VX-504 Voltage Controlled Crystal Oscillator VX-504 Features Applications • AT-Cut Crystal • Surface Mount FR4 based package • Low Phase Noise • Low G-Sensitivity • Tight Stabilities • Frequency Range 30 - 160MHz • Standard Frequencies 32,768; 38,4; 44.8; 61.44; 76.8; 81.92; 92.16;100; 102.4; 112; 122.88; 125; 134.4; 153.6; 155.52; 160MHz • • • • • Wireless Communication Test & Measurement Harsh Environment Industrial Military Performance Specifications Frequency Stabilities1 Parameter Min vs. operating temperature range (referenced to +25°C) Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 Year vs. aging (15 years) Typical Max Units -30 +30 ppm -15 -3 -2 -2 -7 +15 +3 +2 +2 +7 ppm ppm ppm ppm ppm Condition2 -40 to +85°C @Vc=Vs/2 VS ±5% Load ±10% Page 1 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Supply Voltage (Vs) Supply voltage (standard) Min Typical Max Units 3.135 3.3 3.465 VDC 25 mA 4.75 5 5.25 VDC 20 mA Current consumption Supply voltage Current consumption Condition2 Options5 Parameter @ HCMOS @ HCMOS RF Output HCMOS Load 15 pF Rise and Fall time Duty cycle 40 5 ns @ 15 pF 10 to 90% 60 % @ Vs / 2 Options5 Signal Frequency Tuning (EFC) Tuning Range ±65.0 ±80 Linearity ppm ±180.0 10 % Tuning Slope Positive Control Voltage Range 0 0.5 Frequency Control Input Impedance 100 1.65 2.5 3.3 4.5 VDC VDC with Vs = 3.3V with Vs = 5V kΩ Additional Parameters Phase Noise Jitter G-Sensitivity -72 -103 -130 -150 -161 0.06 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz 0.3 ppb/g @0.06g²/Hz Additional Parameters Weight 2.0 g Processing & Packing Handling & Processing Note Absolute Maximum Ratings Supply voltage (Vs) 6.0 V Operable Temperature Range -40 +85 °C Storage Temperature Range -40 +105 °C Page 2 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com @122MHz LVCMOS 3.3V Performance Cross Reference Specifi cations Typical NoiseList and Jitter CrossPhase Reference List Phase Noise VX-504 @ 122.88 MHz LVCMOS G-Sensitivity VX-504 @ 122.88 MHz LVCMOS Page 3 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Enclosure Package Codes Type Height “H” G218C 2.8 Pin Connections 1 Control Voltage (Vc) 2 N.C. / Enable (Option) 3 Ground 4 RF Output 5 N.C. 6 Supply Voltage Input (Vs) Marking Enable true table (optional) VX-504-xxxx HCMOS Frequency Pin 2 Pin 4 Pin 5 AYYWW High Data N.C. Open Data N.C. Low High Tristate N.C. Page 4 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtun Unwinding direc X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W mm nur untere Lochreihe by W 24 mm only lower hole line Enclosure Type Tape Width W (mm) Quantity per meter Quantity per reel Dimension P G218C 24 83.3 1700 12 Recommended Reflow Profile Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Average ramp-up rate (TL to TP) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. 150°C 200°C 60-180 seconds Time maintained above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Preheat -Temperature Min TSmin -Temperature Min TSmax -Time (min to max) tS TSmax to TL -Ramp-up Rate 3°C/second max Time maintained above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Time within 5°C of actual Peak Temperature (tP) 20-40 seconds Peak Temperature (TP) max 260°C Ramp-down Rate 6°C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. Page 5 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information VX-504 0 - E A E - 305 0 - 100M0 Frequency Model Code Enable 0: No Enable 1: Enable Height 0: 2.8 mm (G218C) Stability Code E-305: ±30ppm Supply Voltage D: 5V E: 3.3V RF Output Code A: HCMOS Temperature Range E: -40°C to +85°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road, Unit 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268-801-0 Fax: +49 (0) 7268-801-281 Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 5/2015 Page 6 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com