Datasheet

SURFACE MOUNT,
HIGH REPEATABILITY,
BROADBAND
TO-5 RELAYS
DPDT
SERIES
DESIGNATION
SGRF300
Repeatable, RF TO-5 relay
SGRF303
Sensitive, repeatable, RF TO-5 relay
DESCRIPTION
UPPER
STATIONARY
CONTACT
UNIFRAME
MOVING
CONTACT
ARMATURE
LOWER
STATIONARY
CONTACT
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
Storage
–65°C to +125°C
Operating
–55°C to +85°C
Vibration
(General Note 1)
10 g’s to 500 Hz
Shock
(General Note 1)
30 g’s,
6ms half sine
Enclosure
Hermetically sealed
SGRF300
0.09 oz. (2.55g) max.
SGRF303
0.16 oz. (4.5g) max.
© 2007 TELEDYNE RELAYS
The ultraminiature SGRF300 and SGRF303 relays are
designed to provide a practical surface-mount solution with
improved RF signal repeatability over the frequency range.
SGRF300 and SGRF303 relays feature a unique ground
shield that isolates and shields each lead to ensure excellent
contact-to-contact and pole-to-pole isolation. This ground
shield provides a ground interface that results in improved highfrequency performance as well as parametric repeatability. The
SGRF300 and SGRF303 extend performance advantages
over similar RF devices that simply offer formed leads for
surface mounting.
These relays are engineered for use in RF attenuator, RF
switch matrices, ATE and other applications that require
dependable high frequency signal fidelity and performance.
SHOWN WITHOUT GROUND SHIELD
Weight
SGRF300
SGRF303
RELAY TYPE
INTERNAL CONSTRUCTION
Temperature
(Ambient)
SERIES
The SGRF300 and SGRF303 feature:
• High repeatability
• Broader bandwidth
• Metal enclosure for EMI shielding
• High isolation between control and signal paths
• High resistance to ESD
The following unique construction features and manufacturing
techniques provide excellent robustness to environmental
extremes and overall high reliability:
• Uniframe motor design provides high magnetic efficiency
and mechanical rigidity
• Minimum mass components and welded construction
provide maximum resistance to shock and vibration
• Advanced cleaning techniques provide maximum
assurance of internal cleanliness
• Gold-plated precious metal alloy contacts ensure reliable
switching
• Hermetically sealed
(800) 284-7007 • www.teledynerelays.com
SGRF300/SGRF303 Page 1
SGRF300SGRF303\052007\Q1
SERIES SGRF300 AND SGRF303
TYPICAL RF CHARACTERISTICS (See RF Notes)
Isolation Across Contacts (RF Note 4)
Isolation Pole to Pole (RF Note 5)
0
0
-10
-10
De-energized
-20
Normally Open
-20
Isolation (dB)
Isolation (dB)
Energized
Normally Closed
-30
-40
-30
-40
-50
-50
-60
-70
-60
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
0
6000
500
1000
1500
2000
3500
4000
4500
5000
5500
6000
2.0
-0.2
1.8
Normally Closed
Normally Open
-0.4
Normally Closed
Normally Open
1.6
VSWR
Insertion Loss (dB)
3000
VSWR (RF Note 6)
Insertion Loss (RF Note 6)
0
-0.6
-0.8
1.4
1.2
-1
0
2500
Frequency (MHz)
Frequency (MHz)
1.0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
0
6000
500
1000
1500
2000
Frequency (MHz)
2500
3000
3500
4000
4500
5000
5500
6000
Frequency (MHz)
SGRF300 Time Response (RF Note 6)
1.1
0.9
90%
Volt
0.7
37ps reference
0.5
62.3ps propagation delay time
0.3
51.3ps pulse rise time
10%
0.1
-0.1
-100
0
100
200
300
400
500
600
700
800
900
Time (ps)
RF NOTES
a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid® 6002 with SMA connectors.
(RT/duroid® is a registered trademark of Rogers Corporation.)
b. RF ground shield is soldered to PCB RF ground plane.
c. Room ambient temperature.
d. Terminals not tested were terminated with 50-ohm load.
e. Contact signal level: –10 dBm.
f. No. of test samples: 2.
Data presented herein represents typical characteristics and is not intended for use as specification limits.
Data is per pole, except for pole-to-pole data.
Data is the average from readings taken on all open contacts.
Data is the average from readings taken on poles with coil energized and de-energized.
Data is the average from readings taken on all closed contacts.
Test fixture effect de-embedded from frequency and time response data.
1. Test conditions:
2.
3.
4.
5.
6.
7.
SGRF300/SGRF303 Page 2
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2007 TELEDYNE RELAYS
SGRF300SGRF303\052007\Q1
SERIES SGRF300 AND SGRF303
GENERAL ELECTRICAL SPECIFICATIONS (@25°C unless otherwise noted) (Notes 2 & 3)
Contact Arrangement
2 Form C (DPDT)
Rated Duty
Continuous
Contact Resistance
0.15 7 max.
Contact Load Rating
Resistive: 1Amp/28Vdc
Low level: 10 to 50 MA @ 10 to 50 mV
Contact Life Ratings
10,000,000 cycles (typical) at low level
Coil Operating Power
SGRF300-5: 500 mW typical @ nominal rated voltage
SGRF300-12: 370 mW typical @ nominal rated voltage
SGRF303-5: 250 mW typical @ nominal rated voltage
SGRF303-12: 169 mW typical @ nominal rated voltage
Operate Time
SGRF300: 4.0 mS max.
SGRF303: 6.0 mS max.
Release Time
SGRF300: 3.0 mS max.
SGRF303: 3.0 mS max.
Intercontact Capacitance
0.4 pf typical
Insulation Resistance
1,000 M7 min. between mutually isolated terminals
Dielectric Strength
350 Vrms (60 Hz) @ atmospheric pressure
DETAILED ELECTRICAL SPECIFICATIONS (@25°C)
BASE PART NUMBERS
SGRF300-5/SGRF303-5
SGRF300-12/SGRF303-12
Coil Voltage, Nominal (Vdc)
Coil Resistance (Ohms ±20%)
5.0
12.0
SGRF300
50
390
SGRF303
100
850
3.6
9.0
Pick-up Voltage (Vdc max.)
GENERAL NOTES
1. Relays will exhibit
no contact chatter in
excess of 10 μsec or
transfer in excess of 1
μsec.
2. Unless otherwise
specified, parameters
are initial values.
3. Relays may be
subjected to 260°C,
peak solder reflow
temperature, 1 minute, 3
passes.
4. Butt-lead ends are
coplanar within
.003" (0.08).
5. Application notes
available for PCB
layout and mounting
information.
6. Add "/R" to end of part
number for RoHS
compliant solder coated
pins (Sn99.3/Cu0.7).
OUTLINE DIMENSIONS
Ø .335 MAX
(8.51)
SRGF303
.440 MAX
(11.18)
SRGF300
.340 MAX
(8.64)
.370 MAX
(9.4)
.031 REF
(0.79)
.063 REF
(1.6)
+.002
(8) LEADS
.035 REF
(0.89)
9
Ø .200 ±.010
(5.08 ±0.254)
+.030
4X .397 –.020
Ø.017 –.001
+0.05
(0.43 –0.025
)
1
8
2
7
3
36° ±3° TYP
(10.08 +0.76
–0.51 )
6
4
SCHEMATIC – TERMINAL VIEW
Pin numbers for reference only;
not marked on display
NOTES
1. Dimensions are in inches. Metric equivalents shown in parentheses.
2. For best RF performance, solder bottom of RF ground shield to PCB RF ground plane.
© 2007 TELEDYNE RELAYS
BEFORE
LASER WELD
(800) 284-7007 • www.teledynerelays.com
RF GROUND
SHIELD
(SEE NOTE 2)
U.S. PATENT PENDING
SGRF300/SGRF303 Page 3
SGRF300SGRF303\052007\Q1
Appendix A: Spacer Pads
Pad designation and
bottom view dimensions
Height
Ø.150
[3.81]
(REF)
Dim H
MAX
“M4” Pad for TO-5
Dim H
MAX
“M4” Pad for TO-5
Dim H
MAX
“M4” Pad for Centigrid®
.156
[3.96]
(REF)
Dim H
MAX
.256
[6.5]
(REF)
“M9” Pad for Centigrid®
For use with the following:
ER411T
ER412, ER412D, ER412DD
712, 712D, 712TN,
RF300, RF310, RF320
ER420, ER422D, ER420DD, 421,
ER421D, ER421DD, ER422, ER422D,
ER422DD, 722, 722D, RF341
ER431T, ER432T,
ER432, ER432D, ER432DD
732, 732D, 732TN, RF303, RF313,
RF323
.295 (7.49)
.300 (7.62)
.305 (7.75)
.400 (10.16)
.410 (10.41)
RF312
.350 (8.89)
ER411, ER411D, ER411DD
.295 (7.49)
ER431, ER431D, ER431DD
.400 (10.16)
RF311
.300 (7.62)
RF331
.410 (10.41)
172, 172D
.305 (7.75)
ER114, ER114D, ER114DD,
J114, J114D, J114DD
.300 (7.62)
ER134, ER134D, ER134DD,
J134, J134D, J134DD
.400 (10.16)
RF100
.315 (8.00)
RF103
.420 (10.67)
122C, A152
.320 (8.13)
ER116C, J116C
.300 (7.62)
ER136C, J136C
.400 (10.16)
RF180
.325 (8.25)
A150
.305 (7.75)
Notes:
1. Spacer pad material: Polyester lm.
2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering
example in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise specied, tolerance is ± .010 (.25).
5. Add 10 m to the contact resistance show in the datasheet.
6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
© 2008 Teledyne Relays
Dim. H
Max.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Appendix A: Spreader Pads
Pad designation and
bottom view dimensions
Height
For use with the following:
.370 [9.4]
MAX SQ
.100
[2.54]
Dim H
MAX
.150
[3.81]
.014
[0.36]
(REF)
.300
[7.62]
.100
[2.54]
.370
[9.4]
MIN
.200
[5.08]
“M” Pad 5/ 6/
.390 [9.91]
SQ
.100
[2.54]
.100
[2.54]
.150
[3.81]
.300
[7.62]
.300
[7.62]
.150
[3.81]
Dim H
MAX
ER411T, J411T, ER412, ER412D
ER412DD, J412, J412D, J412DD
ER412T, J412T
712, 712D, 712TN
ER431T, J431T, ER432, ER432D
ER432DD, J432, J432D, J432DD
ER432T, J432T
732, 732D, 732TN
.370 [9.4]
MAX SQ
.100
[2.54]
Dim H
MAX
.150
[3.81]
.014
[0.36]
(REF)
.300
[7.62]
.100
[2.54]
.200
[5.08]
.370
[9.4]
MIN
“M3” Pad 5/ 6/ 9/
.393 (9.99)
.493 (12.52)
.503 (12.78)
.398 (10.11)
ER411T
ER412, ER412D, ER412DD
J412, J412D, J412DD
.441 (11.20)
732, 732D
“M2” Pad 7/ 8/
.388 (9.86)
ER420, J420, ER420D, J420D
ER420DD, J420DD, ER421, J421
ER421D, J421D, ER421DD
J422D, ER422DD, J422DD, 722
712, 712D
ER421, ER421D, ER421DD
722, 732D
ER431T
ER432, ER432D, ER432DD
.130
[3.3]
Dim. H
Max.
ER411, ER411D, ER411DD
ER411TX
ER412X, ER412DX, ER412DDX
ER412TX
712X, 712DX, 712TNX
ER420X, ER420DX, ER420DDX
ER421X, ER421DX, ER421DDX
ER422X, ER422DX
ER422DDX, 722X, 722DDX
ER431, ER431D, ER431DD
ER431TX
ER432X, ER432DX, ER432DDX
ER432TX
732X, 732DX, 732TNX
.451 (11.46)
.451 (11.46)
.546 (13.87)
.556 (14.12)
.388 (9.86)
.393 (9.99)
.398 (10.11)
.493 (12.52)
.503 (12.78)
Notes:
1. Spreader pad material: Diallyl Phthalate.
2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example
in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise specied, tolerance is ± .010” (0.25).
5/. Add 25 m to the contact resistance shown in the datasheet.
6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
7/. Add 50 m to the contact resistance shown in the datasheet.
8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.
9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)
(800) 284-7007 • www.teledynerelays.com
+44 (0) 1236 453124 • www.teledyne-europe.com
© 2008 Teledyne Relays
Appendix A: Ground Pin Positions
Ø.200
[Ø5.08]
36°±3°
"Z"
POSITION
"X"
POSITION
"Y"
POSITION
"Z"
Ø.200
[Ø5.08]
"Y"
45°±3°
TO-5 Relays:
ER411T, ER412, ER412T, ER420, ER421, ER422,
ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,
400V, RF300, RF303, RF341, RF312, RF310, RF313,
RF320, RF323
"Y"
POSITION
POSITION
TO-5 Relays:
ER411, ER431, RF311, RF331
POSITION
.100
[2.54]
"W"
"Z"
.100
[2.54]
.050
[1.27]
"X"
.100
[2.54]
POSITION
POSITION
"Z"
POSITION
POSITION
.100
[2.54]
POSITION
"U"
POSITION
(ER116C and ER136C only)
Centigrid® Relays:
RF180, ER116C, 122C, ER136C
.100
[2.54]
Centigrid® Relays:
RF100, RF103, ER114, ER134, 172
Indicates ground pin position
Indicates glass insulated lead position
Indicates ground pin or lead position
depending on relay type
© 2008 Teledyne Relays
"Y"
.100
[2.54]
NOTES
1. Terminal views shown
2. Dimensions are in inches (mm)
3. Tolerances: ± .010 (±.25) unless otherwise specied
4. Ground pin positions are within .015 (0.38) dia. of true position
5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.
6. Lead dia. 0.017 (0.43) nom.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE