VC-820 CMOS Crystal Oscillator VC-820 Description Vectron’s VC-820 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The VC-820 uses a fundamental or a 3rd overtone crystal, oscillating in a fundamental tone, resulting in very low jitter performance, and a monolithic IC which improves reliability and reduces cost. Features • • • • • • • Applications CMOS output XO Output Frequencies from 625kHz to 133.000 MHz 3.3V, 2.5 V and 1.8V Operation Low Jitter Performance Output Disable Feature Operating Temperature ranging from -55°C to 125°C Small Industry Standard Package, 2.5 x 3.2 x 1.0mm • • • • • • • SONET/SDH/DWDM Ethernet, GE, SynchE Storage Area Networking Fiber Channel Digital Video Broadband Access Base Stations, Picocells • Product is compliant to RoHS directive and fully compatible with lead free assembly Block Diagram Output VDD Crystal Oscillator Gnd E/D Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page1 Specifications Performance Specifications Table 1. Electrical Performance, 3.3V Option Parameter Symbol Min VDD 3.15 Typical Max Units 3.45 V 5 V Supply Voltage Voltage1 Maximum Voltage 3.3 -0.5 Current ≤20.000MHz 20.000 to 39.999MHz 40.000 to 49.999MHz 50.000 to 79.999MHz 80.000 to 99.999MHz 100.000 to 133.000MHz 2 IDD mA 6 7 8 9 10 40 Current, Output Disabled 5 uA 133.000 MHz Frequency Nominal Frequency 3 fN 0.625 Stability (Ordering Option) ±20, ±25, ±50, ±100 4,8 ppm Outputs Output Logic Levels2, <40MHz Output Logic High Output Logic Low Output Logic High Drive Output Logic Low Drive VOH VOL IOH IOL 0.9*VDD Output Logic Levels2, 40-99.99MHz Output Logic High Output Logic Low Output Logic High Drive Output Logic Low Drive VOH VOL IOH IOL VDD-0.4 Output Logic Levels2, 100-133.000MHz Output Logic High Output Logic Low Output Logic High Drive Output Logic Low Drive VOH VOL IOH IOL 2.3 0.1*VDD 4 4 0.4 4 4 0.4 8 8 V V mA mA V V mA mA V V mA mA Load IOUT 15 pF Output Rise /Fall Time2 tR/tF 4 ns 55 % Duty Cycle , 45 25 Period Jitter RMS Peak-Peak Random Jitter Deterministic Jitter фJ RMS Jitter, 12k-20MHz, 125MHz фJ 6 50 ps 2.4 20.2 2.4 0 0.06 0.3 ps 0.3*VDD V V Enable/Disable Output Enable/Disable7 Output Enable Output Disable VIH VIL 0.7*VDD Disable time tD 150 ns Start-Up Time tSU 5 ms Operating Temp (Ordering Option) TOP 1] 2] 3] 4] 5] 6] 7] 8] -10/70, -40/85, -40/105, -40/125, -55/105, -55/125 The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF. Parameters are tested with the test circuit shown Figure 1. See Standard Frequencies and Ordering Information tables for more specific information. Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and aging. Duty Cycle is measured as On Time/Period, see Fig 2. Broadband Period Jitter measured using Wavecrest SIA3300C, 90K samples. The Output is Enabled if the Enable/Disable is left open. Only ±50 and ±100ppm stability options are available for -40/105 °C, -40/125 °C, -55/105 °C and -55/125 °C temperature range. Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page2 °C Specifications Performance Specifications Table 2. Electrical Performance, 2.5V Option Parameter Symbol Min Typical Max Units 2.625 V 5 V Supply Voltage Voltage1 VDD Maximum Voltage 2.375 2.5 -0.5 Current ≤20.000MHz 20.000 to 39.999MHz 40.000 to 79.999MHz 80.000 to 99.999MHz 100.000 to 125.000MHz 2 IDD 4.5 5.5 7 7.5 30 Current, Output Disabled mA 5 uA 125.000 MHz Frequency Nominal Frequency3 fN 0.625 Stability (Ordering Option) ±20, ±25, ±50, ±100 4,8 ppm Outputs Output Logic Levels2,3, <40MHz Output Logic High Output Logic Low Output Logic High Drive Output Logic Low Drive VOH VOL IOH IOL 0.9*VDD Output Logic Levels2, 40-99.99MHz Output Logic High Output Logic Low Output Logic High Drive Output Logic Low Drive VOH VOL IOH IOL VDD-0.4 Output Logic Levels2, 100-125.000MHz Output Logic High Output Logic Low Output Logic High Drive Output Logic Low Drive VOH VOL IOH IOL 1.65 Load IOUT Output Rise /Fall Time 0.1*VDD 4 4 0.4 4 4 0.4 8 8 tR/tF 2 Duty Cycle2,5 45 Period Jitter , 125.000MHz RMS Peak-Peak Random Jitter Deterministic Jitter фJ RMS Jitter, 12k-20MHz, 125.000MHz фJ 6 50 V V mA mA V V mA mA 15 pF 4 ns 55 % ps 2.4 20.2 2.4 0 0.061 V V mA mA 0.3 ps 0.3*VDD V V 150 ns 5 ms Enable/Disable Output Enable/Disable Output Enable Output Disable VIH VIL Disable time tD 7 Start-Up Time tSU Operating Temp (Ordering Option) TOP 1] 2] 3] 4] 5] 6] 7] 8] 0.7*VDD -10/70, -40/85, -40/105, -40/125, -55/105, -55/125 The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF. Parameters are tested with the test circuit shown Figure 1. See Standard Frequencies and Ordering Information tables for more specific information. Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and aging. Duty Cycle is measured as On Time/Period, see Fig 2. Broadband Period Jitter measured using Wavecrest SIA3300C, 90K samples. The Output is Enabled if the Enable/Disable is left open. Only ±50 and ±100ppm stability options are available for -40/105 °C, -40/125 °C, -55/105 °C and -55/125 °C temperature range. Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page3 °C Performance Specifications Table 3. Electrical Performance, 1.8V Option Parameter Symbol Min Typical Max Units 1.8 1.89 V Supply Voltage1 VDD Maximum Voltage 1.71 -0.5 Current2 ≤40.000MHz 40.000 to 49.999MHz 50.000 to 79.999MHz 80.000 to 99.999MHz 100.0000 to 125.000MHz 3.6 IDD 2.5 3.5 6.5 7 20 Current, Output Disabled V mA 10 uA 125.000 MHz Frequency Nominal Frequency3 fN 0.625 Stability (Ordering Option) ±20, ±25, ±50, ±100 4,8 ppm Outputs Output Logic Levels2,3 , <40.000MHz Output Logic High Output Logic Low Output Logic High Drive Output Logic Low Drive VOH VOL IOH IOL 0.9*VDD Output Logic Levels2,3 , 40.00-125MHz Output Logic High Output Logic Low Output Logic High Drive Output Logic Low Drive VOH VOL IOH IOL VDD-0.4 Load IOUT 15 pF tR/tF 5 ns Output Rise /Fall Time 2 Duty Cycle 2.8 2.8 Period Jitter6 RMS Peak-Peak Random Jitter Deterministic Jitter фJ RMS Jitter, 12kHz-20MHz, 62.500MHz фJ 0.4 4 4 45 2,5 0.1*VDD 50 55 V V mA mA % ps 2.4 20.2 2.4 0 0.4 V V mA mA 0.9 ps 0.3*VDD V V Enable/Disable Output Enable/Disable7 Output Enable Output Disable VIH VIL Disable time tD 150 ns Start-Up Time tSU 5 ms Operating Temp (Ordering Option ) TOP 1] 2] 3] 4] 5] 6] 7] 8] 0.7*VDD -10/70, -40/85, -40/105, -40/125, -55/105, -55/125 °C The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF. Parameters are tested with the test circuit shown Figure 1. See Standard Frequencies and Ordering Information tables for more specific information. Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and aging. Duty Cycle is measured as On Time/Period, see Fig 2. Broadband Period Jitter measured using Wavecrest SIA3300C, 90K samples. The Output is Enabled if the Enable/Disable is left open. Only ±50 and ±100ppm stability options are available for -40/105 °C, -40/125 °C, -55/105 °C and -55/125 °C temperature range. Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page4 tR IDD VDD + tF VOH .1µF 4 3 1 2 .01µF + 50% VOL 15pF On Time Period Fig 2: Waveform Fig 1: Test Circuit Outline Drawing & Pad Layout 1.0 XXXMXX YYWW C 1.1 0.8 1.3 1.2max Table 4. Pin Out Pin Dimensions in mm Symbol Function 1 E/D Enable Disable 2 GND Case and Electrical Ground 3 Output Output 4 VDD Power Supply Voltage Reliability VI qualification will include aging at various extreme temperatures, shock and vibration, temperature cycling, and IR reflow Typical Characteristics - Phase Noise and Gain Curve simulation. The VC-820 family is capable of meeting the following qualification tests: Table 4. Environmental Compliance Parameter Conditions Mechanical Shock MIL-STD-883, Method 2002 Mechanical Vibration MIL-STD-883, Method 2007 Solderability MIL-STD-883, Method 2003 Gross and Fine Leak MIL-STD-883, Method 1014 Resistance to Solvents MIL-STD-883, Method 2015 Moisture Sensitivity Level MSL 1 Contact Pads Gold (0.3um min - 1.um max) over Nickel Although ESD protection circuitry has been designed into the VC-820 proper precautions should be taken when handling and mounting. VI employs a human body model (HBM) and a charged device model (CDM) for ESD susceptibility testing and design protection evaluation. Table 5. ESD Ratings Model Minimum Conditions Human Body Model 1500V MIL-STD-883, Method 3015 Charged Device Model 1000V JESD22-C101 Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page5 Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is not implied at these or any other conditions in excess of conditions represented in the operational sections of this datasheet. Exposure to absolute maximum ratings for extended periods may adversely affect device reliability. Permanent damage is also possible if E/D is applied before VDD. Table 6. Absolute Maximum Ratings Parameter Symbol Ratings Unit Storage Temperature TS -55 to 125 °C Soldering Temp/Time TLS 260 / 30 °C / sec IR Reflow The VC-820 is qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time intervals listed are based on the Pb-Free small body requirements. The VC-820 device is hermetically sealed so an aqueous wash is not an issue. Table 7. Reflow Profile Parameter Symbol Value PreHeat Time Ts-min Ts-max tS 60 sec Min, 260 sec Max 150°C 200°C Ramp Up RUP 3 °C/sec Max Time Above 217 °C tL 60 sec Min, 150 sec Max Time To Peak Temperature TAMB-P 480 sec Max Time at 260 °C tP 30 sec Max Ramp Down RDN 6 °C/sec Max Tape and Reel Table 8 . Tape and Reel Dimensions Tape Dimensions (mm) Reel Dimensions (mm) Dimension W F Do Po P1 A B C D N W1 W2 Tolerance Typ Typ Typ Typ Typ Typ Min Typ Min Min Typ Max # Per Reel VC-820 8 3.5 1.5 4 4 178 2 13 21 60 10 14 1000 Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page6 Table 9. Standard Output Frequencies (MHz) 0.032768 0.625000 2.000 4.000 8.000 10.000 10.700 14.31818 16.000 16.384 16.875 18.432 20.000 24.000 24.576 25.000 25.0125 26.000 27.000 28.63630 29.4912 30.000 31.250 31.700 32.000 33.000 33.333000 35.328 40.000 43.675771 48.000 50.000 62.500 64.000 66.666000 75.000 80.000 93.750 100.000 106.250 108.000 114.285 125.000 Ordering Information VC-820- E A W- K A A N- xxMxxxxxxx Frequency in MHz, or K for kHz Product Crystal Oscillator Package 2.5x3.2 Ceramic Custom Options N: Standard Option Load A: 15pF Power Supply E: +3.3Vdc H: +2.5Vdc J: +1.8Vdc Enable/Disable A: Enable/Disable, Enable High Stability E: ±20ppm F: ±25ppm K: ±50ppm S: ±100ppm Output A: CMOS Temp Range W: -10/70°C E: -40/85°C F: -40/105°C (±50 and ±100ppm only) 7: -40/125°C (±50 and ±100ppm only) B: -55/105°C (±50 and ±100ppm only) C: -55/125°C (±50 and ±100ppm only) Example: VC-820-EAW-KAAN-125M00000 *Note: not all combination of options are available. Other specifications may be available upon request. Please consult with factory. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Unit 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: VI Shanghai 68 Yin Cheng Road (C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: 86.21.6194.6886 Fax: 86.21.6194.6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 01/20/2015 VN Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page7 Revision History Revision Date Approved January 20, 2015 VN Description Included ordering options for -40/105°C, -40/125°C and -55/105°C Operating temperature ranges Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page8