AZ987 30 AMP MICRO AUTOMOTIVE RELAY FEATURES • • • • • • • Up to 30 Amp switching capability in a compact size Form A and Form C contacts available Single and Dual (Twin) relay versions Designed for high in-rush applications Epoxy sealed ISO/TS 16949, ISO 9001, ISO 14000 Tested in accordance with J2544 GENERAL DATA CONTACTS Arrangement SPST (1 Form A) DPST (2 Form A) SPDT (1 Form C) DPDT (2 Form C) Ratings Resistive load: Life Expectancy Mechanical Electrical Minimum operations 1 x 106 3 x 105 at 20 A 14 VDC Res. Operate Time 3 ms typical at nominal coil voltage Max. switched power: 480 W Max. switched current: 30 A / 25 A (N.O. / N.C.) Max. switched voltage: 16 VDC Release Time 1.5 ms typical at nominal coil voltage (with no coil suppression) Rated load: 30 A at 16 VDC Dielectric Strength 500 Vrms coil to contact (at sea level for 1 min.) 500 Vrms between open contacts Material Silver tin oxide Insulation Resistance Resistance < 50 milliohms initially (6 V, 1 A voltage drop method) 100 megohms min. at 20°C, 500 VDC 50% RH Dropout Greater than 12.5% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 105°C (221°F) Vibration 6 g at 10-500 Hz 187 mW Shock 30 g, 6 ms Max. Continuous Dissipation 2.6 W at 20°C (68°F) ambient Enclosure P.B.T. polyester Temperature Rise 34°C (61°F) at nominal coil voltage Terminals Tinned copper allloy, P.C. Weight 4 / 8 grams (Single / Twin) Max. Solder Temp. 260°C (500°F) Max. Solder Time 5 seconds 1. All values at 20°C (68°F). Max. Solvent Temp. 80°C (176°F) 2. Relay may pull in with less than “Must Operate” value. Max. Immersion Time 30 seconds Packing unit in pcs Single Twin 25 per plastic tube / 2000 per carton box 10 per plastic tube / 1000 per carton box COIL Power At Pickup Voltage (typical) Max Temperature 155°C (311°F) NOTES 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2012-05-24 AZ987 RELAY ORDERING DATA COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC Must Operate VDC Max. Continuous VDC Coil Resistance Ohm ± 10% Form A (DPST) Form C (DPDT) 6 3.5 13.2 63 AZ987-1A-6DT AZ987-1C-6DT 10 5.7 22.0 181 AZ987-1A-10DT AZ987-1C-10DT 12 6.9 26.0 254 AZ987-1A-12DT AZ987-1C-12DT * Substitute “1A” or “1C” with “2A” or “2C” to indicate Twin relay. Substitute “DT” with “DET” for epoxy sealed version. MECHANICAL DATA SINGLE RELAY 12.3 max. 2.50 0.60 13.22 max. PC BOARD LAYOUTS 0.95 SINGLE RELAY 7.65 ±0.3 10.20 max. TWIN RELAY 8.00 ±0.1 0.40 0.50 ±0.1 5.80 2.80 0.50 4 x Ø 1.10 7.00 ±0.1 ±0.1 ±0.2 * 2 x Ø 1.10 3.60 ±0.1 2 x 1.20 x 0.60 3.00 ±0.1 2 x Ø 0.50 10.20 7.00 ±0.1 3 x Ø 1.8 ±0.1 10.20 7.20 ±0.1 3.00 ±0.1 * 7.00 ±0.1 6 x Ø 1.8 8.00 ±0.1 * not used on 1 Form A version 0.5 ±0.1 7.5 0.50 ±0.1 19.20 ±0.2 3.60 ±0.1 3.00 ±0.1 1.36 ±0.1 3.00 ±0.05 * 8.00 ±0.1 1.00 x 1.00 0.60 ±0.05 ±0.1 * not used on 2 Form A version ±0.1 Viewed toward component side 1.75 ±0.1 8.5 ±0.1 TWIN RELAY WIRING DIAGRAMS 24.0 max. 2.50 0.60 13.22 max. 0.95 SINGLE RELAY 7.65 ±0.3 10.20 max. 3* 5 4 1 TWIN RELAY 3* 5 4 2 1 1 0.40 2.80 ±0.2 2 2 4 * not used on 1 Form A version 5 *3 * not used on 2 Form A version 2 x 1.00 x 1.00 Viewed toward terminals 4 x 1.20 x 0.60 4 x Ø 0.50 ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2012-05-24