µS Response time falling liquid (ethanol) < 1 second Supply Voltage (Vs) Supply Current 5 to 12Vdc 15mA nominal Sink / Source Current Temperature range: operating / (storage) Housing Material Cable Length 15mA -25°C to +80°C / (–30° to +85°C) Polysulphone UDEL 1700 200mm PTFE wires Environmental Thermal Testing IP67 Rated As per BS EN60068-2-33 Humidity As per BS EN60068-2-30 Vibration As per BS EN60068 Part S3: 1996 Mechanical Shock Max. Pressure As per BS EN60068-2-27 Part 2 Ea: 1987 7 bar Order Codes: High in Air Sensors: Output Voltage in Liquid < 1Vdc; Output Voltage in Air is within Vs - 0.5Vdc 3 Wire 4 Wire (2) D600D3SH D600D4SH Low in Air Sensors: Output Voltage in Liquid is within Vs - 0.5VDC; Output Voltage in Air < 1Vdc 3 Wire 4 Wire (2) 1) 2) D600D3LSH D600D4LSH “O” Ring supplied, unassembled. In certain applications (when used in certain liquids or emulsions and in heavily condensing applications), it may be necessary to “tune” the sensor’s operation using a 4th wire connected directly to the LED. This requires the installer to select a suitable current limiting resistor—contact factory for details. Drawing dimensions in millimetres American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com © American Electronic Components Inc 2008 Specifications are subject to change without notice. E&OE. D600D 290808