TX-400 Temperature Compensated Crystal Oscillator TX-400 Features Applications • EFC Standard • Hermetic • Wide Frequency Range • Frequency Range: 2 MHZ to 200 MHZ • Previous Model: C2400, TQDILTC; 979; 979W, 959; 959W, TC-400 • PCS Base Stations • Land Mobile Radio • Cellular Telephony • Radio in the Local Loop Performance Specifications Parameter Min Typ Max Units Condition Frequency Stabilities 1 vs. operating temperature range (referenced to +25°C) -2.5 -2 -1.5 -1.0 -2.0 -1.5 -1.0 -1.5 -1.0 -1.5 -1.0 -0.5 +2.5 +2.0 +1.5 +1.0 +2.0 +1.5 +1.0 +1.5 +1.0 +1.5 +1.0 +0.5 ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm -40… +85°C -40… +85°C -40… +85°C -40… +85°C -20… +70°C -20… +70°C -20… +70°C 0… +70°C 0… +70°C 0… +50°C 0… +50°C 0… +50°C Initial Tolerance vs. supply voltage change vs. load change vs. aging -2.5 -0.2 -0.2 +2.5 +0.2 +0.2 ppm ppm ppm ppm/yr at time of shipment, nominal EFC Vs ± 5% Load ± 10% 1.0 Supply Voltage (Vs) Supply voltage 3.135 3.3 3.465 VDC Supply voltage 4.75 5.0 5.25 VDC 15 50 18 50 mA mA mA mA Current consumption @ +25°C & 3.3VDC & clipped sinewave @ +25°C & 3.3VDC & CMOS @ +25°C & 5.0VDC & clipped sinewave @ +25°C & 5.0VDC & CMOS Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Parameter Min Typ Max Units Condition RF Output HCMOS Signal 13.5 Load 15 Signal Level (Vol) Signal Level (Voh) 4.5 3.0 Duty cycle 40 50 16.5 pF +0.5 +0.3 V with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load V with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load % @ (Voh-Vol)/2 60 Clipped Sinewave Signal Load R 9 10 11 kohm || C 9 10 11 pF 0.7 Output Power Vpp Signal @ 10Kohm||10pF PECL 50 Load ohm -1.6 Signal Level (Vol) -1.04 Signal Level (Voh) V 40 Duty cycle V Rise/Fall Time 60 % 3 ns Sinewave Signal Load 50 ohm 6 dBm Harmonics -20 dBc Spurious -60 dBc Output Power 0 Frequency Tuning (EFC) Tuning Range Fixed Frequency Tuning Range ±8.0 ±12.0 Linearity Initial Accuracy ±2.5 ppm @ +25°C ±20.0 ppm 10 % Positive Tuning Slope Control Voltage Range 0.3 0.5 Freq. control input impedance 10 1.65 2.5 3.0 4.5 VDC VDC with Vs=3.3VDC with Vs=5.0VDC kohm Additional Parameters1 Phase Noise3 (@ 40 MHz) Weight -90 -120 -140 -150 dBc/Hz dBc/Hz dBc/Hz dBc/Hz 6.0 g Processing & Packing 10 Hz 100 Hz 1 kHz 10 kHz Handling & processing note Absolute Maximum Ratings Supply voltage (Vs) Control Voltage 0 Maximum output load @ CMOS 6.0 V Vs V 50 pF Operable temperature range -40 +85 °C Storage temperature range -55 +125 °C Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P Type B 44 50 300 20 Type C 44 50 300 20 Recommended Reflow Profile Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Dimensions in mm Dimensions in mm Dimensions in inches Type B Type A Code Height “H” Pin Length “L” Code 0 7.5 5.85 3 1 8.0 5.85 2 10.1 5.85 Type C Height “H” Pin Length “L” Code Height “H” Pin Length “L” 9.4 NA 4 0.45 NA 20,7max. G 125 15,24 ±0,3 13,1max. 8 5,85min. ø0,45 2,3 0,8max. H 14 7,62 ±0,3 7 1 4,58 ±0,5 12,2 H = 7,5max.; ±0,5 Pin Connections 1 Electronic Frequency Control (EFC) 7 Ground (Case) 8 RF Output 14 Supply Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information TX - 400 0 - D A J - 206 0 - 10M0000000 Frequency Product Family TX: TCXO Tuning Option 0: No Tuning (Fixed Frequency) 1: Electrical Frequency Adjust (EFC) Package 13 x 20 mm Height 0: A 7.5mm 1: A 8.0mm 2: A 10.1mm 3: B 9.4mm 4: C 0.45” Stability Code 256: ±2.5ppm 206: ±2.0ppm 156: ±1.5ppm 106: ±1.0ppm 507: ±0.5ppm Supply Voltage D: 5 Vdc E: 3.3 Vdc RF Output Code A: HCMOS C: PECL E: Sinewave F: Sinewave, clipped Temperature Range E: -40°C to +85°C J: -20°C to +70°C T: 0°C to +70°C P: 0°C to +50°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 5/27/2009 daf Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com