UNISONIC TECHNOLOGIES CO., LTD U74LVC1G08 CMOS IC 2-INPUT AND GATE DESCRIPTION The U74LVC1G08 is a 2-input AND gate which provides the Function Y=A×B. This device has power-down protective circuit to prevent device form destruction when it is powered down. FEATURES * Operation Voltage Range: 1.6V ~ 5.5V * Low Power Current: ICC=10μA (Max.) * ±24mA Output Drive (VCC=3.0V) * Power Down Protection ORDERING INFORMATION Ordering Number U74LVC1G08G-AE5-R U74LVC1G08G-AF5-R U74LVC1G08G-AL5-R U74LVC1G08G-K06-1010-R Package SOT-23-5 SOT-25 SOT-353 DFN-6(1.0×1.0) Packing Tape Reel Tape Reel Tape Reel Tape Reel MARKING SOT-23-5 / SOT-25 / SOT-353 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd DFN-6(1.0×1.0) 1 of 5 QW-R502-223.H U74LVC1G08 CMOS IC PIN CONFIGURATION VCC 5 Y 4 GND 3 A 2 B 1 1 A 2 B 3 GND 4 Y 5 N.C 6 VCC DFN-6(1.0×1.0) (TOP VIEW) SOT-23-5 / SOT-25 / SOT-353 FUNCTION TABLE (each gate) INPUT A L L H H OUTPUT Y L L L H B L H L H LOGIC DIAGRAM (positive logic) A B 1 2 4 Y A B Logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 1 2 & 4 Y IEC logic symbol 2 of 5 QW-R502-223.H U74LVC1G08 CMOS IC ABSOLUTE MAXIMUM RATING (TA=25°С, unless otherwise specified) (Note 2) PARAMETER Supply Voltage Input Voltage SYMBOL VCC VIN Output Voltage VOUT TEST CONDITIONS RATINGS -0.5~6.5 -0.5~6.5 -0.5~VCC+0.5 -0.5~6.5 Output in the high or low state Output in the power-off state UNIT V V V V Continuous VCC or GND ICC ±100 mA Current Continuous Output Current IOUT ±50 mA Input Clamp Current IIK VIN<0 -50 mA Output Clamp Current IOK VOUT<0 -50 mA Storage Temperature Range TSTG -65 ~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. THERMAL DATA PARAMETER SOT-23-5 SOT-25 Junction to Ambient SOT-353 DFN-6(1.0×1.0) SYMBOL θJA UNIT °C/W °C/W °C/W °C/W RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage Output Voltage VIN VOUT t/v Input Transition Rise or Fall Rate Operating Temperature RATINGS 280 230 350 250 TEST CONDITIONS Operating Data retention only High or low state VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=5V±0.5V TA MIN 1.65 1.5 0 0 TYP -40 MAX 5.5 5.5 VCC UNIT V V V V 32 ns/V 20 10 125 ns/V ns/V °C MAX UNIT STATIC CHARACTERISTICS (TA=25°С, unless otherwise specified) PARAMETER SYMBOL High-Level Input Voltage Low-Level Input Voltage High-Level Output Voltage VIH VIL VOH TEST CONDITIONS VCC =1.65V~1.95V VCC =2.3V~2.7V VCC =3.0V~3.6V VCC =4.5V~5.5V VCC =1.65V~1.95V VCC =2.3V~2.7V VCC =3.0V~3.6V VCC =4.5V~5.5V VCC =1.65V ~ 5.5V, IOH=-100μA VCC =1.65V, IOH=-4mA VCC =2.3V, IOH=-8mA IOH=-16mA VCC =3.0V IOH=-24mA VCC =4.5V, IOH=-32mA UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 0.65×VCC 1.7 2 V 0.7×VCC 0.35×VCC 0.7 0.8 V 0.3×VCC VCC-0.1 1.2 1.9 2.4 2.3 3.8 V 3 of 5 QW-R502-223.H U74LVC1G08 CMOS IC STATIC CHARACTERISTICS (Cont.) PARAMETER SYMBOL Low-Level Output Voltage Input Leakage Current Power OFF Leakage Current VOL II(LEAK) IOFF Quiescent Supply Current IQ Additional Quiescent Supply Current IQ Input Capacitance CIN MIN TYP MAX 0.1 0.45 0.3 0.4 0.55 0.55 ±5 ±10 UNIT 10 μA 500 μA 4 V μA μA pF DYNAMIC CHARACTERISTICS (TA=25°С, unless otherwise specified) PARAMETER SYMBOL Propagation delay from input (A or B) to output(Y) tPLH/tPHL TEST CONDITIONS VCC =1.65V ~ 5.5V, IOL=100μA VCC =1.65V, IOL=4mA VCC =2.3V, IOL=8mA IOL=16mA VCC =3.0V IOL=24mA VCC =4.5V, IOL=32mA VCC =0V ~ 5.5V, VIN=5.5V or GND VCC =0V, VIN or VOUT=5.5V VCC =1.65V~5.5V, VIN=5.5V or GND IOUT=0 VCC=3V~5.5V,One input at VCC-0.6V, other inputs at VCC or GND VCC =3.3V, VIN=VCC or GND TEST CONDITIONS VCC=1.8V±0.15V VCC=2.5V±0.2V CL=15pF VCC=3.3V±0.3V VCC=5V±0.5V VCC=1.8V±0.15V VCC=2.5V±0.2V CL=30 or 50pF VCC=3.3V±0.3V VCC=5V±0.5V MIN 1.5 0.7 0.8 0.8 2.4 1.1 1 1 TYP MAX 7.2 4.4 3.6 3.4 8 5.5 4.5 4 UNIT ns ns ns ns ns ns ns ns MAX UNIT pF pF pF pF OPERATING CHARACTERISTICS (f=10MHz, TA=25°С, unless otherwise specified) PARAMETER SYMBOL Power Dissipation Capacitance CPD TEST CONDITIONS VCC=1.8V VCC=2.5V VCC=3.3V VCC=5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 21 24 26 31 4 of 5 QW-R502-223.H U74LVC1G08 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VIN VCC VCC 3V VCC VCC VCC 3V VCC tR,/tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM VCC/2 VCC/2 1.5V VCC/2 VCC/2 VCC/2 1.5V VCC/2 VLOAD 2×VCC 2×VCC 6V 2×VCC 2VCC 2×VCC 6V 2×VCC CL 15pF 15pF 15pF 15pF 30pF 30pF 50pF 50pF RL 1MΩ 1MΩ 1MΩ 1MΩ 1KΩ 500Ω 500Ω 500Ω V△ 0.15V 0.15V 0.3V 0.3V 0.15V 0.15V 0.3V 0.3V UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-223.H