TX-550 - Vectron International

TX-550
Temperature Compensated Crystal Oscillator
TX-550
Description
The TX-550 Series TCXO innovative manufacturing and the latest technology to provide extremely low phase noise and
g-sensitivity. The assembly includes a dual crystal circuit to cancel opposing g-sensitivity vectors.
Features
Applications
• Low Phase Noise, Low G-Sensitivity
• Fully RoHS Compliant
• Surface Mount, Low Profile
• High Shock Survival up 20K g
• Frequency Range: 8 MHZ to 80 MHZ
• Military Portable Radios
• GPS Telemetry
• Test and Measurement Equipment
Performance Specifications
Parameter
Min
Typ
Max
Units
Condition
Frequency Stabilities
1
vs. operating temperature range
(referenced to +25°C)
-2.0
-1.0
-0.5
-0.28
+2.0
+1.0
+0.5
+0.28
ppm
ppm
ppm
ppm
-40… +85°C
-40… +85°C
-20… +70°C
0… +50°C
Initial Tolerance
vs. supply voltage change
vs. load change
vs. aging / 1 year
vs. aging
-1.0
-0.1
-0.2
+1.0
+0.1
+0.2
ppm
ppm
ppm
ppm
ppm
at time of shipment, nominal EFC
Vs ± 5%
Load ± 10%
@ +40°C
for 15 years
±1
4.0
Supply Voltage (Vs)
Supply voltage
4.75
5.0
5.25
VDC
Supply voltage
3.135
3.3
3.465
VDC
Supply voltage
2.7
2.8
2.9
VDC
35
mA
Current consumption
Depends on frequency
RF Output
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Specifications
Parameter
Min
Typ
Max
Units
Condition
HCMOS
Signal
15
Load
pF
0.1*Vs
Signal Level (Vol)
0.9*Vs
Signal Level (Voh)
V
Rise/Fall Time
40
Duty cycle
Signal
V
50
5
ns
@ nominal Load and 10% to 90% of waveform
60
%
@ nominal Load and @ 50% level
with Nominal Load
Clipped Sinewave
Level
1
Vpp
Load R
10
kohm
Load C
10
pF
Frequency Tuning (EFC)
Tuning Range
Fixed; No adjust
±5.0
Tuning Range
ppm
Positive
Tuning Slope
Control Voltage Range
0.0
Freq. control input impedance
10
Vs
VDC
kohm
Additional Parameters1
Phase Noise3 (@ 20 MHz - no vibration)
G-Sensitivity
-90
-120
-140
-145
-150
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
0.2
ppb/g
per axis
Shock
MIL-STD-202G; Method 213B; Test Condition B
Vibration Random
MIL-STD-202G; Method 214A; Test Condition I-F
Vibration Sine
MIL-STD-202G, METHOD 204D, Test Condition A
Thermal Cycling
MIL-STD-202, METHOD 107, Test Condition A
Absolute Maximum Ratings
Supply voltage (Vs)
6.0
V
0
Vs
V
Operable temperature range
-45
+90
°C
Storage temperature range
-55
+105
°C
Control Voltage
Damage will occur beyond this level
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
PhPphase PhaseNoise Plot:
Outline Drawing / Enclosure
T
TX-550 Pin Connections
1
Dimensions in inches (mm)
Electronic Frequency Control (EFC)
2
Ground
3
RF Output
4
Supply
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Ordering Information
TX - 550 0 - D A T - 106
A - 10M0000000
Frequency
Product Family
TX: TCXO
Tuning Option
A: No Tuning
B: Electrical Tuning
Package
9 x 11 mm
Height
0: 0.148”
Stability Code
206: ±2.0ppm
106: ±1.0ppm
507: ±0.5ppm
287: ±0.28ppm
466: ±4.6ppm (Stratum3)
Supply Voltage
D: 5 Vdc
E: 3.3 Vdc
G: 2.8Vdc
RF Output Code
A: HCMOS
F: Sinewave, clipped
Temperature Range
E: -40°C to +85°C
J: -20°C to +70°C
T: 0°C to +70°C
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modification.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Vectron International
267 Lowell Road, Suite 102
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
Asia:
Vectron International
68 Yin Cheng Road(C), 22nd Floor
One LuJiaZui
Pudong, Shanghai 200120, China
Tel: +86 21 6194 6886
Fax: +86 21 6194 6699
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
2-18-2014 jar
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com