MX-170 Oven Controlled Crystal Oscillator MX -170 MX-170 Features Applications • Ultra-High Stability • Excellent Temperature Stability • SC-Cut Crystal • Frequency Range: 5 MHZ to 15 MHZ • Low Package Height • CDMA2000, WiMax, LTE and UMTS Base Stations • Test and Measurement Equipment • Broadcast Reference Standard Performance Specifications Frequency Stabilities1 Parameter vs. operating temperature range (referenced to +25°C) Min Typ Max Units Condition -0.4 -0.5 -0.6 -0.7 -0.8 1 +0.4 +0.5 +0.6 +0.7 +0.8 1 ppb ppb ppb ppb ppb ppb 0… +70°C (height code 1 only) 0… +70°C (height code 0,1) -20… +70°C (height code 1 only) -20… +70°C (height code 0,1) -40… +85°C ( 5V supply, height code 1 only) -40… +85°C(5 V supply, height code 0,1) 5 minutes to ± 10 ppb of final frequency (1 hour) @25°C -50 -0.5 -0.1 -0.5 -0.1 -20 -10 +50 +0.5 +0.1 +0.5 +0.1 +20 +10 ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ± 5% Load ± 5% after 72 hours of operation after 7 days after 72 hours of operation Warm-up Time Initial Tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / day vs. aging / 1 year vs. aging / year (following years) Supply Voltage (Vs) Supply voltage (Standard) 4.75 5.0 5.25 VDC Supply voltage (Option) 11.4 12.0 12.6 VDC Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Frequency Stabilities1 Parameter Min Typ Power consumption @+5V Power consumption @+12V Max Units Condition 4 Watts during warm-up 2 Watts steady state @ +25°C 4 Watts during warm-up 2 Watts steady state @ +25°C RF Output Signal [Option] HCMOS 15 Load pF Signal Level (Vol) 0.5 Signal Level (Voh) 3.5 Duty cycle 45 55 VDC with 15pF load VDC with 15pF load % (Voh-Vol)/2 Sinewave Signal [Standard] 50 Load +5.0 +9.0 dBm 50 Ohm load Harmonics -40 dBc 50 Ohm load Sub-Harmonics -40 dBc 50 Ohm load Output Power +7.0 ohm Frequency Tuning (EFC) Tuning Range ±0.15 ±0.2 Linearity Control Voltage Range 0 +2.5 ±0.25 ppm 5 % +5.0 VDC Positive Tuning Slope Additional Parameters Phase Noise @ 10 MHz -95 dBc/Hz 1 Hz -125 dBc/Hz 10 Hz -140 dBc/Hz 100 Hz -145 dBc/Hz 1 KHz -145 dBc/Hz >10 KHz Short Term Stability 3 e-12 1 second tau Weight 55 g Processing & Packing Handling & processing note Absolute Maximum Ratings Supply Voltage 15 VDC Output Load 50 25 pF ohm Operable temperature range -55 +85 °C Storage temperature range -55 +125 °C with HCMOS signal with Sinewave signal Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Dimensions in mm Type A Code Height “H” Pin Length “L” 0 15 6.35 1 19 6.35 Pin Connections 1 Electronic Frequency Control (EFC) 2 N/C 3 Supply Voltage 4 RF output 5 Ground (Case) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information MX - 170 0 - D A J - 400 1 - 10M0000000 Frequency Product Family MX: OCXO Frequency Control 0: Fixed Frequency (No EFC) 1: Electrical Tuning (EFC) Package 36 x 27 mm Height 0: 15mm 1: 19 mm Stability Code 109:±1 ppb (temp code E, height code 0,1) 800: ±0.8ppb (temp code E, height code 1) 700: ±0.7ppb (temp code J, height code 0,1) 600: ±0.6ppb (temp code J, height code 1) 500: ±0.5ppb (temp code T, height code 0,1) 400: ±0.4ppb (temp code T, height code 1) Supply Voltage B: 12 Vdc D: 5 Vdc RF Output Code A: HCMOS E: Sinewave Temperature Range E: -40°C to +85°C (Supply Voltage D only) J: -20°C to +70°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road, Suite 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2-14-2014 jar Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com