Optical Liquid Level Sensors D200HP Series Features: * M12 Threaded Body * Heavy Duty Style * High Output Current * Eliminates need for intermediate control systems HD200 (1) M12 Plastic HD600 (2) 1/2” SAE - 20 Plastic NPN / PNP (open collector) ± 1mm 1mm depending on liquid 50µS < 1 second 10 to 40VDC 25mA nominal 500mA -25°C to +80°C Polysulphone UDEL 1700 200mm PTFE wires IP67 Rated As per BS EN60068-2-33 As per BS EN60068-2-30 As per BS EN60068 Part S3: 1996 As per BS EN60068-2-27 Part 2 Ea: 1987 5 bar Housing Style Output Function Repeatability Hysteresis Response time rising liquid Response time falling liquid (ethanol) Supply Voltage (Vs) Supply Current Sink / Source Current Temperature range: operating Housing Material Cable Length Environmental Thermal Testing Humidity Vibration Mechanical Shock Max. Pressure Drawing dimensions in millimetres Order Codes: D 200HP * * * Output Polarity L: Output Low in Air H: Output High in Air Output Circuit 1: NPN (open collector) 2: PNP (open collector) 3: Push - Pull 1) 2) Stainless steel nut & nitrile washer available separately (order LLPK1) “ 0 “ Ring supplied unassembled. Mounting 0: M12 Thread (1) 1: 1/2” SAE Thread (2) American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: [email protected] http://www.aecsensors.com © American Electronic Components Inc 2008 Specifications are subject to change without notice. E&OE. D200HP 010908