SAW Components SAW Duplexer WCDMA Band 4/ CDMA 1x AWS Band Series/type: Ordering code: B8517 B39212B8517P810 Date: Version: June 4, 2013 2.0 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Application ■ Low-loss SAW duplexer for mobile telephone W-CDMA Band 4 (UMTS) systems Low insertion attenuation Low amplitude ripple Usable passband 45 MHz High isolation between Tx and Rx 0.43 0.33 1 2 3 4 9 7 6 5 bottom view 0.29 0.29 Package size 2.0 * 1.6 mm2 max. Package height 0.47 mm RoHS compatible Approximate weight 0.005 g Package for Surface Mount Technology (SMT) Ni terminals, Au-plated Electrostatic Sensitive Device (ESD) Fully matched by integrated matching network Moisture Sensitive Level 3 0.7 0.47 max. ■ ■ ■ ■ ■ ■ ■ ■ ■ 0.35 Features 8 ■ ■ ■ ■ side view 2.0 ■ ■ ■ ■ 3 6 1 2, 4, 5, 7, 8, 9 5 4 1 Pin configuration 6 8 1.6 7 2 3 1 Tx input Antenna Rx output To be grounded 3 7,8,9 2,4,5 6 Please read cautions and warnings and important notes at the end of this document. 2 June 4, 2013 top view SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +90 ˚C ZTx = 50 Ω ZAnt = 50 Ω ll 2.4 nH ZRx = 50 Ω ll 5.6 nH B8517 Characteristics Tx-Antenna typ. @ 25 ˚C 1732.5 max. 1.5 2.0 dB 1.4 1.9 dB 0.4 1.0 dB 0.4 0.9 dB 0.5 2.0 % Input VSWR (Tx port) 1710.0 ... 1755.0MHz 1.8 2.2 Output VSWR (Ant Port) 1710.0 ... 1755.0MHz 1.7 2.2 Center frequency min. fc Maximum insertion attenuation 1710.0 ... 1755.0MHz @fCarrier 1712.4 ... 1752.6MHz αW-CDMA1) Amplitude ripple (p-p) 1710.0 ... 1755.0MHz ... 1752.6MHz ∆αW-CDMA1) Error Vector Magnitude EVM2) @fCarrier 1712.4 ... 1752.6MHz @fCarrier 1712.4 Attenuation 10.0 728.0 851.0 1559.0 1565.0 1573.0 1577.0 1598.0 1805.0 1930.0 2110.0 @fCarrier 2112.4 2400.0 3420.0 4900.0 5265.0 1) 2) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... α 1559.0MHz 764.0MHz 894.0MHz 1563.0MHz 1573.0MHz 1577.0MHz 1585.0MHz 1606.0MHz 1880.0MHz 1990.0MHz 2155.0MHz 2152.6MHz αW-CDMA1) 2500.0MHz 3510.0MHz 5265.0MHz 5850.0MHz 30 42 39 40 41 45 42 38 20 42 42 42 32 20 18 14 MHz 47 46 44 47 48 51 51 45 47 48 46 47 38 27 28 25 Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 6. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 3 June 4, 2013 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +90 ˚C ZTx = 50 Ω ZAnt = 50 Ω ll 2.4 nH ZRx = 50 Ω ll 5.6 nH B8517 Characteristics Antenna-Rx Center frequency min. fc typ. @ 25 ˚C 2132.5 max. 1.9 2.3 1.8 2.2 0.4 0.9 0.4 0.8 dB 0.5 2.0 % 1.4 1.8 1.4 1.8 Maximum insertion attenuation 2110.0 ... 2155.0MHz @fCarrier 2112.4 ... 2152.6MHz αW-CDMA1) Amplitude ripple (p-p) 2110.0 ... 2155.0MHz ... 2152.6MHz ∆αW-CDMA1) Error Vector Magnitude EVM2) @fCarrier 2112.4 ... 2152.6MHz Input VSWR 2110.0 ... 2155.0MHz @fCarrier 2112.4 Output VSWR 2110.0 ... 2155.0MHz Attenuation 1.0 400.0 1710.0 @fCarrier 1712.4 1755.0 1910.0 2255.0 2400.0 2500.0 3820.0 4220.0 5530.0 5725.0 1) 2) ... ... ... ... ... ... ... ... ... ... ... ... ... α 1710.0MHz 400.0MHz 1755.0MHz 1752.6MHz αW-CDMA1) 2025.0MHz 1955.0MHz 6000.0MHz 2500.0MHz 3820.0MHz 3910.0MHz 4310.0MHz 5665.0MHz 5875.0MHz 40 50 45 45 15 35 30 40 35 35 34 32 32 MHz 51 70 51 51 40 45 39 50 42 42 41 40 40 Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 6. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 4 June 4, 2013 dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +90 ˚C ZTx = 50 Ω ZAnt = 50 Ω ll 2.4 nH ZRx = 50 Ω ll 5.6 nH B8517 Characteristics Tx-Rx Isolation 1574.0 1710.0 1712.4 2110.0 2112.4 3410.0 5120.0 1) ... ... ... ... ... ... ... 1577.0 1755.0 1752.6 2155.0 2152.6 3520.0 5275.0 α MHz MHz MHz αW-CDMA1) MHz MHz αW-CDMA1) MHz MHz min. typ. @ 25 ˚C 40 52 52 50 50 20 20 63 56 56 61 62 52 48 max. Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 6. Please read cautions and warnings and important notes at the end of this document. 5 June 4, 2013 dB dB dB dB dB dB dB SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Annotation for characteristics section Attenuation of W-CDMA signal (Power Transfer Function, αW-CDMA) is determined by ∞ ∫–∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df with fCarrier according to 3GPP TS 25.101 (e.g. for UMTS pass band, fCarrier ranges from 1712.4 MHz (lowest Tx channel) to 1752.6 MHz (highest Tx channel)). Here, HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫–∞ HRRC ( f ) Please read cautions and warnings and important notes at the end of this document. 6 2 df = 1 June 4, 2013 SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Maximum Ratings Storage temperature range DC voltage DC impedance to ground ESD voltage Input power at 1710.0 ... 1755.0 MHz elsewhere 1) 2) Tstg VDC VESD Pin Pin –40/+90 51) > 100 502) ˚C V MΩ V 29 10 dBm dBm machine model, 10 pulses } continuous wave 50 ˚C, 5000h min. 168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy. According to JESD22-A115A (machine model), 10 negative and 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 7 June 4, 2013 SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Power Transfer Function Tx-Ant: Power Transfer Function Tx-Ant (wideband): Please read cautions and warnings and important notes at the end of this document. 8 June 4, 2013 SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Power Transfer Function Ant-Rx: Power Transfer Function Ant-Rx (wideband): Please read cautions and warnings and important notes at the end of this document. 9 June 4, 2013 SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet Power Transfer Function Tx-Rx isolation: Power Transfer Function Tx-Rx isolation (wideband): Please read cautions and warnings and important notes at the end of this document. 10 June 4, 2013 SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet VSWRs at Tx, Rx and Ant: Please read cautions and warnings and important notes at the end of this document. 11 June 4, 2013 SAW Components B8517 1732.5 / 2132.5 MHz SAW Duplexer Data Sheet References Type B8517 Ordering code B39212B8517P810 Marking and package C61157-A8-A76 Packaging F61074-V8247-Z000 Date codes L_1126 S-parameters B8517_NB_UN.s3p, B8517_WB_UN.s3p See file header for pin/port assignments Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2013. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 12 June 4, 2013 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 13 June 4, 2013