DX-170 Oven Controlled Crystal Oscillator DX-170 Features Applications • Ultra-High stability • Excellent temperature stability • SC-Cut crystal • Previous Model: C4605 • Frequency Range: 5 MHZ to 20 MHZ • CDMA2000 and UMTS base stations • Test and Measurement equipment Performance Specifications Frequency Stabilities1 (SC-Cut Crystal) Parameter Min Max Units Condition vs. operating temperature range (referenced to +25°C) -0.4 -0.2 -0.4 Typical +0.4 +0.2 +0.4 ppb ppb ppb 0 to +70°C 0 to +70°C -20 to +70°C Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 day vs. aging / 1 day vs. aging / 1 year -100 -0.2 -0.2 -0.5 -0.2 -25 +100 +0.2 +0.2 +0.5 +0.2 +25 ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ±5% Load ±5% after 72 hours of operation after 7 days of operation after 7 days of operation 5 minutes to ±10ppb of final frequency (1 hour reading) @ +25°C Warm-up time Supply Voltage (Vs) Supply voltage 11.4 12.0 12.6 Supply voltage 4.75 5.0 5.25 VDC 9 Watts during warm-up 3 Watts steady state @ +25°C Power Consumption VDC Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications RF Output Parameter Min Typical Signal [Option] Max Units Condition HCMOS Load 15 pF Signal Level (Vol) 0.5 VDC 15 pF Load, 12 V supply Signal Level (Vol) 0.3 VDC 15 pF Load, 5V supply Signal Level (Voh) 2.8 VDC 15 pF Load,12 V supply Signal Level (Voh) 4.5 VDC 15 pF Load, 5V supply Duty Cycle 45 % @ (Voh-Vol)/2 55 Signal [Standard] Sinewave Load 50 Output Power +5.0 +7.0 Ohms +9.0 dBm 50 Ohm load -30 dBc 50 Ohm load Harmonics Frequency Tuning (EFC) Tuning Range ±0.25 ±0.5 ±0.75 ppm 20 % 5.0 VDC Linearity Tuning Slope Positive Control Voltage Range 0.0 2.5 Additional Parameters Phase Noise Weight -90 -120 -135 -140 -140 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 50 g 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz @ 10MHz Absolute Maximum Ratings supply voltage (Vs) 15 7 V V with 12V supply with 5V supply Output Load 50 25 pF Ohm with HCMOS signal with Sinewave signal Operable Temperature Range -55 +85 °C Storage Temperature Range -55 +125 °C Outline Drawing / Enclosure Dimensions in inches (mm) Type A Code Height “H” Pin Length “L” 0 19.00 5.00 Pin Connections 1 Electronic Frequency Control Input (EFC) 2 No Connect 3 Supply Voltage Input (Vs) 4 RF Output 5 Ground (Case) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information DX - 170 0 - B A J - 400 1 - 10M0000000 Frequency Product Family DX: DOCXO Frequency Control 1: ±0.25 to ±0.75ppm Package 25x38mm Height 0: A19.00mm Stability Code 400: ±0.4ppb 200: ±0.2ppb Supply Voltage B: +12V D: +5V Temperature Range J: -20°C to +70°C T: 0°C to +70°C RF Output Code A: HCMOS E: Sinewave Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2-17-12 dmc Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com