SAW Components, B8616

SAW Components
SAW Duplexer
W-CDMA Band V / CDMA 800
Series/type:
Ordering code:
B8616
B39881B8616P810
Date:
Version:
August 02, 2013
2.0
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Application
■ High linearity SAW duplexer for SV-LTE
■ Low-loss SAW duplexer for mobile telephone
W-CDMA Band 5 / CDMA 800 systems
■ Low insertion attenuation
■ Low amplitude ripple
■ 50Ω single-ended in both Antenna-Rx and
Tx-Antenna paths
0.4
0.55
6
5
9
4
0.3
7
3
8
Package size 2.5 x 2.0 mm2
Max. package height 0.53 mm
RoHS compatible
Approximate weight 0.009 g
Package for Surface Mount Technology (SMT)
Ni, Au-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sensitive Level 3
0.53 max.
■
■
■
■
■
■
■
■
0.4
Features
2
bottom view
1
0.9
side view
2.5
4
1
Pin configuration
■
■
■
■
1
3
6
2, 4, 5, 7, 8, 9
2
top view
3
2, 4, 5, 7, 8, 9
Tx input
Rx output
Antenna
To be grounded
1
3
6
Please read cautions and warnings and
important notes at the end of this document.
5
8
2.0
7 6
2
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Characteristics
Temperature range for specification:
Tx terminating impedance:
Ant terminating impedance:
Rx teminating impedance:
T
ZTx
ZAnt
ZRx
=
=
=
=
–30 ˚C to +90 ˚C
50 Ω
50 Ω || 8.7nH
50 Ω
Characteristics Tx-Antenna
Center frequency
min.
fc
Maximum insertion attenuation
@fCarrier 826.4 ... 846.6 MHz αWCDMA1)
824.0 ... 849.0 MHz
Amplitude ripple (p-p)
@fCarrier 826.4 ... 846.6 MHz ∆αWCDMA1)
824.0 ... 849.0 MHz
Tx port VSWR
824.0 ... 849.0 MHz
Ant port VSWR
824.0 ... 849.0 MHz
1)
—
MHz
—
—
1.2
1.5
2.0
2.5
dB
dB
—
—
0.5
0.9
1.3
1.9
dB
dB
—
1.7
2.0
—
1.6
2.0
35
38
35
35
35
33
5
45
43
40
35
34
33
28
25
20
13
10
10
45
43
40
41
42
42
22
51
48
44
40
39
37
34
34
31
21
16
17
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
α
Attenuation
10.0
420.0
494.0
701.0
728.0
764.0
860.0
@fCarrier 871.4
1565.0
1648.0
1884.0
1930.0
2110.0
2400.0
2500.0
3286.0
4255.0
4934.0
5725.0
max.
—
typ.
@ 25 ˚C
836.5
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
420.0 MHz
494.0 MHz
701.0 MHz
728.0 MHz
764.0 MHz
804.0 MHz
869.0 MHz
891.6 MHz αWCDMA1)
1606.0 MHz
1698.0 MHz
1919.0 MHz
1990.0 MHz
2170.0 MHz
2500.0 MHz
2547.0 MHz
3406.0 MHz
4600.0 MHz
5350.0 MHz
6000.0 MHz
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page 7.
Please read cautions and warnings and
important notes at the end of this document.
3
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Characteristics
Temperature range for specification:
Tx terminating impedance:
Ant terminating impedance:
Rx teminating impedance:
T
ZTx
ZAnt
ZRx
=
=
=
=
Characteristics Antenna-Rx
Center frequency
min.
fc
Maximum insertion attenuation
@fCarrier 871.4 ... 891.6 MHz αWCDMA1)
869.0 ... 894.0 MHz
Amplitude ripple (p-p)
@fCarrier 871.4 ... 891.6 MHz ∆αWCDMA1)
869.0 ... 894.0 MHz
Ant port VSWR
869.0 ... 894.0 MHz
Rx port VSWR
869.0 ... 894.0 MHz
...
...
...
...
...
...
...
...
...
447.0 MHz
824.0 MHz
846.6 MHz αWCDMA1)
854.0 MHz
970.0 MHz
1320.0 MHz
2180.0 MHz
4000.0 MHz
6000.0 MHz
IMD product level limits2)
at fTx=836.5 MHz, fRx=881.5 MHz
Blocker 1
45.0MHz
Blocker 2
791.5MHz
Blocker 3
1718.0MHz
Blocker 4
2554.5MHz
1)
2)
max.
—
typ.
@ 25 ˚C
881.5
—
MHz
—
—
1.4
1.7
2.2
2.6
dB
dB
—
—
0.4
0.7
1.2
1.6
dB
dB
—
1.7
2.1
—
1.8
2.1
50
45
50
30
10
30
40
40
25
63
59
55
53
25
39
50
51
31
—
—
—
—
—
—
—
—
—
—
—
—
—
-135
-125
-122
-135
-110
-110
-110
-110
α
Attenuation
10.0
447.0
@fCarrier 826.4
849.0
909.0
970.0
1360.0
2180.0
4000.0
–30 ˚C to +90 ˚C
50 Ω
50 Ω || 8.7nH
50 Ω
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
dBm
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page 7.
IMD product level limits for power levels PTx=21.5dBm (antenna port output power) and
PBlocker=-15dBm (antenna port input power).
Please read cautions and warnings and
important notes at the end of this document.
4
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Characteristics
Temperature range for specification:
Tx terminating impedance:
Ant terminating impedance:
Rx teminating impedance:
T
ZTx
ZAnt
ZRx
=
=
=
=
–30 ˚C to +90 ˚C
50 Ω
50 Ω || 8.7nH
50 Ω
Characteristics Tx-Rx
Isolation
@fCarrier 826.4
824.0
@fCarrier 871.4
869.0
1)
...
...
...
...
846.6 MHz
849.0 MHz
891.6 MHz
894.0 MHz
α
αWCDMA1)
αWCDMA1)
min.
typ.
@ 25 ˚C
max.
55
50
51
50
58
54
55
54
—
—
—
—
dB
dB
dB
dB
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page 7.
Please read cautions and warnings and
important notes at the end of this document.
5
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Characteristics
Temperature range for specification:
Tx terminating impedance:
Ant terminating impedance:
Rx teminating impedance:
T
ZTx
ZAnt
ZRx
Intermodulation Characteristics
SV-LTE coexistance
=
=
=
=
–30 ˚C to +90 ˚C
50 Ω
50 Ω || 8.7nH
50 Ω
min.
typ.
@ 25 ˚C
max.
Case 1 - IM3 in CDMA Cell Rx
fTx5
= 827.0 MHz
1)
PTx5
= 24.0 dBm
fjam13 = 782.0 MHz
Pjam131) = 14.0 dBm
fRx5
= 872.0 MHz
PRx5
—
-105
-95
dBm
Case 2 - IM3 in B13 Rx
fTx5
= 825.0 MHz
PTx51) = 14.0 dBm
fjam13 = 786.0 MHz
Pjam131) = 24.0 dBm
fRx13
= 747.0 MHz
PRx13
—
-135
-100
dBm
Case 3 - IM2 in CDMA Cell Rx
fTx5
= 833.0 MHz
PTx51) = 24.0 dBm
fjam4 = 1711.0 MHz
Pjam41) = -11.0 dBm
fRx5
= 878.0 MHz
PRx5
—
-115
-105
dBm
1)
Power level is reference at antenna port.
Please read cautions and warnings and
important notes at the end of this document.
6
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Maximum ratings
Storage temperature range
DC voltage
DC impedance to ground
ESD voltage
Input power at
824.0 ... 849.0 MHz
elsewhere
1)
2)
3)
Tstg
VDC
VESD
–40/+901)
52)
>100
1003)
˚C
V
MΩ
V
29
10
dBm
dBm
Pin
Pin
Machine Model
source and load impedance 50 Ω
continuous wave
T = 55 ˚C, 5000h
}
extended upperlimit: 168h@125˚C acc. to IEC 60068-2-2 Bb
168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy
acc. to JESD22-A115B (MM - Machine Model), 10 negative and 10 positive pulses.
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by
∞
∫∞ Sds 21 ( f )HRRC ( f – f Carrier )
2
df
fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 5-Passband, fCarrier ranges from
826.4 MHz (lowest Tx channel) to 846.6 MHz (highest Tx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the
following normalization:
∞
∫∞ HRRC ( f )
Please read cautions and warnings and
important notes at the end of this document.
7
2
df = 1
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Frequency response Tx-Antenna (power transfer function)
Frequency response Tx-Antenna (wideband)
Please read cautions and warnings and
important notes at the end of this document.
8
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Frequency response Antenna-Rx (power transfer function)
Frequency response Antenna-Rx (wideband)
Please read cautions and warnings and
important notes at the end of this document.
9
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Frequency response Tx-Rx (power transfer function)
Frequency response Tx-Rx (wideband)
Please read cautions and warnings and
important notes at the end of this document.
10
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
Return loss
S11 Tx-port
S22 Antenna-port
Please read cautions and warnings and
important notes at the end of this document.
11
S33 Rx-port
August 02, 2013
SAW Components
B8616
SAW Duplexer
836.5 / 881.5 MHz
Data sheet
References
Type
B8616
Ordering code
B39881B8616P810
Marking and package
C61157-A8-A86
Packaging
F61074-V8232-Z000
Date codes
L_1126
S-parameters
B8616_NB_UN.s3p, B8616_WB_UN.s3p
See file header for pin/port assignment.
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2013. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
12
August 02, 2013
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
13
August 02, 2013