AZ961 MINIATURE POWER RELAY FEATURES • • • • • • 1 Form A or 1 Form C Standard and sensitive coils All plastics rated 94V-0 Epoxy sealed version available Class B insulation system UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement SPST NO (1 Form A) SPDT (1 Form C) Ratings Resistive load: 1 Form A Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 150 VDC* or 300 VAC 1 Form C Max. switched power: 150 W or 1250 VA (N.O.) 750 VA (N.C.) Max. switched current: 5 A (N.O.), 3 A (N.C.) Max. switched voltage: 150 VDC* or 300 VAC UL, CUR Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 5 A 240 VAC Res. N.O. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts 4000 V surge (2 x 10 us) coil to contact Insulation Resistance 1000 megohms min. at 500 VDC, 20°C, 50% RH 1 Form A: 5 A at 250 VAC, General Use 3 A at 30 VDC Dropout Greater than 5% of nominal coil voltage 1 Form C: 5 A / 3 A at 250 VAC, General Use 5 A / 3 A at 30 VDC (N.O. / N.C.) Ambient Temperature Operating Standard: 40°C (-40°F) to 75°C (167°F) Sensitive: 40°C (-40°F) to 85°C (186°F) *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Storage 40°C (-40°F) to 105°C (221°F) Material Silver cadmium oxide Vibration 0.062" (1.5 mm) DA at 10–55 Hz Resistance < 100 milliohms initially (6 V 1 A voltage drop method) Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 250°C (482°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 8 grams COIL Power At Pickup Voltage (typical) Standard coil: 176 mW Sensitive coil: 129 mW Max Continuous Dissipation 1.5 W at 20°C (68°F) Temperature Rise At nominal coil voltage: Standard coil: 27°C (49°F) Sensitive coil: 20°C (36°F) Max. Temperature 130°C (266°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-23 AZ961 RELAY ORDERING DATA STANDARD COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.1 Coil Resistance Ohm ±10% 25 ORDER NUMBER* Must Operate VDC 2.1 1 Form A 1 Form C AZ961–1A–3D AZ961–1C–3D 5 10.2 69 3.5 AZ961–1A–5D AZ961–1C–5D 6 12.2 100 4.2 AZ961–1A–6D AZ961–1C–6D 9 18.4 225 6.3 AZ961–1A–9D AZ961–1C–9D 12 24.5 400 8.4 AZ961–1A–12D AZ961–1C–12D 18 36.7 900 12.6 AZ961–1A–18D AZ961–1C–18D 24 48.9 1,600 16.8 AZ961–1A–24D AZ961–1C–24D 48 97.9 6,400 33.6 AZ961–1A–48D AZ961–1C–48D SENSITIVE COIL COIL SPECIFICATIONS Nominal Coil VDC 3 ORDER NUMBER* Max. Continuous VDC 7.3 Coil Resistance Ohm ±10% 36 Must Operate VDC 2.1 AZ961–1A–3DS AZ961–1C–3DS 5 12.2 100 3.5 AZ961–1A–5DS AZ961–1C–5DS 6 14.7 145 4.2 AZ961–1A–6DS AZ961–1C–6DS 9 22.0 325 6.3 AZ961–1A–9DS AZ961–1C–9DS 12 29.3 575 8.4 AZ961–1A–12DS AZ961–1C–12DS 18 44.2 1,300 12.6 AZ961–1A–18DS AZ961–1C–18DS 24 58.9 2,310 16.8 AZ961–1A–24DS AZ961–1C–24DS 48 117.0 9,220 33.6 AZ961–1A–48DS AZ961–1C–48DS 1 Form A 1 Form C *For epoxy sealed version, add suffix “E”. MECHANICAL DATA PC BOARD LAYOUT .807 [20.5] .413 [10.5] 3 x ø.047±.003 [ø1.19±.076] .807 [20.5] .054 [1.37] .100 [2.54] .057 [1.44] .200 [5.08] .300 [7.62] 2 x ø.039±.003 [ø1.0±.076] .500 [12.7] .100 [2.54] 4 x .020 [0.5] 5 x .134 [3.4] VIEWED TOWARD TERMINALS 2 x .016 [0.4] 2 x .024 SQ [0.6 SQ] WIRING DIAGRAMS 2 x .024 [0.6] 2 1 4 .010 [0.25] 5 2 5 4 3 3 .032 [0.8] 1 FORM C 1 FORM A VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-23