AZ942 on tin ue d ! 16 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • Extremely low cost High switching capacity — 16 Amps DC coils to 48 VDC UL, CUR file E44211; VDE file 6820 Class F insulation available 5 GENERAL DATA CONTACTS Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load Medium Duty Heavy Duty Material Max. switched power: 480 W or 4000 VA Max. switched current: 16 A Max. switched voltage: 30 VDC or 300 VAC UL Rating: 12 A at 28 VDC 12 A at 277 VAC 16A at 250 VAC 2.0 A at 240 VAC pilot duty Medium Duty: Silver cerium Heavy Duty: Silver tin oxide <100 milliohms initially (24 V, 1 A voltage drop method) sc Resistance Max. switched power: 150 W or 2770 VA Max. switched current: 10 A Max. switched voltage: 30 VDC or 300 VAC UL Rating: 5 A at 30 VDC 10 A at 277 VAC 1/3 HP at 125 VAC (1 Form A) 2.9 A 125 VAC pilot duty (1 Form A) COIL Power 230 mW Max Continuous Dissipation Class B: 1.8 W at 20°C (68°F) ambient Class F: 2.4 W at 20°C (68°F) ambient Di At Pickup Voltage (typical) Life Expectancy Mechanical Electrical Minimum operations 1x107 1 x 105 at 10A 277 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1750 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature At nominal coil voltage Operating Class B: -40°C (-40°F) to 70°C (158°F) Class F: -40°C (-40°F) to 85°C (185°F) Storage -40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10–55Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 13 g NOTES 1. All values at 20°C (68°F). Temperature Rise 23°C (42°F) at nominal coil voltage 2. Relay may pull in with less than “Must Operate” value. Temperature Class B: Max. 130°C (266°F) Class F: Max. 155°C (311°F) 3. Unsealed relays should not be dip cleaned. ZETTLER 4. Specifications subject to change without notice. 5 AZ942-1CT unsealed version is VDE approved at 5 A, 250 VAC, 50,000 operations. AZ942-1CT sealed or unsealed version is VDE approved at 7 A, 250 VAC, 6,000 operations. electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-04-08 ! AZ942 RELAY ORDERING DATA on tin ue d STANDARD RELAYS: Medium Duty Type (10 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.7 5 11.2 6 9 12 24 48 ORDER NUMBER* Coil Resistance ±10% 25 Must Operate VDC 2.4 AZ942–1CH–3D AZ942–1CH–3DE 70 4.0 AZ942–1CH–5D AZ942–1CH–5DE 13.4 100 4.8 AZ942–1CH–6D AZ942–1CH–6DE 20.1 225 7.2 AZ942–1CH–9D AZ942–1CH–9DE 26.8 400 9.6 AZ942–1CH–12D AZ942–1CH–12DE Unsealed Sealed 53.6 1,600 19.2 AZ942–1CH–24D AZ942–1CH–24DE 107.3 6,400 38.4 AZ942–1CH–48D AZ942–1CH–48DE *Substitute “1AT” in place of “1CH” to indicate 1 Form A contact. To indicate Class F version, add suffix “F.” RELAY ORDERING DATA STANDARD RELAYS: Heavy Duty Type (16 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.7 5 11.2 6 9 12 24 48 ORDER NUMBER* Coil Resistance ±10% 25 Must Operate VDC 2.4 AZ942–1CT–3D AZ942–1CT–3DE 70 4.0 AZ942–1CT–5D AZ942–1CT–5DE 13.4 100 4.8 AZ942–1CT–6D AZ942–1CT–6DE 20.1 225 7.2 AZ942–1CT–9D AZ942–1CT–9DE 26.8 400 9.6 AZ942–1CT–12D AZ942–1CT–12DE Unsealed Sealed 53.6 1,600 19.2 AZ942–1CT–24D AZ942–1CT–24DE 107.3 6,400 38.4 AZ942–1CT–48D AZ942–1CT–48DE *Substitute “1AW” in place of “1CT” to indicate 1 Form A contact. To indicate Class F version, add suffix “F.” MECHANICAL DATA .89 (22.5) TERMINAL DIMENSIONS sc .65 (16.5) .016 (0.4) Terminal Number Dimensions 1 2, 5 3, 4 .013 X .040 .013 X .036 .013 X .040 PC BOARD LAYOUT .05 5 HOLES (1.3) .082 (2.1) WIRING DIAGRAM .65 (16.5) .472 (12.0) CL 3 2 * 1 .040 (1.0) 5 PLACES Di .013 (0.3) .078 (2.0) .138 (3.5) .480 (12.2) 4* 5 Viewed toward terminals *Not used on Form A relay Viewed toward terminals *Not used on Form A relay Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-04-08