EC-Declaration of Conformity Annex Document number: 2012 / QTIS e_03 The conformity of the designated product(s) with the provisions of the European Directive 2006/95/EC is given by the compliance with the following European Standard(s). If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 61347-1: 2008 + A1:2011 Lamp controlgear — Part 1: General and safety requirements EN 61347-2-1. 2001 + Corrigendum:2003 + A1:2006 + Corrigendum:2006 Corrigendum:2010 Lamp controlgear — Part 2-1: Particular requirements for starting devices (other than glow starters) EN 61347-2-2: 2012 Lamp controlgear — Part 2-2: Particular requirements for d. c. or a. c. supplied electronic step-down convertors for filament lamps EN 61347-2-3: 2011 Lamp controlgear — Part 2-3: Particular requirements for a. c. supplied electronic ballasts for fluorescent lamps EN 61347-2-7: 2012 Lamp controlgear — Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) EN 61347-2-8: 2001 + Corrigendum:2003 + A1:2006 + Corrigendum:2010 Lamp controlgear — Part 2-8: Particular requirements for ballasts for fluorescent lamps EN 61347-2-9: 2001 + Corrigendum:2003 + A1:2003 + A2:2006 + Corrigendum:2010 Lamp controlgear — Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) EN 61347-2-10: 2001 + A1:2009 + Corrigendum:2010 Lamp controlgear — Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) EN 61347-2-11: 2001 + Corrigendum:2002 + Corrigendum:2010 Lamp controlgear — Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires EN 61347-2-12: 2005 + A1:2010 Lamp controlgear — Part 2-12: Particular requirements for d. c. or a. c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) EN 61347-2-13: 2006 Lamp controlgear — Part 2-13: Particular requirements for d. c. or a. c. supplied electronic controlgear for LED modules EN 61549: 2003 + A1:2005 + A2:2010 Miscellaneous lamps EN 62031: 2008 LED modules for general lighting — Safety specifications EN 62034: 2006 Automatic test systems for battery powered emergency escape lighting EN 62035: 2000 + A1:2003 Discharge lamps (excluding fluorescent lamps) — Safety specifications EN 62471: 2008 Photobiological safety of lamps and lamp systems IEC/TR 62471-2: 2009 Photobiological safety of lamps and lamp systems — Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety 2/5 Form_EC_120430 EC-Declaration of Conformity Annex Document number: 2012 / QTIS e_03 EN 62560: XXXX Self-ballasted LED-lamps for general lighting services by voltage > 50 V — Safety specifications The conformity of the designated product(s) with the provisions of the European Directive 2004/108/EC is given by the compliance with the following European Standard(s). If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 55015: 2006 + A1:2007 + A2:2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EN 61000-3-2: 2006 + A1:2009 + A2:2009 Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) EN 61000-3-3: 2008 Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subjected to conditional connection EN 61547: 2009 Equipment for general lighting purposes — EMC immunity requirements The conformity of the designated product(s) with the provisions of the European Directive 1999/5/EC is given by the compliance with the following European Standard(s). If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. ETSI EN 300 220-1 V2.1.1: Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods ETSI EN 300 220-2 V2.1.2: Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive ETSI EN 301 489-1 V1.8.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements ETSI EN 301 489-3 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz 3/5 Form_EC_120430 EC-Declaration of Conformity Annex Document number: 2012 / QTIS e_03 The conformity of the designated product(s) with the provisions of the European Directive 2009/125/EC is given by the compliance with the following European Standard(s). If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 50294: 1998 + A1:2001 + A2:2003 Measurement method of total input power of ballast-lamp circuits EN 62442-1: 2011 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear 4/5 Form_EC_120430 EC-Declaration of Conformity Attached list Document number: 2012 / QTIS e_03 QTIS e 1x18/220-240 QTIS e 1x36/220-240 QTIS e 1x58/220-240 QTIS e 2x18/220-240 QTIS e 2x36/220-240 QTIS e 2x58/220-240 QTIS e 3x18,4x18/220-240 QTIS e 3x36/220-240 CW 5/5 Form_EC_120430