EC-Declaration of Conformity Document number: 2015 / 9C1 -3249714-EN-00 Manufacturer or representative: OSRAM GmbH Address: Marcel-Breuer-Str. 6 80807 München Germany Brand name or trade mark: OSRAM Product type: LED Module Product designation: PLG2 DC OSRAM 0 M See attached list The designated product(s) is (are) in conformity with the provisions o f t h e following European Directives. El 2006/95/EC and amendments Directive ofthe European Parliament and ofthe Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits • 2004/108/EC and amendments Directive ofthe European Parliament and ofthe Council of 15 September 2004 on the approximation ofthe laws ofthe Member States relating to electromagnetic compatibility M 2009/125/EC and amendments Directive ofthe European Parliament and ofthe Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products • 244/2009 and amendments Commission Regulation (EC) implementing Directive 2005/32/EC ofthe European Parliament and ofthe Council with regard to ecodesign requirements for non-directional household lamps • 245/2009 and amendments Commission Regulation (EC) implementing Directive 2005/32/EC ofthe European Parliament and ofthe Council with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC ofthe European Parliament and ofthe Council El 1194/2012 and amendments Commission Regulation (EU) No 1194/2012 of 12 December 2012 implementing Directive 2009/125/EC ofthe European Parliament and ofthe Council with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment 2011/65/EU and amendments Directive of the European Parliament and of the Council of 8 June 2011 on the restriction ofthe use of certain hazardous substances in electrical and electronic equipment 1999/5/EC Directive ofthe European Parliament and ofthe Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity • and amendments • Last two digits of the year in which the CE marking was affixed: 15 Place and date of signatur|^^LQij^,(1^jp(8p2015 3M&EHS LAB \ Signatures: Names: jJf^O C&f Quality Management Quality Assurance Mr. Alwin Veser Mr. Bernhard Schemmel This declaration of conformity is issued under the sole responsibility of the manufacturer or representative. It certifies compliance with the indicated Directives, but implies no warranty of properties. 1/8 1051 01/2015 EC-Declaration of Conformity Annex Document number: 2015 / 9C1-3249714-EN-00 The conformity of the designated product(s) with the provisions of the European Directive 2006/95/EC is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 60155: 1995 + A1:1995 + A2:2007 Glow-starters for fluorescent lamps EN 60432-1: 2000 + A1:2005 + A2:2012 Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes EN 60432-2: 2000 + A1:2005 + A2:2012 Incandescent lamps — Safety specifications — Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes EN 60432-3: 2013 Incandescent lamps — Safety specifications — Part 3: Tungsten halogen lamps (non-vehicle) EN 60598-1: 2008 + A11:2009 Luminaires — Part 1: General requirements and tests EN 60598-2-1: 1989 Luminaires — Part 2-1: Particular requirements — Fixed general purpose luminaires EN 60598-2-2: 2012 Luminaires — Part 2-2: Particular requirements — Recessed luminaires EN 60598-2-3: 2003 + A1:2011 Luminaires — Part 2-3: Particular requirements — Luminaires for road and street lighting EN 60598-2-4: 1997 Luminaires — Part 2-4: Particular requirements — Portable general purpose luminaires EN 60598-2-5: 1998 Luminaires — Part 2-5: Particular requirements — Floodlights EN 60598-2-6: 1994 + A1:1997 Luminaires — Part 2-6: Particular requirements — Luminaires with built-in transformers for filament lamps EN 60598-2-7: Luminaires — Part 2-7: Particular requirements — Portable luminaires for garden 1989 + A2:1996 + A13:1997 use EN 60598-2-8: 2013 Luminaires — Part 2-8 : Particular requirements — Handlamps EN 60598-2-10: 2003 Luminaires — Part 2-10: Particular requirements — Portable luminaires for children EN 60598-2-12: 2013 Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights EN 60598-2-13: 2006 + A1:2012 Luminaires — Part 2-13: Particular requirements — Ground recessed luminaires EN 60598-2-20: 2010 Luminaires — Part 2-20: Particular requirements — Lighting chains EN 60598-2-22: 1998 + A1:2003 + A2:2008 Luminaires — Part 2-22: Particular requirements — Luminaires for emergency lighting EN 60968: 2013 Self-ballasted lamps for general lighting services — Safety requirements EN 61195: 1999 + A1:2013 Double-capped fluorescent lamps — Safety specifications 2/8 1051 01/2015 EC-Declaration of Conformity Annex Document number: 2015 / 9C1-3249714-EN-00 The conformity of the designated product(s) with the provisions of the European Directive 2006/95/EC is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 61199: 2011 + A1:2013 Single-capped fluorescent lamps — Safety specifications EN 61347-1: 2008 + A1:2011 EN 61347-2-1: 2001 + Corr. 2003 + A1:2006 + Corr. 2006 + Corr. 2010 + A2:2014 EN 61347-2-2: 2012 Lamp controlgear — Part 1: General and safety requirements EN 61347-2-3: 2011 Lamp controlgear — Part 2-3: Particular requirements for a. c. and/or d. c. supplied electronic ballasts for fluorescent lamps EN 61347-2-7: 2012 Lamp controlgear — Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) EN 61347-2-8: 2001 + Corrigendum: 2003+ A1:2006 + Corrigendum:2010 EN 61347-2-9: 2013 Lamp controlgear — Part 2-8: Particular requirements for ballasts for fluorescent lamps EN 61347-2-10: 2001 + A1:2009 + Corrigendum:2010 Lamp controlgear — Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) Lamp controlgear — Part 2-1: Particular requirements for starting devices (other than glow starters) Lamp controlgear — Part 2-2: Particular requirements for d. c. or a. c. supplied electronic step-down convertors for filament lamps Lamp controlgear — Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) EN 61347-2-11: Lamp controlgear — Part 2-11: Particular requirements for miscellaneous 2001 + Corrigendum:2002 + electronic circuits used with luminaires Corrigendum:2010 EN 61347-2-12: 2005 + A1:2010 Lamp controlgear — Part 2-12: Particular requirements for d. c. or a. c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) EN 61347-2-13: 2006 + Corr. 2010 Lamp controlgear — Part 2-13: Particular requirements for d. c. or a. c. supplied electronic controlgear for LED modules EN 61549: 2003 + A1:2005 + A2:2010 + A3:2012 Miscellaneous lamps EN 62031: 2008 + A1:2013 LED modules for general lighting — Safety specifications EN 62034: 2012 Automatic test systems for battery powered emergency escape lighting EN 62035: 2000 + A1:2003 + A2:2012 Discharge lamps (excluding fluorescent lamps) — Safety specifications 3/8 1051 01/2015 EC-Declaration of Conformity Annex Document number: 2015 / 9C1-3249714-EN-00 The conformity of the designated product(s) with the provisions of the European Directive 2006/95/EC is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 62493: 2010 Assessment of lighting equipment related to human exposure to electromagnetic fields EN 62532: 2011 Fluorescent induction lamps — Safety specifications EN 62560: Self-ballasted LED-lamps for general lighting services by voltage > 50 V — Safety specifications 2012 EN 60669-2-1: 2004+A12009 EN 62471: 2008 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches (IEC 60669-2-1:2002, modified) / Corrected and reprinted in 2007-12 Photobiological safety of lamps and lamp systems 4/8 1051 01/2015 EC-Declaration of Conformity Annex Document number: 2015 / 9C1-3249714-EN-00 The conformity of the designated product(s) with the provisions of the European Directive 2004/108/EC is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 55015: 2006+A1:2007+A2:2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EN 61000-3-2: 2006+A1:2009+A2:2009 Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) EN 61000-3-3: 2008 Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subjected to conditional connection Equipment for general lighting purposes — EMC immunity requirements EN 61547: 2009 EN 50498: 2010 Electromagnetic compatibility (EMC) – Product family standard for aftermarket electronic equipment in vehicles 5/8 1051 01/2015 EC-Declaration of Conformity Annex Document number: 2015 / 9C1-3249714-EN-00 The conformity of the designated product(s) with the provisions of the European Directive 2009/125/EC is given by the compliance with the following European Standard(s). If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 50294: 1998 + A1:2001 + A2:2003 Measurement method of total input power of ballast-lamp circuits EN 62442-1: 2011 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear EN 62442-2: 2014 Energy performance of lamp controlgear – Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) – Method of measurement to determine the efficiency of the controlgear EN 62442-3: 2014 Energy performance of lamp controlgear – Part 3: Controlgear for halogen lamps and LED modules – Method of measurement to determine the efficiency of the controlgear The conformity of the designated product(s) with the provisions of the European Directive 2011/65/EU is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 50581: 2012 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances Internal report no.: 2A1 3260651 6/8 1051 01/2015 EC-Declaration of Conformity Annex Document number: 2015 / 9C1-3249714-EN-00 The conformity of the designated product(s) with the provisions of the European Directive 1999/5/EC is given by the compliance with the following European Standard(s). If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. ETSI EN 300 220-1 V2.1.1: Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods ETSI EN 300 220-2 V2.1.2: Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive ETSI EN 301 489-1 V1.8.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements ETSI EN 301 489-3 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz EN 60590-1: 2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 + A2:2013 Information technology equipment – Safety – Part 1: General requirements EN 60825-1: 2014 Safety of laser products - Part 1: Equipment classification and requirements (IEC 60825-1:2014) / Endorsement notice EN 60065: 2002 + A1:2006 + Cor.:2007 + A11:2008 + A2:2010 + A12:2011 Audio, video and similar electronic apparatus - Safety requirements 7/8 1051 01/2015 EC-Declaration of Conformity Attached list Document number: 2015 / 9C1-3249714-EN-00 PLG2-BAR-1100-XYY-280x55-DC PLG2-BAR-2200-XYY-560x55-DC PLG2-AR-2250-XYY-495x245-DC Name coding : PLG2-BAR-1100-XYY-280x55-DC 1100 : X: YY: 280x55: DC: lumen output Ra index e.g. 8 = 80 color temperature e.g. 30 = 3000K dimensions operate with DC current 8/8 1051 01/2015