VECTRON TX-5080-EAP-2560

TX-508
Temperature Compensated Crystal Oscillator
Low G-Sensitivity
TX-508
Features
Applications
Low G-Sensitivity
Vibration hardened
Tight Tolerances
Low Phase Noise
• Vibration Environment
• Portable Equipment
• Land Mobile Radio
Performance Specifications2
Frequency Stabilities1 (Standard Frequency range - 10 to 100 MHz)
Min
vs. operating temperature range
(referenced to +25°C)
Initial tolerance
vs. supply voltage change
vs. load change
vs. aging / 1 year
vs. aging / 10 year
Typical
Max
Units
-2.5
-1.0
-2.5
-1.0
-1.0
-0.5
+2.5
+1.0
+2.5
+1.0
+1.0
+0.5
ppm
ppm
ppm
ppm
ppm
ppm
-1.5
-0.3
-0.2
-1.0
-2.5
+1.5
+0.3
+0.2
+1.0
+2.5
ppm
ppm
ppm
ppm
ppm
Condition
-40 to +85°C
-40 to +85°C
-20 to +70°C
-20 to +70°C
-0 to +50°C
-0 to +50°C
Options4
Parameter
at time of shipment, nominal EFC, 25°C
VS ±5% static
Load ±10% static
after 30 days of operation
after 30 days of operation
Frequency Stabilities1 (Stratum 3 TCXO Frequency range - 10 to 100 MHz)
vs. operating temperature range
(referenced to +25°C)
-0.8
-0.8
-0.28
-0.28
+0.8
+0.8
+0.28
+0.28
ppm
ppm
ppm
ppm
Initial tolerance
vs. supply voltage change
vs. load change
vs. aging / 20 years
overall tolerance
-1.0
-0.3
-0.1
-2.5
-4.6
+1.0
+0.3
+0.1
+2.5
+4.6
ppm
ppm
ppm
ppm
ppm
-40 to +85°C
-20 to +70°C
-20 to +70°C
-0 to +50°C
Options4
•
•
•
•
at time of shipment, nominal EFC, 25°C
VS ±5% static
Load ±10% static
after 30 days of operation
Note:
* Stratum 3 per GR-1244-CORE:
<±4.6 ppm for all causes and
20 Years aging,
Holdover: <±0.37 ppm over 24 hours
Page 1 of 6
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Specifications2
Supply Voltage (Vs)
Min
Typical
Max
Units
Condition
Supply voltage (standard)
Current consumption
3.135
3.3
3.465
30
VDC
mA
@LVCMOS
Supply voltage
Current consumption
4.75
5.0
5.25
40
VDC
mA
@HCMOS
Option4
Parameter
RF Output
Signal [standard]
LVCMOS/HCMOS
Load
13.5
15
Signal Level (Vol) LVCMOS
Signal Level (Voh) LVCMOS
16.5
pF
0.3
VDC
@ Vs=3.3V and 15pF Load
VDC
@ Vs=3.3V and 15pF Load
VDC
@ Vs=5.0V and 15pF Load
3.0
Signal Level (Vol) HCMOS
0.5
Signal Level (Voh) HCMOS
4.5
Duty Cycle
40
@ Vs=5.0V and 15pF Load
Rise and Fall time
60
%
@ (Voh-Vol)/2
5
ns
@15 pF 10 to 90 %
Tuning Range
Fixed TCXO; No adjust
±5.0
±8.0
Tuning Range
±12
±14
Linearity
±20
±20
ppm
ppm
S3 Version
Standard Version
Option4
Frequency Control (EFC)
<10%
Tuning Slope
Positive
Control Voltage Range
0.3
1.65
3.0
VDC
@ Vs=3.3V
Control Voltage Range
0.5
2.5
4.5
VDC
@ Vs=5.0V
Frequency control input impedance
10
kOhm
Additional Parameters
Phase Noise3
-95
-123
-143
-152
-155
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
Jitter
1.14
ps RMS
@ 12 kHz to 20 MHz
Phase Noise3
-74
-103
-134
-152
-160
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
Jitter
0.073
ps RMS
@ 12 kHz to 20 MHz
Weight
8.0
Processing & Packing
@ 10 MHz
LVCMOS
3.3 V
@ 100 MHz
LVCMOS
3.3 V
g
Handling & Processing Note
Additional Environmental Conditions
Random Vibration
MIL-STD-202G; Method 214A; Condition II-J
1g2/Hz / 43.92 grms guaranteed
(Qualification testing performed at MIL-STD-202G;
Method 214A; Condition II-K, 1.5g2/Hz / 53.79 grms)
MIL-STD-883; Method 2007
Test Condition B 50 g
(Qualification testing performed at MIL-STD-883;
Method 2007; Test Condition C 70)
MIL-STD-202G; Method 213B; Condition E
1000 g / 0.5 ms
higher values on request
Sine Vibration
Shock
Absolute Maximum Ratings
supply voltage (Vs)
6.0
V
Output Load
50
pF
Operable Temperature Range
-40
+85
°C
Storage Temperature Range
-55
+105
°C
Page 2 of 6
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Outline Drawing / Enclosure
TX-508
Height “H”
Pin Length “L”
6.2
NA
Pin Connections
1
N/C
2
NC / Control Voltage Input (Vc)
3
N/C / Enable (optional)
4
Ground (Case)
5
NC
6
NC
7
RF-Output
8
NC
9
Supply Voltage (Vs)
10
NC
Enable true table (optional)
Pin 3
Pin 7
High
Data
Open
Data
Low
High Tristate
Dimensions in mm
Typical Phase Noise @ 100 MHz HCMOS
Typical Phasenoise: TX-508 @ 100MHz
-60
-70
-80
Phase Noise [dBc/Hz]
-90
-100
-110
-120
-130
-140
-150
-160
-170
10
100
1000
10000
100000
Offset Frequency [Hz]
Page 3 of 6
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
1000000
Typical G-Sensitivity @10 MHz; HCMOS
Vibration spectrum
G-Sensitivity: TX-508; 10 MHz; 0,06g2/Hz
1,00
0,1
X-Axis
0,80
Y-Axis
Z-Axis
0,70
Total
PSD [g /Hz]
0,60
0,01
2
G-Sensitivity [ppb/g]
0,90
0,50
0,40
0,001
0,30
0,20
0,10
0,0001
0,00
10
100
1.000
10.000
10
100
1.000
Frequency [Hz]
Frequency [Hz]
Phase noise: TX-508; 10 MHz; 0,06g2/Hz
Calculation equation according to Vig-Tutorial
Phase Noise [dBc/Hz]
-50
g-sensitivity:
-60
X-Axis
Y-Axis
-70
Z-Axis
Peak g-level:
-80
2 ⋅ fv
G=
⋅10
Apeak ⋅ f 0
L ( fv )
20
Apeak = PSD ⋅ 2
-90
Oscillator
Z
-100
Y
-110
X
-120
-130
-140
10
100
1.000
10.000
Offset Frequency [Hz]
Page 4 of 6
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
10.000
Standard Shipping Method (TX-508)
Lage im Gurt
Position in tape
Pin 1
A
Abwickelrichtung
Unwinding direction
X
B
Gurtunterseite
Tape buttom side
K
P
Gurtoberseite
Tape upper side
*bei W ≤ 24 mm nur untere Lochreihe
∗by W ≤ 24 mm only lower hole line
Enclosure Type
Tape Width W (mm)
Quantity per meter
Quantity per reel
Dimension P
G301
24
83,3
850
12
Recommended Reflow Profile
Profile Feature
Pb-Free Assembly/
Sn-Pb Assembly
Profile Feature
Pb-Free Assembly/
Sn-Pb Assembly
Average ramp-up rate (TL to TP)
3°C/second max.
Time 25°C to Peak Temperature
8 minutes max.
150°C
200°C
60-180 seconds
Time maintained above
-Temperature (TL)
-Time (tL)
217°C
60-150 seconds
Preheat
-Temperature Min TSmin
-Temperature Min TSmax
-Time (min to max) tS
TSmax to TL -Ramp-up Rate
3°C/second max
Time maintained above
-Temperature (TL)
-Time (tL)
217°C
60-150 seconds
Time within 5°C of actual Peak
Temperature (tP)
20-40 seconds
Peak Temperature (TP)
max 260°C
Ramp-down Rate
6°C/ second max
Note: All temperatures refer to topside of the package, measured on the package body surface.
Page 5 of 6
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Ordering Information
TX - 508
Product Family
TX: TCXO
0 - E A E - 256 0 - 10M0000000
Frequency
Package
Low G-Sensitivity
SMD version: 508
Frequency Control
0: EFC
1: ±5.0 to ±20ppm
2: ±8.0 to ±20ppm
Height
0: 6.2 mm
Supply Voltage
D: 5V
E: 3.3V
RF Output Code
A: LVCMOS / HCMOS
Stability Code
256: ±2.5 ppm
106: ±1.0 ppm
807: ±0.8 ppm
507: ±0.5 ppm
287: ±0.28 ppm
Temperature Range
P: 0°C to +50°C
J: -20°C to +70°C
H: -30°C to +85°C
E: -40°C to +85°C
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Contact factory for availability.
Subject to technical modification.
For Additional Information, Please Contact
USA:
Europe:
Asia:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 7268.801.100
Fax: +49 (0) 7268.801.282
Vectron International
1589 Century Avenue, the 19th Floor
Chamtime International Financial Center
Shanghai, China
Tel: 86.21.6081.2888
Fax: 86.21.6163.3598
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 10/2010
Page 6 of 6
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com