OX-405 Oven Controlled Crystal Oscillator OX-405 Features Applications • 4-Pin Dip • Fast Warm-up • Frequency Range: 80 MHZ to 120 MHZ • Low g-sensitivity • Low Phase Noise • Base Stations • Test Equipment • Synthesizers • Military Communication Equipment Performance Specifications Frequency Stabilities1 (SC-Cut Crystal-Option) Parameter Min vs. operating temperature range (referenced to +25°C) Initial tolerance vs. supply voltage change vs. load change vs. aging/day vs. aging/1st year Warm-up time Typical Max Unit Condition -200 -150 -100 -50 -35 -25 +200 +150 +100 +50 +35 +25 ppb ppb ppb ppb ppb ppb -40 to +85°C -20 to +70°C -0 to +70°C -40 to +85°C (height code 0 and 3 only) -20 to +70°C (height code 0 and 3 only) -0 to +70°C (height code 0 and 3 only) -0.2 -50 -25 -10 -3 -300 +0.2 +50 +25 +10 +3 +300 ppm ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ±5% static (CMOS outputs) VS ±5% static (sine outputs) Load ±5% static after 30 days of operation after 30 days of operation 2 minutes to ±100ppb of final frequency (1 hour reading) @ +25°C Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Supply Voltage (Vs) Parameter Supply Voltage Min Typical Max Unit 4.75 5.0 5.25 VDC 3.165 3.3 3.465 VDC 3.5 4.5 1.0 Watts Watts Watts Power Consumption Condition during warm-up (5V versions) during warn-up (3V version) steady state @ +25°C RF Output Signal [Standard] HCMOS Load 15 pF Signal Level (Vol) 0.5 Signal Level (Voh) 4.7 Signal Level (Vol) 0.3 Signal Level (Voh) 3.0 Duty Cycle 40 VDC with Vs=5V and 15 pF Load VDC with Vs=5V and 15 pF Load VDC with Vs=3.3V and 15 pF Load VDC with Vs=3.3V and 15 pF Load % @ (Voh-Vol)/2 60 Sinewave (5V supply, height code 0 or 3 only) Load W 50 Output Power @ 5V 5 8 Harmonics 11 dBm -40 dBm 50 W load Frequency Tuning (EFC) Tuning Range ±1.0 ±3.0 ppm 5 % 2.0 4.0 VDC 5 V versions 1.5 3.0 VDC 3.3 V versions Linearity Tuning Slope Positive Control Voltage Range 0.0 0 Additional Parameters Phase Noise3 G-Sensitivity Weight -95 -125 -145 -155 -160 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 0.5 ppb/g ppb/g 8 g 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 100MHz worst direction - standard worst direction - request a custom part Absolute Maximum Ratings Supply Voltage (Vs) 6.0 V Output Load 50 pF +85 °C Operable Temperature Range -55 Environmental and Product Classification Shock (Endurance) MIL-STD-202, Method 213, Condition J, 30 g 11 ms Sine Vibration (Endurance) MIL-STD-202, Method 201 and 204, Condition A, except 5 g to 500 Hz, 1 sweep each axis Random Vibration (Endurance) MIL-STD-202, Method 214, Condition I-D Humidity MIL-STD-202, Method 103, Condition B, 100% rh Seal MIL-STD-202, Method 112, Condition D Altitude MIL-STD-202, Method 105, sea level to space Resistance to Soldering Heat MIL-STD-202, Method 210, Condition A,B,C Terminal Strength MIL-STD-202, Method 11, Condition C (5 bends at 45o, 2 lbs) Moisture Sensitivity level 1 ROHS Compliantt Yes Storage Temperature Range -55 +125 °C Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Outline Drawing / Enclosure Dimensions in inches (mm) Dimensions in mm Type A Type B Code Height “H” Pin Length “L” Min Code Height “H” Pin Length “L” Min 0 9.3 5.85 2 10.4 NA 1 8.3 5.85 3 11.4 NA Pin Connections Pin Connections 1 Electronic Frequency Control Input (EFC) 1 Electronic Frequency Control Input (EFC) 7 Ground (Case) 7 Ground (Case) 8 RF Output 8 RF Output 14 Supply Voltage Input (VS) 14 Supply Voltage Input (VS) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Standard Shipping Method Enclosure Type Type B Tape width W [mm] 44 Quantity per meter 50 Quantity per reel Dimension P 300 Recommended Reflow Profile Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com 20 Ordering Information OX - 405 0 - D A E - 107 0 - 100M0000000 Frequency Product Family OX: OCXO Frequency Control 0: No Tuning 2: ±1.0 to ±3ppm (SC) Package 405 Height 0: A9.3 mm (THT) 1: A8.3 mm (THT) 2: B10.4 mm (SMD) 3:B11.4mm (SMD) Stability Code 207: ±200ppb 157: ±150ppb 107: ±100ppb 508: ±50ppb (height code 0 and 3 only) 358: ±35ppb (height code 0 and 3 only) 258: ±25ppb (height code 0 and 3 only) Supply Voltage D: +5V E:+3.3V (HCMOS only) RF Output Code A: HCMOS E:Sinewave (height code 0 and 3 only) G Sensitivity - standard parts will be delivered at 1 ppb/g If 0.5ppb/g is requested please contact the factory and a custom part number will be assigned Temperature Range E: -40°C to +85°C J: -20°C to +70°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road, Suite 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2-18-2014 jar Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com