UNISONIC TECHNOLOGIES CO., LTD AN5151 LINEAR INTEGRATED CIRCUIT TV VIF & SIF & DEFLECTION SYSTEM (FOR TV LARGE INTEGRATION) DESCRIPTION The UTC AN5151 is a monolithic integrated circuit containing all stage for the VIF,SIF and deflection of television receivers. FEATURES *Hight integrated technology makes it possible the integration of video IF circuit tuner AFC circuit sound. IF circuit and deflection.-jungle circuit on one single chip. *supply voltage range:8V to 12V FUNCTIONS *IF Amplifier, IF AGC *Video Amplifier, Video Detector *Noise Canceller, Forward RF AGC *Tuner AFT,SIF Amplifier *Sound Detector, sync separation *Vertical oscillation trigger and driver *Horizontal oscillation driver and AFC ORDERING INFORMATION Ordering Number AN5151G-D28-T Package DIP-28 Packing Tube MARKING INFORMATION www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R111-007.B AN5151 LINEAR INTEGRATED CIRCUIT PIN CONFIGURATION VIF Input 1 A.F AGC delay ADJ. A.F AGC Output IF AGC Video Output Sync SEP. Input SIF Input SIF Output SIF Det. Input SIF Det. Input Sound Output Tuner AFT Output Tuner AFT Coil Video Det. Coil 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 28 27 26 25 24 23 22 21 20 19 18 17 16 15 VIF Input 2 Over-voltage Production Vert. Output Vert. Sawtooth Vert. Osc Sync Sep. Input FBT Pulse Input GND VCC 1 HOA. AFC Output HOR. Osc HOA. Output VCC 2 Video Det. Coil 2 2 of 5 QW-R111-007.B AN5151 LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS VCC1 12 I20 85 Supply Current I16 15 V2,3,4,24 0 V8 5.5 ~ 0 Circuit Voltage V13 4.2 ~ 0 V17 0 I5,6,11,23,26 +0.3 ~ -10 I19 +0.6 ~ -0.6 Circuit Current I25 +10 ~ 0 I17 +10 ~ -4 Power Dissipation PD 1100 Operating Temperature TOPR -20 to +70 Storage Temperature TSTG -40 to 125 Note: Absolute maximum ratings are those values beyond which the device could be permanently Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage UNIT V mA mA V V V V mAp-p mAp-p mAp-p mAp-p mW C C damaged. ELECTRICAL CHARACTERISTICS PARAMETER VIDEO SECTION Video Det. Output Input Sensitivity Maximum Input S/N Ratio Differential Gain Differential Phase Video frequency Characteristics Sync. Peak Voltage Noise inverter output level Noise inverter capture level Sound IF Output Input Resistor Input Capacitor Output Resistor RF AGC Gain RF AGC Maximum Voltage RF AGC Minimum Voltage AFT Center Voltage AFT SW Operating Voltage AFT Maximum Output Voltage AFT Minimum Output Voltage Selection Sensitivity SYMBOL Vo SVI Vmax S/N DG DP Gvf VP VNT VNI Vsif RIN CIN Ro(pin 5) GRF(AGC) V3_max V3_min V2 VAFT (SW) V12_max V12_min UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS m = 87.5% VO = -3dB VO > + 0dB VI = 80dBμ m = 87.5% m = 87.5% Vo = -3dB P/S=20dB f = 45.75MHz f = 45.75MHz f = 500kHz f = 10kHz, V4 = 5mV RS=10kΩ RL = 68kΩ / 82kΩ MIN TYP MAX 2.0 105 51 4.5 1.9 1.0 3.0 100 0.8 3.0 30 36 8.2 3.6 4.0 0.5 8.5 0 30 2.3 50 110 56 4 3 6.0 2.3 1.4 4.0 104 1.0 3.4 50 42 8.8 4.2 5.4 2.6 9.6 0.7 50 2.6 55 8 6 8.0 2.7 1.8 5.0 107 1.2 3.8 150 48 9.4 4.8 6.0 3.0 10.0 1.2 90 UNIT Vp-p dB dB dB % C MHz V V V dBμ kΩ pF Ω dB V V V V V V mV/kHz 3 of 5 QW-R111-007.B AN5151 LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS (Cont.) PARAMETER SOUND SECTION SYMBOL Sound Det. Output VO Input Limit Voltage VI_lim Total Harmonic distortion THD AM Rejection ratio AMR Input Impedance Detector input impedance R17 C17 R9 C9 R10 C10 TEST CONDITIONS fO = 4.5MHz, fm = 400Hz, f = ± 25kHz, VI =100mVrns fO = 4.5MHz, fm = 400Hz, f = ± 25kHz fO = 4.5MHz, fm = 400Hz, f = ± 25kHz, VI =100mVrns fO = 4.5MHz, fm = 400Hz, f = ± 25kHz, VI =100mVrns f = 4.5MHz f = 4.5MHz MIN TYP MAX 200 UNIT 300 440 mVrms 280 450 μVrms 0.6 1.0 % 43 55 dB 6 1.3 2.0 2.1 50 2.9 20 4.3 3.0 5.1 200 3.4 100 7.3 4.0 8.1 3.9 kΩ pF kΩ pF kΩ pF 4.8 5.1 5.4 μs 4.9 5.2 5.5 μs 4.8 5.1 5.4 μs 4.9 5.2 5.5 μs 6 V DEFLECTION SECTION Sync separation horizontal pulse width 1 tsYNC1 Sync separation horizontal pulse width 2 tsYNC2 Horizontal AFC Horizontal pulse width 1 tsYNC3 Horizontal AFC Horizontal pulse width 2 tsYNC4 Vertical Osc, start supply voltage Vertical free runing frequency Vertical Osc. Pulse width Vertical full in Range Horizontal OSC. Start supply voltage Horizontal Osc. Frequency Horizontal Osc. Pulse width Vvos fvo tvo fv(pull) Vhos fho tho Horizontal OSC Control Sensitivity Phase Det. Sensitivity μP X-ray protector operation voltage X-ray protector input resistor V27 R27 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Video input 2.5Vp-p APL=50%,VCC1=10V Video input 1.0Vp-p APL=50%,VCC1=10V Video input 2.5Vp-p APL=50%,VCC1=10V Video input 1.0Vp-p APL=50%,VCC1=10V fvo=50~70Hz, Output=0.7Vp-p Rosc=31.5kΩ Rosc=31.5kΩ VCC1=12V,8V fvo/VCC= fvo(12V) - fvo(8V) fho=10~20kHz, output=1Vp-p pin 16 Voltage ROSC=21kΩ ROSC =21kΩ I1=+-100μA input Variable Osc. Frequency Variable TV input 2Vp-p, R(u)=31.4kΩ, μ=V19×10 57 470 60 650 63 830 Hz μs 0 1.0 1.3 Hz 5 V 15.0 15.75 16.25 23 25 29 73 81 89 kHz μs Hz/μA 13.5 16.5 19.5 μA/μS 0.81 0.87 0.93 16 19 22.5 V kΩ 4 of 5 QW-R111-007.B AN5151 Over-voltage Production Vert. Output Vert. Sawtooth Vert. Osc Sync Sep. Input FBT Pulse Input GND VCC 1 HOA. AFC Output HOR. Osc HOA. Output VCC 2 TYPICAL APPLICATION CIRCUIT 27 26 25 24 23 22 21 20 19 18 17 16 RF AGC VIF Input 2 28 VIF Input 1 1 IF AGC IF Amp. Sync. Sep. HOR. AFC HOR. Osc. HOR. Drive 15 Video Det. Coil 2 Video Det. 2 3 4 5 6 7 8 9 10 11 12 13 SIF Det. Input SIF Det. Input Sound Output Tuner AFT Output Tuner AFT Coil Tuner AFT SIF Output FM Det. SIF Input SIF Amp. Sync SEP. Input Video Amp. Video Output Noise Can-celler IF AGC IF AGC 14 Video Det. Coil 1 R.F AGC Output RF AGC IF AGC R.F AGC delay ADJ. LINEAR INTEGRATED CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R111-007.B