Little EX Series This series is for use in hazardous areas This is suitable for use in water, industrial wastewater and sewage, that can have wide variations of temperature. The rounded body design and floating attitude prevents accumulation of solids on the body. The switch has additional internal ballast, to bring the centre of gravity and rotation close to the cable entry point. The switching element is a self cleaning type, that makes the complete switch insensitive to humidity and condensation, allowing this type to operate in widely fluctuating temperatures. The switch contacts are rated at . Supplied, as standard, with 5, 10 or 20 metres cable. Certified for use in hazardous areas as below. ATEX II 1 G Ex ia IIC T6 Technical Specifications LITTLE-EX-5 LITTLE-EX-10 LITTLE-EX-20 Contact Form C/O C/O C/O Material High Density Polyethylene Temp Range °C 0 / +55 °F + 32 / +131 Cable (standard lengths) 5 metre 10 metre 20 metre Cable colour Blue - Polyurethane Max. working pressure 10 bar Electrical Specifications Switching Voltage Max 9.6V Switching Current Max. Resistive 21.4mA It is necessary to use an Exia barrier with these switches • For smaller tanks and restricted space • Use in sewer and industrial waste water • Shape avoids “ragging”, in sewer systems • Unaffected by suspended solids • Operates in Turbulent Fluids MECHANICAL 47 15° 15° Minimum Cable Pivot length 120mm ISO 9001C E R T I F IED Off - On Differential On - Off 129 75 Cynergy3 Components Ltd 7 Cobham Road Ferndown Industrial Estate Wimborne Dorset BH21 7PE Tel: +44 (0) 1202 897969 [email protected] www.cynergy3.com © 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.