UNISONIC TECHNOLOGIES CO., LTD U74LVC1G07 CMOS IC BUFFER/DRIVER WITH OPEN-DRAIN OUTPUT DESCRIPTION The U74LVC1G07 is a single Buffer/Driver with open-drain output. This device has power-down protective circuit, preventing device destruction when it is powered down. FEATURES * Inputs and open-drain output accept voltage up to 5.5V * Low power Current: ICC=10μA(Max) *±24mA output drive(VCC=3.3V) * Power down protection ORDERING INFORMATION Ordering Number Lead Free U74LVC1G07L-AE5-R U74LVC1G07L-AF5-R U74LVC1G07L-AL5-R Halogen Free U74LVC1G07G-AE5-R U74LVC1G07G-AF5-R U74LVC1G07G-AL5-R Package Packing SOT-23-5 SOT-25 SOT-353 Tape Reel Tape Reel Tape Reel MARKING 5 4 3Y7 1 2 L: Lead Free G: Halogen Free 3 www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-215.E U74LVC1G07 PIN CONFIGURATION VCC 5 1 NC Y 4 2 A 3 GND FUNCTION TABLE (each gate) INPUT(A) H L CMOS IC OUTPUT(Y) Z L LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-215.E U74LVC1G07 CMOS IC ABSOLUTE MAXIMUM RATING (unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~6.5 V Input Voltage VIN -0.5~6.5 V Active -0.5~6.5 Output Voltage VOUT V Power-Down -0.5~6.5 Input Clamp Current(VIN<0) IIK -50 mA Output Clamp Current(VOUT<0) IOK -50 mA Output Current IOUT ±50 mA VCC or GND Current ICC ±100 mA Storage Temperature TSTG -65 ~ +150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage Output Voltage Operating Temperature VIN VOUT TOPR CONDITIONS Operating Data retention only MIN 1.65 1.5 0 0 -40 TYP MAX 5.5 5.5 5.5 125 UNIT V V V V °С STATIC CHARACTERISTICS (TA=25°С) PARAMETER High-Level Input Voltage Low-Level Input Voltage Low-Level Output Voltage Input Leakage Current Power OFF Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Input Capacitance Output Capacitance SYMBOL VIH VIL VOL II(LEAK) IOFF IQ ΔIQ CIN COUT TEST CONDITIONS MIN VCC =1.65V~1.95V 0.65*VCC VCC =2.3V~2.7V 1.7 VCC =3.0V~3.6V 2 VCC =4.5V~5.5V 0.7* VCC VCC =1.65V~1.95V VCC =2.3V~2.7V VCC =3.0V~3.6V VCC =4.5V~5.5V VCC =1.65V ~ 5.5V, IOL=100μA VCC =1.65V, IOL=4mA VCC =2.3V, IOL=8mA VCC =3.0V, IOL=16mA VCC =3.0V, IOL=24mA VCC =4.5V, IOL=32mA VCC =0V ~ 5.5V, VIN=VCC or GND VCC =0V, VIN or VCC=5.5V VCC=1.65V~5.5V,VIN=VCC or GND, IOUT=0 VCC =3V~ 5.5V, One input at VCC-0.6V, other inputs at VCC or GND VCC =3.3V, VIN=VCC or GND VCC =3.3V, VOUT=VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP MAX 0.1 0.45 0.3 0.4 0.55 0.55 ±5 ±10 10 UNIT V V V V V V V V V V V V V V μA μA μA 500 μA 0.35* VCC 0.7 0.8 0.3* VCC 4 5 pF pF 3 of 5 QW-R502-215.E U74LVC1G07 CMOS IC DYNAMIC CHARACTERISTICS (TA=25°С) PARAMETER SYMBOL Propagation delay from input (A) to output(Y) tPLZ/tPZL TEST CONDITIONS VCC=1.8V±0.15V, CL=30pF, RL=1KΩ VCC=2.5V±0.2V,CL=30pF, RL=500Ω VCC=3.3V±0.3V,CL= 50 pF, RL=500Ω VCC= 5V±0.5V, CL= 50 pF, RL=500Ω MIN 2.4 1 1.5 1 TYP MAX 8.3 5.5 4.2 3.5 UNIT ns ns ns ns MIN 3 3 3 3 TYP 3 3 4 6 MAX UNIT pF pF pF pF OPERATING CHARACTERISTICS (TA=25°С) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VCC=1.8V, f=10MHz VCC=2.5V, f=10MHz VCC=3.3V , f=10MHz VCC=5V, f=10MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-215.E U74LVC1G07 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V Input VIN VCC VCC 3V VCC tR/tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM VCC/2 VCC/2 1.5V VCC/2 1/ 2 * VCC VLOAD 2* VCC 2* VCC 6V 2* VCC CL 30pF 30pF 50pF 50pF V△ 0.15V 0.15V 0.3V 0.3V RL 1KΩ 500Ω 500Ω 500Ω 1/ 2 * VCC t PZL t PLZ 1/ 2 * VLOAD Output 1/ 2 * VCC VOL+∆V tPHZ tPZH 1/ 2 * VCC VOL 1/ 2 * VLOAD 1/ 2 * VLOAD -∆V Output UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-215.E