SAW Components SAW Duplexer Automotive telematics Series/type: Ordering code: B4400 B39212B4400P810 Date: Version: November 07, 2014 2.3 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Application ■ Low-loss SAW duplexer for W-CDMA Band 1 (UMTS) systems Low insertion attenuation Low amplitude ripple Usable passband 60 MHz Single-ended to balanced transformation in Antenna-Rx path ■ Impedance transformation 50 Ω to 100 Ω in Antenna-Rx path ■ High isolation between Tx and Rx ■ ■ ■ ■ 0.43 mm2 2 3 4 8 0.29 9 6 5 bottom view 0.29 7 0.7 0.45 max. Package size 2.0 * 1.6 Package height max. 0.45mm RoHS compatible Approximate weight 0.005 g Package for Surface Mount Technology (SMT) Ni terminals, Au-plated AEC-Q200 qualified component family (operable temperature range -40˚C to +85˚C) ■ Electrostatic Sensitive Device (ESD) ■ ■ ■ ■ ■ ■ ■ 0.33 1 0.35 Features side view 2.0 5 4 6 8 1.6 7 1 2 top view 3 Pin configuration ■ ■ ■ ■ 3 1, 8 6 2, 4, 5, 7, 9 1 Tx input Rx output (balanced) Antenna To be grounded 3 8 4,5,9 2,7 6 Please read cautions and warnings and important notes at the end of this document. 2 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –20 ˚C to +85 ˚C ZTx = 50 Ω || 6.0 nH ZAnt = 50 Ω || 2.2 nH ZRx = 100 Ω (balanced) || 17 nH Characteristics Tx-Antenna min. Center frequency fc Maximum insertion attenuation 1922.4 ... 1977.6 αW-CDMA1) Amplitude ripple (p-p) 1922.4 ... 1977.6 MHz typ. @ 25 ˚C 1950.0 max. — 1.7 2.3 dB — 0.5 1.1 dB % MHz αW-CDMA1) MHz EVM2) Error Vector Magnitude 1922.4 ... 1977.6 MHz — 1.4 2.3 TX port VSWR 1920.0 ... 1980.0 MHz — 1.6 2.0 ANT port VSWR 1920.0 ... 1980.0 MHz — 1.4 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... α MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz αW-CDMA1) MHz MHz MHz MHz 45 43 40 41 42 42 43 34 30 12 46 31 30 28 18 69 64 47 45 46 47 48 39 36 33 54 38 36 34 22 — — — — — — — — — — — — — — — Attenuation 10.0 420.0 843.0 1565.0 1574.0 1577.0 1597.0 1605.0 1805.0 1865.0 2112.4 2400.0 2620.0 3830.0 5150.0 1) 2) 410.0 494.0 894.0 1574.0 1577.0 1586.0 1605.0 1805.0 1865.0 1880.0 2167.6 2500.0 2690.0 3970.0 5950.0 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 7 of this document. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 3 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –20 ˚C to +85 ˚C ZTx = 50 Ω || 6.0 nH ZAnt = 50 Ω || 2.2 nH ZRx = 100 Ω (balanced) || 17 nH Characteristics Antenna-Rx min. Center frequency fc Maximum insertion attenuation 2112.4 ... 2167.6 αW-CDMA1) Amplitude ripple (p-p) 2112.4 ... 2167.6 MHz typ. @ 25 ˚C 2140.0 max. — 2.2 2.4 dB — 0.4 0.8 dB % MHz αW-CDMA1) MHz EVM2) Error Vector Magnitude 2112.4 ... 2167.6 MHz — 1.0 2.0 ANT port VSWR 2110.0 ... 2170.0 MHz — 1.8 2.2 RX port VSWR 2110.0 ... 2170.0 MHz — 1.6 2.0 1) 2) Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 7 of this document. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 4 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –20 ˚C to +85 ˚C ZTx = 50 Ω || 6.0 nH ZAnt = 50 Ω || 2.2 nH ZRx = 100 Ω (balanced) || 17 nH Characteristics Antenna-Rx typ. @ 25 ˚C max. 45 50 33 25 41 40 28 53 55 49 45 44 45 32 — — — — — — — α Attenuation 10.0 1922.4 1980.0 2255.0 2400.0 2484.0 5600.0 1) min. ... ... ... ... ... ... ... 1920.0 1977.6 2025.0 2400.0 2484.0 5600.0 6000.0 MHz MHz αW-CDMA1) MHz MHz MHz MHz MHz dB dB dB dB dB dB dB Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 7 of this document. Please read cautions and warnings and important notes at the end of this document. 5 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –20 ˚C to +85 ˚C ZTx = 50 Ω || 6.0 nH ZAnt = 50 Ω || 2.2 nH ZRx = 100 Ω (balanced) || 17 nH Characteristics Tx-Rx min. typ. @ 25 ˚C max. α Differential Mode Isolation 1574.0 ... 1577.0 1922.4 ... 1977.6 2112.4 ... 2167.6 3830.0 ... 3970.0 5750.0 ... 5950.0 MHz MHz αW-CDMA1) MHz αW-CDMA1) MHz MHz 40 52 53 30 30 79 57 59 61 44 — — — — — dB dB dB dB dB Common Mode Isolation 1922.4 ... 1977.6 α MHz αW-CDMA1) 42 45 — dB 1) Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 7 of this document. Please read cautions and warnings and important notes at the end of this document. 6 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Annotation for characteristics section Attenuation of W-CDMA signal (Power Transfer Function, αW-CDMA) is determined by ∞ ∫–∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df with fCarrier according to 3GPP TS 25.101 (e.g. for UMTS pass band, fCarrier ranges from 1922.4 MHz (lowest Tx channel) to 2167.6 MHz (highest Tx channel)). Here, HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫–∞ HRRC ( f ) Please read cautions and warnings and important notes at the end of this document. 7 2 df = 1 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Maximum Ratings Operable temperature range Storage temperature range DC voltage ESD voltage Input power at 1920.0 ... 1980.0 MHz elsewhere 1) T Tstg VDC VESD Pin Pin –40/+85 –40/+85 0 501) 29 10 ˚C ˚C V V dBm dBm machine model, 10 pulses } continuous wave 50 ˚C, 5000h According to JESD22-A115A (machine model), 10 negative and 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 8 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Frequency Response TX-ANT Frequency Response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 9 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Frequency Response RX-ANT Frequency Response RX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 10 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Frequency Response TX-RX Frequency Response TX-RX (wideband) Please read cautions and warnings and important notes at the end of this document. 11 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Return Loss S11 TX- port S33 RX-port Please read cautions and warnings and important notes at the end of this document. S22 ANT-port 12 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet References Type B4400 Ordering code B39212B4400P810 Marking and package C61157-A8-A50 Packaging F61074-V8247-Z000 Date codes L_1126 S-parameters B4400_NB_UN.s4p, B4400_WB_UN.s4p See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2014. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 13 November 07, 2014 SAW Components B4400 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Please read cautions and warnings and important notes at the end of this document. 14 November 07, 2014