www.osram.com LED STAR CLASSIC A60 Product description • True replacement for 60W incandescent lamp • Classic incandescent lamp design with E27 base • Average lifetime 15.000 hours (15 Years ) • Low energy consumption 1 Product Offering Type reference 10W 2700K 80 10W 6500K 80 LED STAR CLASSIC A60 WW B22d 10W 2700K 80 based on an average lifetime of 15,000 hours if used for about 2.7 hours each day See www.osram.com/guarantee GL MK, Edition January 2013 subject to alteration CRI LED STAR CLASSIC A60 D E27 • 10W LED lamp as high-quality replacement of 60W incandescent lamp • E27 and B22d base • avaible in incandescent-like 2700K Warm White colour temperature • good colour rendering • reduces energy consumption up to 80% • shock-proof and vibration-proof • 15,000 hours lifetime • UV and NIR radiation free • Mercury free 2 • 3 years OSRAM Guarantee 2 CCT LED STAR CLASSIC A60 WW E27 1. Key Features and Benefits 1 Wattage 1 3 2. Common Characteristics Average lifetime4 Switching cycles Casing material Starting time (30s on, 30s off) 15,000h 100,000 plastic Mercury max. Base Type Length Diameter 0.0mg E27 110mm 60mm 3. Characteristic Range Type reference 0.0s Weight 120g Tc temperature max.5 90°C Warm up time for 60% light Power factor none 0.93 Nominal current (230V) 0.048A 3 Wattage Luminous Correlated colour temperature CRI Beam angle flux CLASSIC A60 WW E27 10W 806lm 2700K±150K 80 130° CLASSIC A60 D E27 10W 806lm 6500K±500K 80 130° CLASSIC A60 WW B22d 10W 806lm 2700K±150K 80 130° 5. Disposal information WEEE-lamps can be returned at specific collection points. LED lamps have to be disposed as special waste. 6. Application Information Applications • All typical houshold luminaires • residentials • hotels • hospitals • facilities • commercial areas • office space Application Notes 1. suitable for indoor application. 2. for outdoor applications and operation in damp locations special approved fixture are required. 3. Input voltage: 100-240V (48mA) 4. Operating temperature range between -20°C and 40°C 3 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage. To achieve a full lifetime a good heat exchange for the electronic components is required. 5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01) GL MK, Edition January 2013 subject to alteration 2 8. Ordering Guide Type reference CLASSIC A60 WW E27 Product Number – 1pcs Product Number – 1 shipping unit Number of pcs / ship. unit 4008321993076 4008321993182 6 CLASSIC A60 D E27 4008321993120 4008321993236 6 CLASSIC A60 WW B22d 4008321993113 4008321993229 6 9. Lamp conformity 2004/108/EC Electromagnetic compatibility (EMC) 2009/125/EC Ecodesign requirements for energy related products 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems IEC/TR 62471-2 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufactoring requirements relating to non-laser optical radiation safety EN 55015 Limits and methods of measurement of radio disturance EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low voltage supply systems EN61547 Electromagnetic compatibility immunity requirements GL MK, Edition January 2013 subject to alteration 3