VECTRON VX

VX-701
Voltage Controlled Crystal Oscillator
VX-701
Features
Applications
• AT-Cut Crystal
• Surface Mount FR4 based package
• Reflow Process Compatible
• Low Phase Noise
• Tight Stabilities
• Frequency Range 1 - 700MHz
• Standard Frequencies 16,384; 30,72; 32,768; 38,88; 52; 77,76;
•
100; 122,88; 153,6; 155,52; 175; 184,32MHz
• Previous Model Number: C5260
• Base Stations
• Test Equipment
• Synthesizers
• Switching
Performance Specifications
Frequency Stabilities1
Parameter
Min
vs. operating temperature range
(referenced to +25°C)
Typical
Max
Units
Condition
-15
+15
ppm
-20 to +70°C
Initial tolerance
vs. supply voltage change
vs. load change
vs. aging / 1 Year
vs. aging (following years)
-10
-3
-1
-3
-1
+10
+3
+1
+3
+1
ppm
ppm
ppm
ppm
ppm
@Vc=Vs/2
VS ±5%
Load ±10%
vs. operating temperature range
(referenced to +25°C)
-30
+30
ppm
-40 to +85°C
Initial tolerance
vs. supply voltage change
vs. load change
vs. aging / 1 Year
vs. aging (following years)
-15
-3
-2
-3
-1
+15
+3
+2
+3
+1
ppm
ppm
ppm
ppm
ppm
@Vc=Vs/2
VS ±5%
Load ±10%
Page 1 of 5
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Specifications
Supply Voltage (Vs)
Min
Typical
Max
Units
3.135
3.3
3.465
VDC
Current consumption
40
mA
@ HCMOS
Current consumption
90
mA
@ PECL, LVDS
5.25
VDC
Current consumption
30
mA
@ HCMOS
Current consumption
80
mA
@ PECL, LVDS
Supply voltage (standard)
Supply voltage
4.75
5
Condition
Options
Parameter
RF Output
Signal
HCMOS
Load
15
pF
Rise and Fall time
Duty cycle
40
ns
@ 15 pF 10 to 90%
60
%
@ Vs / 2
PECL
Load
50
Ω
Rise and Fall time
Duty cycle
45
Signal
Options
Signal
5
1
ns
55
%
20 to 80%
LVDS
Load
100
Ω
Rise and Fall time
Duty cycle
40
1
ns
60
%
10 to 90%
Frequency Tuning (EFC)
Tuning Range ng
±75.0
±140
Linearity
ppm
±200.0
10 %
Tuning Slope
Positive
Control Voltage Range
0
0.5
Frequency Control Input
Impedance
10
1.65
2.5
3.3
4.5
VDC
VDC
with Vs = 3.3V
with Vs = 5V
kΩ
Additional Parameters
Phase Noise
Jitter
Phase Noise
Jitter
Subharmonics
-85
-115
-135
-150
-153
0.2
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ps RMS
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
@ 12kHz .. 20MHz
@52MHz
HCMOS
3.3V
-80
-105
-135
-145
-145
0.6
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ps RMS
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
@ 12kHz .. 20MHz
@ 155.52
MHz
PECL
3.3V
dBc
For >160 MHz only
-40
Weight
2.0 g
Processing & Packing
Handling & Processing Note
Absolute Maximum Ratings
Supply voltage (Vs)
6.0
V
Operable Temperature Range
-40
+85
°C
Storage Temperature Range
-55
+125
°C
Page 2 of 5
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Standard
Cross Reference
Shipping List
Method
Lage im Gurt
Position in tape
Pin 1
A
Abwickelrichtung
Unwinding direction
X
B
P
Gurtunterseite
Tape buttom side
K
Gurtoberseite
Tape upper side
*bei W ≤ 24 mm nur untere Lochreihe
∗by W ≤ 24 mm only lower hole line
Enclosure Type
Tape Width W (mm)
Quantity per meter
Quantity per reel
Dimension P
G284/G283
12
150.
750.
8
Enclosure
Package Codes
Package Codes
Type
Height “H”
Pin Length “L”
Type
Height “H”
G284
2.3
NA
G283
3.0
Pin Connections
Enable true table (optional)
1
Control Voltage (Vc)
HCMOS
LVPECL / LVDS
2
N.C. / Enable (Option)
Pin 2
Pin 4
Pin 5
Pin 4
Pin 5
3
Ground
High
Data
N.C.
No Data
No Data
4
RF Output
Open
Data
N.C.
Data
Compl. Data
5
RF Output complementary (PECL / LVDS)
N.C. (CMOS)
Low
High Tristate
N.C.
Data
Compl. Data
6
Supply Voltage Input (Vs)
Marking
VX-701-xxxx
Frequency
 AYYWW
Page 3 of 5
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Standard Shipping Method
Phase Noise
Phase Noise
VX-701 @ 52 MHz HCMOS
VX-701 @ 155.52 MHz LVPECL
Recommended Reflow Profile
Profile Feature
Pb-Free Assembly/
Sn-Pb Assembly
Profile Feature
Pb-Free Assembly/
Sn-Pb Assembly
Average ramp-up rate (TL to TP)
3°C/second max.
Time 25°C to Peak Temperature
8 minutes max.
150°C
200°C
60-180 seconds
Time maintained above
-Temperature (TL)
-Time (tL)
217°C
60-150 seconds
Preheat
-Temperature Min TSmin
-Temperature Min TSmax
-Time (min to max) tS
TSmax to TL -Ramp-up Rate
3°C/second max
Time maintained above
-Temperature (TL)
-Time (tL)
217°C
60-150 seconds
Time within 5°C of actual Peak
Temperature (tP)
20-40 seconds
Peak Temperature (TP)
max 260°C
Ramp-down Rate
6°C/ second max
Note: All temperatures refer to topside of the package, measured on the package body surface.
Page 4 of 5
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Ordering Information
VX-701 0 - E A J - 105 0 - 52M0000000
Frequency
Model Code
Enable
0: No Enable
1: Enable
Height
0: 2.3mm (G284)
1: 3.0 mm (G283)
Stability Code
E-305: ±30ppm
J-105: ±15ppm
Supply Voltage
D: 5V
E: 3.3V
RF Output Code
A: HCMOS
C: PECL
D: LVDS
Temperature Range
E: -40°C to +85°C
J: -20°C to +70°C
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modification.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 7268-801-0
Fax: +49 (0) 7268-801-281
Asia:
Vectron International
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 8/2008
Page 5 of 5
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com