www.osram.com LEDOTRON® Product description Dimming is becoming digitial The innovative dimming and control technology says goodbye to the compatibility problems between control devices and lamps An Alliance of Product Offering Type reference GL LB, Edition May 2013 subject to alteration Power CCT Beam Angle CRI LEDr PAR16 50 35 adv 827 LEDr Classic A 60 12W 827 6.8W 12W 2700K 2700K 35° ~220° 80 80 CFLi Classic A 60 14W 827 CFLi Stick 18W CFLi Globe 14W 14W 18W 14W 2700K 2700K 2700K n.a. n.a. n.a. 80 80 80 1 1. Key Features and Benefits 1 2 • Compatibility of CFLi and LEDr lamps and control unit guaranteed • digital dimming1 • Dimming range 1% to 100% • Flicker free dimming • Flexible Scene Control (only LEDr) • plug and play solution via existing wire • UV and NIR radiation free • Mercury free (only LEDr) • Up to 5 years Osram Guarantee for LEDr • 10 LEDOTOTRON (lamp type variable) lamps can be controlled with one contul unit • Future possibilities o Colour control o Wireless control o KNX integration See www.osram.com/dim See www.osram.com/guarantee GL LB, Edition May 2013 subject to alteration 2 2 3 2. Lamp Characteristics Power Luminous flux LEDr LEDOTRON Classic A 60 12W LEDr LEDOTRON Par 160 50 10,5W CFLi LEDOTRON Classic A 60 14W CFLi LEDOTRON Globe 14W CFLi LEDOTRON Stick 18W 810lm 350lm 740lm 820 1140 Luminous intensity in cd n.a. 900cd n.a. n.a. n.a. CCT Standard deviation (SDCM) Colour rendering index 2700K 2700K 2700K 2700K 2700K <6 <4 n.a. n.a. n.a. 80 80 80 80 80 Beam angle ~220° 35° n.a. n.a. n.a. 30000 30000 10000 20000 20000 1,000,000 1,000,000 30,000 2,000,000 2,000,000 Metal/plastic Metal/plastic n.a. n.a. n.a. < 0,5s <0,5s <1s <1s <1s <2s <2s <100s < 20s < 20s ≥0,55 ≥0,55 ≥0,55 ≥0,55 ≥0,55 0g 0g <2g 1,45g 1,45 E27 GU10 E27 E27 E27 Length 116mm 85mm 130mm 170mm 148mm Diameter 62mm 50mm 61mm 119mm 45m 175g 85g 90g 81g 136g 80°C 75°C n.a. n.a. n.a. 0,085A 0,053A 0,14 0,15 0,145 4 Average lifetime Switching cycles (30s on, 30s off) Casing material Starting time Warm up time for 60% light Power factor Mercury max. Base Type Weight Tc temperature max. 5 Nominal current Max. current Operating Temp.°C GL LB, Edition May 2013 subject to alteration <16A <12,5A n.a. n.a. n.a. -20 to 40 -20 to 40 -30 to +50 -30 to +50 -30 to +50 3 4. Light distribution curve LEDr Classic A 60 12W 827 LEDr PAR16 50 35 adv 827 5. Mounting information Good heat exchange supports ideal performance. Do not use the product in totally enclosed and thermally isolated fixture. 3 only LEDr:Typical values measured at 230V AC. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 4 only LEDr: The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage. To achieve a full lifetime a good heat exchange for the electronic components is required. 5 only LEDr: The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 200901) GL LB, Edition May 2013 subject to alteration 4 6. Disposal information WEEE-lamps can be returned at specific collection points. LED lamps have to be disposed as special waste. 7. Application Information Applications • hotels • restaurant • commercial areas • residentials • art galleries and museum • office space • home Application Notes 1. suitable for indoor application. 2. for outdoor applications and operation in damp locations special approved fixture are required. 9. Ordering Guide Type reference Product Number – 1pcs Product Number – 1 shipping unit Number of pcs / ship. unit Parathom Pro Par 16 50 LEDOTRON 4008321988560 4008321988737 10 Parathom Classic A 60 LEDOTRON 4008321988553 4008321988720 10 DULUX INT Classic A 14W E27 4008321988546 4008321988522 10 DULUX INT Stick 18W E27 4008321671059 4008321671066 10 DULUX INT Globe 14W E27 4008321694652 4008321694669 10 10. Lamp conformity (refered to LEDr) 2004/108/EC Electromagnetic compatibility (EMC) 2009/125/EC Ecodesign requirements for energy related products 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems IEC/TR 62471-2 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufactoring requirements relating to non-laser optical radiation safety EN 55015 Limits and methods of measurement of radio disturance EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low voltage supply systems EN61547 Electromagnetic compatibility immunity requirements 2006/95/EC Electrical equipment designed for use within certain valtage limits EN 62560 Self ballasted LED-lamps for general lighting services by voltage >50V - Safety specifications GL LB, Edition May 2013 subject to alteration 5 11. Dimming behaviours Status May 2013 Only suitable for LEDOTRON® control units (according IEC 62756-16). Available from the following suppliers Further information under www.osram.com/ledotron 6 Standard still under develeopment. Final version is expected by the beginning of 2014 GL LB, Edition May 2013 subject to alteration 6